170$ DIY Audi 3.0T Intake | Custom 4" Intake for the B8 S4 & C7 A6

What if i have stock throttle base, what silicon would i need …. fully stock just got it today.

The intake filter you included in the Amazon list has been sold out for quite some time, but I see you put a different filter on there is that for the 3.0t ?

Unfortunately the vibrant vacuum fitting didn't fit in the hose, the diameter on hose is bigger and the fitting fit loose, I might have a bigger hose that yours..I'll see if I can get an adapter or a bigger vacuum fitting.

Do I need to tune my car in order to do this will it run bad without a stage 1. I have an Audi c7 a6

I bought the afe dry filter, but it doesn't have the stacker or the coupler to attach the filter, where could I get these parts?

Is the size of the filter important? The bigger the filter the more performance and gains?
I ordered the afe and the blox racing to compare them , they shoul be pretty close in performance right?

Would the parts list work for a 2016 facelift a6 3.0T?

So i ended up installing a CTS 3.5 intake but while trying to disconnect the secondary air fuel hose under the box i ended up disconnecting the whole thing. I thought this wasnt a big deal so after installing everything else, i started up the car & ended up getting a P0638 code, TPMS light, Max 950 rpm caution, and stability failure. Im thinking it has something to do with the Secondary air fuel hose i disconnected. Was super happy now im bummed out. :(

Can you tell me an opinion on these open filters/oil filters. Cons and pros I heard they are not so great actually

Honestly, you do the best reviews out there. Keep them coming, well done sir!

Dose the SAI breather filter just screw on ?

I put this in my 2015 A6 C7 yesterday and seems like there is a lot more airflow. Definitely more responsive as advertised and the whine is nice. Does anybody notice that the whole air intake including the stainless steel becomes quite hot to touch after running? After a 20 minute drive mine is almost (not quite) too hot to touch. No other issues.

Is the factory intake tube 4 inches?

Hey the vacuum seal isn’t available on your list, do you know how many mm it is? There are others available on Amazon just not sure on what size to order. Great video tho

what size do i need to buy if i have the stock throttle body

is the velocity stack all one piece or there a piece of silicone around keeping it attached to the pipe?

Was thinking about getting this setup. Any luck on a support yet?

Purchased the parts today along with the SAI filter. Did you ever find a bracket or heat shield part?

I can't find the 4" BLOX kit anywhere, it's saying its currently unavailable.

The link doesn't work. Also, how do I go about this for my '17 sq5? I came back to the video to look but I can't find it.

Did you ever get to finish the S4 install? This one looks amazing and sounds bananas

Ive got a question: I have a 2013 A6 with the b8 supercharged engine and currently im running a custom exhaust setup with no tune and want to get a cold air intake for the engine, do you know if i would need a tune to run the intake plus exhaust or if any damage would occur to the engine if i decided to not get a tune?

I have a c7.5 (2017) A6 3.0T CREC and this setup worked AMAZING on my car. Thank you for the invaluable content - especially when it comes to the CREC motors. There is very little information out there. FYI looks like BLOX racing got more of the 7''' filters in stock as I ordered a week ago and got it in about 4 days.

curious if this would fit on my 2018 Q7 3.0T?

Now need to make custom heat shield, im just not gonna pay 300 for piece of bented metal..

Did you or someone ever figure out the pipe for the S4/S5?

Your tiny URL for parts list is failing for me. But the Amazon shop thingy worked fine. Much appreciated, Cameron.
Is the OEM TB 3" or 3.5"?

question. i just bought an a7 and it has an almost identical intake installed, there is a tube below where the actual filter is, which is attached to my secondary air injection pump, sense that hose is not connected to the intake in any way i’m pretty sure that’s what’s throwing my engine code for bank 1 and 2 for my secondary air injection pump, has anyone else had this issue running an intake similar to this

would i be able to do this to my 2013 audi a8 3.0 v6 tfsi?

Does it fit the same in a 2013 a8 3.0t?

Do all the clamps come with the part you ordered

What do i need to know if I want to do this for a b8 (not .5, if it matters) 3.0t?

I just ordered parts to build this intake for a b8.5 S4, I plan on designing some sort of mount to support the intake once I’ve got it built. If you’re still looking for a solution for this let me know and I’ll tell you what I came up with once it’s done.

Have you done the install on the b8.5 I don’t see anything in the comments or description. I’d like to do this custom setup on my b8.5 s4

Did you do the b8.5 yet to see what different parts were needed?

Did anyone ever work out which parts are needed to be different if any for a b8.5 or b8 s4?

I know this was 9 months ago, but hopefully you see this. If i install this, do i need to do any reflashing or tuning of the ECU to update the air:fuel mixture? I've been wanting to put an intake for a while but i'm really hesitant to do so because I'm not sure exactly what steps to take so I don't mess up the car lol. Awesome videos BTW they are all extremely useful.

partslist isnt working

Why didn’t you mention the APR intake ? Released maybe 3 years prior to 034 and flows just as good I’m pretty sure.

Just installed this in my 2013 S4 last week had to get the 5" filter since the 7" was out of stock. I was shocked at how quick and east it was to install. I used a 7/32 bit and brute force for the barb in the coupler and none of the hose clamps that came with the intake were large enough, however my local Walmart had ones that did. Last intake I installed was on a r53 mini and it took a while I had this one 90% done during my smoke break at work. The sound is so satisfying and kicks in so low that I don't need to worry about mpg loss.

Dude awesome video! Thank you, any idea if it would Work for a Q7 14’ 3.0t?

Hey. This is super helpful. I have a C6 that I’m looking to tune. The engine bay looks similar. Do you think I’d need to modify much to make this fit?

I'm looking to make one for a b8.5 s5

Hello I know you put the link for the parts below but did you order the filter kit from Amazon or directly from blox bc I keep getting 3,5 in velocity stack

I'm a Audi owner. I just subscribed ❤️

Can I get my Audi a6 to start with the airbag blown? Why won't it kick over! 😭

Hi there,

I ordered everything on the list and everything but the pcv fitting seem to work.

The fitting looks to be a 3/16" but my vacuum line looks to be 1/2".

It is easily twice as big as this fitting

Can it be installed in A7. Didn't see the video fully yet.

have you tried the K&N filter for our cars? how is it?

Does this work with the stock airbox if we wanted to?