Комментарии:
Ja pierdole .... 🤦
ОтветитьHi mate I have bmw x5 e53 my fob key not working to lock unlock I got new key from bmw so it not the key iv tried to do the thing were you put key in twist one click and press the buttons dint work iv checked the fuses fine It work on the button in the car I don't no what else it could be just wondering if you have any idea
Ответитьwhy can you not delete the ews?
ОтветитьI have a 2007 x3..I have run all the BMW software diags from my laptop, everything checks out except, the immobilizer will not communicate. it says the immobilizer is bad? What to do? An immobilizer module is not even available anymore?
ОтветитьI’m working on a BMW X6 Hybrid. The EWS does not even come up on the menu but it has an ews code that’s why it won’t start
ОтветитьHola tengo una x3 que no prende y me da este codigo
ОтветитьGot a 98 318ti and it seems to have a EWS issue......need to fix this.
ОтветитьI got crank no spark no fuel coming from injectors code is 2f44 how to clear this or delite ews and where u based any way u can do it ?
ОтветитьHi series bmw 320i. 2017. Is it possible to aliign ews with dme with autel pro please ? Cranks over non start fault code B12304 fault code
ОтветитьMy bmw x6 cranking but not starting and it’s making a beep noise like a small alarm or warning, I took of the battery to charge and when I placed it back this is what’s happening, what could be the issue ?
ОтветитьThis might not make sense but would having a not name brand BMW key throw my car into limp mode it keeps happening and only started after I got the key
ОтветитьToo bad as well cannot afford membership in poor country like Philippines,
ОтветитьHey can u help me i have a bmw318i auto 2009 petrol
When i try to start the engine it moves a little and stops , like it feels the starter is not able to rotate the engine even one round . What should i do with it as i removed the belt to see and as i press start button the engine round moves a little and then stops
How do you sync it? I am currently using maxipro mp808?
ОтветитьHow do u unlock the ews please or since them
ОтветитьHi there. I have an E46 320i and I had a big problem that took me a long time to figure out. I checked the battery, the starter and even replaced the ignition switch. No crank and no start. I discovered by accident that the fault was in the immobilizer. It had a broken capacitor. The repair cost €0.50 but took two years to discover. No need to replace the immobilizer. It was just repaired. To this day the car has never broken down again.
ОтветитьHow u sincronise the ecu key and ews my car dont star after a change the battery I have an autel im608 thanks
ОтветитьHey Doc. E39 530I Is there a way to use junk yard ECU from different vehicle and start the car with original key
ОтветитьDo you really have to play that crappy ass music.
Ответитьcan you do this with inpa ? i dont have an autel
Ответитьmate got a 2014 BMW 535d f10 DDE issue no start but no run. had countdown and I regened it twice replace the ad def control unit under car and now cannot regen anymore. car will turn over but will not run. something about the DDE control unit. any ideas?
ОтветитьI've got crank but no start
ОтветитьDean I need your help
ОтветитьIs this applicable to the 2007 BMW Z4 E85? Also is your video about bypassing/deleting the EWS?
Ответитьrewrite the vin number on a new control broad
Ответитьhello, can i ercode my bmw e46 control broad
Ответитьis the ignition barrel coded to the ews? i knoiw the key is but if the transponder is coded for the ews but will the actual barrel work with a new ews?
ОтветитьHow to manually override ( thief proofing system) in e34 525 non vanos year 1991 m50 engine? I dont have a scanner tool.
ОтветитьGive me a call i have questions about my bmw
ОтветитьIf your bateri empty end ews activ ortaya manupule call bmw hot line they come in a hour end coding again cost about in Germany 80 eur
ОтветитьHow would you ho about re-syncing your EWS back to the vehicle?
ОтветитьMy car dose this if i change ews ecu an key barrel would it sort it ?
ОтветитьHello Doctor , my car is locking and unlocking constantly when is too warm outside , and recently my car cranks everything is good but doesnt start , i checked the EWS thing and when i pull it 1 pin was broken and 1 was coroded do you think the ews might stop my car from turning on cuz it cranks but doesnt start... Thanks .
ОтветитьHi I have a 2004 e60 v8
The problem I have is that the car won’t star crank but is all it does
The p320d and p0444 are showing on my scanner do you think that’s cause the problem ?
Fucking really nice thank you so much bruv.
I believe i can do the same wiv ma IM508.
Could all these be ok and the ews relay is bad and still cause a no crank/ no start.?
ОтветитьHows things Doctor,, can you tell me? I have converted a pre lci 535d with the old key into a lci 2008 e61 with the newer key. To save me the wiring headache Can you delete ews function from a 2005 535d dde? Thanks
ОтветитьOne day my car stopped cranking... I thought it might have been the starter, so to check i popped the clutch and it turned on... no big deal I figured ill get a starter and rode it lie that for about a week... a week later... popping the clutch wouldn't start it... could it be my key?
ОтветитьHi I've got an X3 2006 2.0 diesel no crank no start came up with fault code 4a42 on snap on any ideas both keys are OK have had them checked by locksmith and he said there's nothing wrong with the keys
ОтветитьWill this Autel MaxiFlash Elite J2434 ECU Programming Device reset my EWS immobilizer on my 2006 BMW 550i E60?? After having my car shut down while driving, then trying to restart the car more than 20-30-40 times, the immobilizer is tripped and I need something I can do at home to reset this. The car just cranks and cranks, no start.
ОтветитьI’m using an Autel MX808 and when I try selecting “EWS Vehicle immobilizer” it just tells me “tester not communicating with control unit.” Is my ews not working at all or do I need to be using a different scanner? It’s a 2000 323i
ОтветитьCan the EWS on the e38 be removed to install a remote starter ?
Ответитьneed to know how to de imobilise the engine to run engine in another vehicle i know it can be done but how
ОтветитьHello, I have a '91 E31 850i. I pulled the engine harness last weekend so I could insulate the fuel rails and I kept the car outside in case of any gas spills. Well, over the period of several days I had car opened or locked, hood or trunk open, while locked, so I think I have messed up the immobilizer. I cannot seen to override this feature even following the owner's manual instructions. OBC is also looking for 'CODE ----' but I have no idea what number previous owner might have used. Any suggestions? Thanks,
ОтветитьHi:thank you for all video, I have problem with my e65, by mistake I was reset ews with Inpa,now is trying to synce ews and DME but red flag shoow and can't synce. so car now is cranking but no start. How you can help me tnx.
ОтветитьHad a similar problem, car starts drives, then when I come back to it it’s dead...! So I got out the car locked it with the key button and then opened it with just the key in the lock...the alarm went off so I pressed the key fob and then was able to switch the car back on 🤷🏻♂️ very strange
ОтветитьSo I have a problem with my e46 it has ews 4.3. every two weeks or even more often the imobilizer disconects, not the key. I've tried changing the key battery, changing the key, changing the car battery, nothing worked. People tell me that I have to change the ECU, EWS, key and lock. Is there a bypass for this?
ОтветитьTake a breath😂😂😂😂😂😂😁👍, have got 2f44 code on a 2005 116 manual , after starter replaced for none crank , fault won't clear , car cranks over , tried to realign key with autoboss v30 , no communication? , But if I try key it's showing signal on both keys , number 2 and number 3 key , can get fuel pump to work off scanner to test , rev counter moves on cranking
ОтветитьHey doc, I have the Autel MaxiMK808. Great tool, thanks for recommending! I’ve had a no crank no start since changing out my starter. The charging cable on it was not working (the starter was fine). I have a brand new Bosch starter on it now. Anyways, my EWS system has some fault codes for being under voltage And not being able to communicate with the computer, so I cleared the codes and made sure my battery was fully charged. My live data page looks the exact same as yours (should be no issues). It’s still a no crank no start. Any ideas on where to go after this?
ОтветитьIs there any way I can contact u in a personal manner? Email or any other method?
Ответить