mk4 and B5 Remote Learning with VCDS by Ross Tech

My car didn't have any fob but I managed to adaption to immobilizer so I can start the car but can't use the button yet. So this is the procedure to maybe make it?😀

Thank you!

I do all 1:1, the vehicle gave me a horn Signal but the keys does not work !

Hi,
I would like to ask Your help in issue regarding to key remote adaptation.
So basically during adaptation of key I am going to Modul 35(46 is unavailable as my car from 2000 year Audi A4B5 1.8T) then block 10-->00 channel-->SAVE and when I'm going to 01 or 21 channel every time I get ERROR message - The channel is unavailable and I cannot match the key, the each block is inactive.
What could be the problem, why the blocks are inactive???

I don’t this 46 in my car how to install sir?

This will work for my 2003 Octavia Confort? I bought it last year and I don't have a remote key.. just one key with a light button. I bought an remote key and I want to adapt it just for lock/unlock. I don't want to start the engine with it.

Hi! One of my remotes suddenly stopped working. It starts the car but doesn't lock/unlock the doors. I did exactly as in the clip. When I press lock button on each remote, the car gives me the confirmation blink for each one. But after I exit controller and try the remotes only one works. The one which stopped working still doesn't lock unlock the doors. When I get back on the adaptation page it shows that only one key is programmed. No matter how many times I try the procedure in the video, it goes back to only one key. Any help would be appreciated! Best regards!

Will this procedure work for 2012 Jetta? If anyone can help I would really appreciate it.

Hello, I have 2 aftermarket keys. When I want to program both, only the first one work. The 2 keys work fine... but I can't program for to use keys at the same time

ace video lads it worked a treat 👌👍 VW garage wanted my car all day to do this it just took me under a minit

hello i have a mk4 but
I encountered a problem with this method with the code 01030 I checked the wiring and the serings without result; but when I put 2 key value the test icon and disappeared to test before the backup, thank you for helping me

J'ai constaté refus de programtion est se qu'il ya un solution pour ce problem

I have Audi Q7 with 4L seventh and eighth VIN number how to program key remote

Mine just goes channel 01 error

Thank you

Is this working for Audi a3 8p 2006

I dont see 1V . Where can I find that. Or is 1J the same as 1V ?

hi!
this work on preface a4 also? 1997

is this using the lite version or the full version. ???

Can I apply this for an aftermarket remote also?

Thank you brother !

Thanks - will give it a go! 👍

I don't have the option for remote control adaptation but I have the option personalised key 1

I've tried this on a 6L Seat Ibiza but the remote is not being learned, I think the key might be bad however the red light comes on when pushing buttons, and the key is programmed and starts the car fine.

I think I ran into an anomaly. I am able to program the remotes to the car through VCDS (gentle horn honk when programming for both remotes), but when I attempt to lock/unlock the car afterwards nothing happens. Live data of the remote fob input shows no activity. The alarm will activate/deactivate through the key in the door method. The non-VDCS method of programming the remote does not work either. Anyone ever run into this and find a solution?

Very Helpful, thank you!

Is there a video on how to program 1 brand new key fob? My friend lost all his keys, bought a new one from dealer and has been cut by his VIN. Now he has a brand new unprogrammed key fob.

Its gonna be work with 3C 2006 VW Passat? 

Thanks

I forgot to mention my VW is a 2004 Jetta TDI (MK4  9M)

Yes all 3 fobs work, it will just program the first 2 in what ever combination I do them in.

Will this work just recoding my key? i only have one but it doesn't work anymore so i just want to recode it 

Tried it 3 times and was only able to get it to program 2 FOBs at a time...Yes I entered 3 in the new value box. I thought I read somewhere I could program up to 3 FOBs... Happy with 2 if that is all I can program.

does this work the same with 2001 audi tt 225hp ?

Thanks for the tip Benjamin! I was trying the single digit input as well and it wasn't working. Tried two digit (02) and all is well! :)

I was finally able to make it work by typing "02" in the new value field instead of "2"  thanks for the good video.

Is there a way to check if there's an actual signal being sent from the key fob to the car?

I'm having the same problem. Got two working keys, followed the instructions step by step and nothing. I've even tried the simple method of using the key in the door and that doesn't work, getting no confirmation from the car.

Provided you have the correct vehicle and are following the instruction correctly, if you are having issues, then maybe the control module in the car is failing, or you have a bad remote. These instructions are correct for the applications listed. It would appear you have 2 remotes... can you learn just 1 remote at a time?

does not work, i change it to 2 keys, but it goes back to 1, wont let me save the 2

Luke. VCDS can program both the remotes and the immobilizer to accept the new key chip ( there is an RFID chip in the flip part of the key, has nothing to do with the RKE buttons. But you will need a 4 digit pin code. VCDS can not determine this code. Dealers can not look up the VIN for this code. A good Locksmith will have special software the PIN CODE. Align yourself with such a firm. This pin is needed for certain instrument cluster work as well as key programming

We just added VCDS to our arsenal of equipment for servicing VW and Audi locking systems and remotes. Of course, VCDS does not read PIN codes, we have other means to do that. But our other tools did not have the ability to do diagnostics of the cars' systems in relation to the keyless remote entry for certain models. This alone is very useful for models that do not have simple on-board programming ( self-learning ).

works perfec

thanks for the help!!!

This wont work for me, does it need certain keys?