DIY- How to Diagnose a No Start LIKE A BOSS!!!!

The depth you go into is nice to see !!

I have no power to injectors no flash on noid light

Sorry, I struggle with mechanics but trying really hard to learn..

What was the problem with the car in the end??

Did the wires that were bent were replaced...

What wires were bent?? Was it loose connection??



God bless you all

Man you are so good. Come fix my no start issue!

I have a 2001ford f1504,6that gets power to the injection but will not pulse the injections

"Yo! Science, b*tch!"

In Jessie Pinkman's voice (Breaking Bad)😂😂😂

[thank, you for you're video. I, have a 2004, x. type 3.0 jaguar. I, don't have a no crank and a no start. so, what I did was to take the starter relay out of the fuse box then use a jumper wire to jump over the starter so then the jaguar starter turned over but would not start. so I then shot 2 sprays of starting fluid in to the air box then the jaguar started on the starting fluid. so now I need to drop the fuel tank and replace the electric fuel pump inside the fuel take. I, did notice I've got 3 fault codes poping up on the cluster gauge. so, I'm. going to replace the electric fuel pump sents I ruled that out.) one, problem can have many factors.👍

“So this really blows”😂😂😂

I sure hope the car owner at least tried to pay you something. You're a member of a dying breed of people and this selfish world needs to do whatever it takes to show some appreciation for the ones that are left! God bless you and your family.

Multimeter saved the day! (Must know where 2 connect it.) Next video what is the best one 2 buy , and do all connections in more detail.

What a nice guy dude may god bless you

They need more diy Mechanics in the world like you guy. You where honest with your customer and didn't try to go in his pockets for a pretty much simple job, andddd... tried to help him retrieve his vehicle back to him even though you had to pick up groceries. (Mannn it just doesn't get any better than that! ) just got my subscription and im im support YOU by purchasing some of merch!

Love the work with the test light, just diagnosed a a Ferrari V12 1982, with just a test light...operational with a jumper cable so I am Close !

I wish I could send my car to you you could fix it in a second but these guys charged me for 3 parts and labour and couldn’t fix it

Ya 700$ for my ford probe to still have no fire not happy

I'm haveing this issue with my 1990 crown vic I can't figure out why it won't start it cranks just like this one

Great video

Hey,I have a 1998 Tacoma 2.4L, it cranks, but only runs on starting fluid. Before this started, it would take several seconds of cranking to start. Zero fuel pressure, and I assumed it was the fuelpump, I dropped the tank and found a slit on the hose connecting the fuelpump to the assembly. At first I thought that was the problem, but it still doesn't start, and I now think the slit was causing the hard starts. I only have 12V at the fuelpump connector, when I try to start the car, and it doesn't prime, when I stop cranking it. Connected back up I don't hear the fuelpump, and it still won't start. I was going to run power to the pump next. Any suggestions?

I would have loved to have ended this with your "I'm not such a bad guy after all lingo"
Yet, there remains the issue of the paperclip!