MBR and GPT demonstration on Windows

Thank a lot 😊👍

⅝llĺ

Thank you

I have 2 tb hdd what i have to choose mbr or gpt , gpt selected defaultly

My disk external 2 tb this head ACH starts when I was played vlc movie file directly from the external drive , and ones a sudden vlc hang up accursed , error appears saying
" Format the drive
Format. Cansel
I tab cancel
Since then the disk eating my brain , and wasting my money on buying cables, Inclosure , pcb card etc , but damned unallocated space won't go .
I m not asking a solution ok ,it can be very complicated for you to telling me, instead
I have an idea , but required your assistance ,
Idea is ( because of the offline disk problem )my disk 1 initialize option greyed out but when I changed the pcb port card from a new one ,in computer management initialize option is now available ,but this is just for teasing me, that because ones clicking it choices mbr gpt again , it seems if I buy 2 tb hard disk internal then through sata cable defining this sec 2 tb as a slave disk and after connected the external drive first run Aiomy software to restore data in to the 2 tb slave and then do the testing ?
All my very important stuff is inside of that hack thing ,we trust on them then it was there responsibility to create technology good very good or at least address is on the back of those external hard drives box that you should buy another to back up your files just in case the loss of your data , there isn't any advices ! I wonder we all are playing each other life's

Valuable guidance, Thank you so much for the video and best wishes.

i have old laptop with wind10 but cannot load windows with error winload.exe , then i try to put in other pc using external hd then it showing not initialized disk. to MBR or GPT ,if i initialize it maybe my data will lose. i dont want tolose it how to repair it without losing data

Thank you!!

Hardware:
HP Proliant ML380e Gen8
Four Drive bays

Requirement:
Upgrade storage
Four 4TB disks were installed and configured for RAID 10 which gives 7TB storage

Problem:
While I could use Diskpart to convert GPT partition once I refresh the disk configuration installation it goes back to MBR.
Pointless installing Windows OS is hardware can't see above 2TB.
UEFI may not be supported although specs of hardware claims it can support GPT.
Searches did not help.

Solution:
Does anyone have similar problem/resolution would like to share. (Unfortunately can't show screenshots here)

thank you sir.. it's help me a lot

thank you

can i increase c drive with any software in gpt?

If I select the MBR, will it delete the data on my external drive ? Please me anyone????

THIS IS HELPING ME NOW 6 YEARS LATER. THANKS

You are the best

Dear sir
When I click initialize it's showing fatel error ......
Kindly guide me sir ......

It looks like the producer of this whole page has gone to do other business. Either way, I just wanted to show how I am grateful for this amazing work. Helps me a lot in my self studies, and even if it's 6 years old, it still works with today's tech. Much appreciated.

Data error (cyclic redundancy check).
when initializing (tried both options)

my hdd shows in Disc management, when i check properties mbr and guid are not there and it says not applicable when i try to anitialize all i get is a messige saying access denied. Please help me. I have tried so many things but cant get it to work. Its a 1tb hdd and theres nothing on it so i dont care about a fomating method. HELP !!!!

VIEW
•
VIEW
•

I have a 4TB harddrive, I am installing vista, It will only install on the first 2TB, the rest of the harddrive partition space is showing as 1678.02GB unallocated under
disk management, when I right click on the 1678.02GB unallocated my only options are properties and help, new simple volume is grayed out, how can i make the 1678.02 unallocated space available?

Here is how its showing under disk management
Disk 0
Basic
3726.02GB
Online

c
2048.00GB NTFS
Health

1678.02GB
Unallocated

i cant initialize disk

My harddrive is 2TB Seagate . If i click first on MBR, what will happen to my data on the disk ? second, can i use my hard drive after initializing it , before converting into GPT ? Do i need to convert it into GPT ?

Thanks

if i click MBR, my files on my external hard drive are safe?

I/O device error

Sir fix raw probalam

if the 50.00 GB option is not visible what will be the issue sir

Thank you so much

This was.. quite possibly the most clearly explained, thorough, and clearly spoken video, handling even potential issues that one might encounter. I rarely comment on videos and rarely like videos, but you've absolutely earned it here. Thank you so much for the video and best wishes to you guys.

Awesome

Thanks a lot.....

not initialized disk i/o error

what to do if the initialize option is not highlighted when I right click it

I have a problem...  I recently wiped an old Windows 7 machine, and am now trying to re-image it with Windows 7 again so I can give it to a different user.   I have the OEM disk, and am trying to install it from the internal CD/DVD ROM using the legacy boot option.  But I keep getting "Windows cannot be installed to this disk.  The selected disk is of the GPT partition style."  So I back out, restart the PC, and go into the boot manager and select boot from internal CD/DVD ROM using UEFI boot instead.  It lets me proceed.  The Windows files start to copy and then expand, but then it just jumps to "Invalid partition table!"  I am stuck.  Please help.

you are the best!!

Hi, I have 2 partition in gpt format, disk 0 and disk 1. Then I convert disk 0 to mbr then clean & install windows 10 in disk 0. But I can't find disk 1 after install the windows. I can't find disk 1 in diskpart cmd. Please help to get back my file in disk 1. Thanks

Hi, I'm facing the same issue that my disk is Not Initialized/Unallocated , red downward arrow, my 1tb WD elements SE is showing 2048.00gb. Not able to initialize the disk. Did perform diskpart and clean. Im using Windows 7. The MBR and GPT window did popup but i select the default MBR. Please guide if you have any solution on this. Cheers!!!

Hello, In the Video above you have mentioned, while doing SAN=Online All. There happened a problem while doing it. A Power failure occurred and SAN was not online by the time OS was ready and it took local disk and booted the OS? My query is, anyway you will be mentioning in BIOS to boot from SAN rather than local disk. Then how did it happened? May be I'm wrong with my argument.

Data error (cyclic redundancy check).
when initializing (tried both options)

thanks for sharring

thx for your video

it can format my external hard drive

i cant click the initialize disk butoon. please help. :(

by default my option is GPT and my hard disk is only 1TB.. which one to choose?

When I am clicking on mbr... It keeps loading and after time it shows device is not ready.. What to do?

I'm using itfreetraining every step of the towards my MCSA certification. The video well put together.

Could you please help me? After Installing Windows 10 on my 5TB, I have now come to learn all of this and you've explained it brilliantly, but when I do the cmd command running off the USB drive, I change it to GPT, I see the partition is back to 5TB, click install, and it's back to exactly how it was before at 2TB! Is there something I am missing here? Thank you

it free training plz help im stuck here since 5 days, on windows setup i cant see the ocz revodrive 350, and when i load the drivers for it it freeze in the loading green bar

I am having an error : the request could not be performed because of an I/O device error PLEASE help me :(