YAESU FTM500 , HINT TIPS - LEARNING

YAESU FTM500 , HINT TIPS - LEARNING

8,333 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

@robertkeller9828
@robertkeller9828 - 21.05.2023 11:09

Overpriced gimmick that's useless for Simplex Operations, aka when the SHTF!. IF you want to play "Internet" just USE your damn phone!

Ответить
@michealcade7313
@michealcade7313 - 21.05.2023 11:13

Thank you for posting. Very Helpful.

Ответить
@halchita8701
@halchita8701 - 21.05.2023 14:58

Excellent overview

Ответить
@KO4DKN
@KO4DKN - 21.05.2023 15:34

Does anyone know how to “lock out” a unwanted channel?

Ответить
@kb9liq
@kb9liq - 22.05.2023 02:48

More info on how you setup and were using this with a hotspot please

Ответить
@ThatCleanMT
@ThatCleanMT - 26.05.2023 03:26

Do you know why when I press “P4” on my mic, all I get is an audible tone with no weather channel audio?

Ответить
@m0aze611
@m0aze611 - 07.07.2023 11:57

I’m looking seriously at this radio and it’s seems to be a bit Marmite. I want it for mobile use but don’t see many U.K. based hams using it outside of their QTH. So how simple would it be to use under mobile conditions? Don’t mind programming at home APRS is not something I’ve ever used. Welcome feedback regards Mike

Ответить
@user-cu4rt2bq2l
@user-cu4rt2bq2l - 28.07.2023 22:27

For anyone considering a mobile dual-bander to install in a vehicle with the head separated from the transceiver body you should be aware of the following:

I was planning to save a few dollars and get the FTM-300DR which seemed to have all of the operational features I wanted and more. However, when I looked closely at how to actually install it into the vehicle I saw a different picture. If the transceiver is mounted in the back of the vehicle and the control head in the front, the FTM-300 requires three separate cables go go between the transceiver and the control head. 1. The control cable, 2. a microphone cable (there's no mic jack in the head) and 3. a speaker wire, and you will probably need to buy and mount a separate speaker up front (there's no speaker or speaker jack in the FTM-300 control head). The FTM-500, by comparison has speakers in both the control head and the transceiver body and has microphone jacks in both places as well. So all you need is a single control cable between the two parts.

A much simpler installation.

Ответить
@jasonlau3635
@jasonlau3635 - 23.09.2023 00:32

I like how you used the tape on the sdram micro card. I've ran into issues on other things (like zumspot) where it's incredibly hard to grab and pull the sd card out without.

Ответить
@maritimedronefilming9511
@maritimedronefilming9511 - 29.09.2023 16:49

is there a way to swop that distance from km to miles

Ответить
@N4DJC
@N4DJC - 13.10.2023 00:57

Andreas, can the main speaker be muted? If so, how does the front alone sound?

Ответить
@opalmike1
@opalmike1 - 11.03.2024 06:14

This was very informative. 73

Ответить
@thomashenderson603
@thomashenderson603 - 13.03.2024 18:34

under display backtrack i have just a grey screen with headings, how do I get it back to a compass like yours? Tom K1CXS

Ответить
@jamespuckett6457
@jamespuckett6457 - 19.03.2024 04:02

Finally installed my FTM-500 after running the 400 in my Toyota for 2 years. I love the PMG function. Is there a way to scan the memory without scanning the WX frequencies?

Ответить
@samallenby571
@samallenby571 - 01.04.2024 20:50

When I’m on my hotspot, it is not as clear as yours. Do I need some settings set up for C4FM. It just keeps dropping out

Ответить