Connect Mixer To Audio Interface For Recording: Step by Step Tutorial

Thanks!

Cool, you have the same behringer u-control I have! I like that. Peace & Blessings.

Hi really enjoyed you posts on mixing. I like karaoke and have a mixer Studiomaster club 16+ I have tracts saved on my laptop and import them to pcdj software and mix vocals and sound tracks with this I have tried to record video karaoke using my android phone however quality is not what I thought it would be I looked at the Focasrite interface however I dont see how I can merge the video with the sound tracks any ideas please I'm new to this so it's all a learning curve once done I would like to post to my channel on utube😮 kind regards Dave.

I watched two other tutorials featuring men and they bored me so much, THANK YOU for doing these!! Yeah the girls

What is meant by balanced?

Will it record each channel separately

Hi
How r you
I have usb mixer ..
I am thinking to buy Interface.
Is it big Different recording?
Thank you
I have yamaha 12

Thank you so much for all of your tutorials 🙏. I have an audio mixer Q802 and an interface for Focusrite Solo (3rd generation) and am facing some noise issues in both cases if I use a single audio cable TRS to TRS or TS to TS. Could you please advise me on how to connect an unbalanced interface to an unbalanced mixer.

Gracias por esta explicación muy sencilla a pesar de no hablar inglés, lo pude entender muy fácil, Dios te bendiga.

Hi there, may I ask you a question? Do you know why when I doing a livestream, all my audience only can hear one side (left side) of the headphone sound? By the way , I am using iRig pro dua I/o interface to connect to my iPad , and my condenser microphone is connected to the iRig pro interface with the XLR CABLE.. please help. Thanks in advance.

So stupid and useless tutorial! I wonder how most of the people can appreciate that...

I need a basic audio interface which accepts two inputs (stereo) from two different PCs so I can use 1 set of speakers for both PCs, any suggestions?

Can I connect the audio interface through the aux than the main output for recording and livestream ?

Do you have any video that is even more basic than this one? For example, what is "line level"? What are "balanced and unbalanced" cables?

My scarlet interface is plugged into the master unbalanced master, Both RCA jacks. TRS and XLR going into interface. Is that acceptable?

Thank you so much

THANK YOU THANK YOU YHANK YOU. I purchased XLR TO XLR to connect my new mixer to my interface and I could tell that the signal was not right. I was trying to find a video that someone actually talked about TRS vs XLR when connecting the mixer to AI and Finally!!! So I have to purchase some new cables now. XLR to TRS balanced!

I have a disturbing question. I hope you can help. I have a passive audio mixer that has main outputs and direct outputs. I want to use the direct outputs
to connect to Behringer umc404hd interface. 4 direct outputs to 4 interface inputs. Then i want to use the mixer main outputs to connect passive speakers to a power amp. IS THIS POSSIBLE? Or will i fry my computer? Hope I hear from you. By the way, you share a lot of great info. Thank you.
Art

question: for practice reasons is it possible to monitor the audio produced by the pc itself without actually recording it?

I don't understand how do you use virtual amp simulators in this setup because they need to process clean instrument signal. My idea was to connect instrument to audio interface and then to connect output of an audio interface to the line input of a mixer. Can this work?

So is this how I get 5 vocalist at once on separate tracks?

Hi, I'm new to the audio world and learning for my current job. Thank you for the content, it is very interesting.

What bookshelf speakers is she using?

Do you have to use two independent TRS/TS cables, or do you have to use the cable with two TS/TRS' on both side?

Do i connect it with 6.5 TO 6.5 tra or ts?:( pls help:((

please i need to know . how i know if this balanced or not ? and what will happen if i connect somthing balanced with somthing unbalanced ?

Girl I'm smart as a whip but it can be overwhelming figure this sht out..second vid now👍

Hello there 👋 I’ve been looking to ran into a channel like yours Great content!!

I have a question: I have connected everything, but now I have a problem with some “static” sound coming out of the speakers. I don't know how to fix it and it's kind of annoying. Do you know what can I do?
Thank you so much!

hello im trying to do something very specific. i would like to plug my audiobox96 interface to my mixer. and from my mixer id like to put both my subwoofer, speaker and mic. i already got the speaker, sub and mic all working but when i put the interface in, i get no sound from FL studio. id like to play the mic out loud with my pro mic so i can do live shows.

Hi I just installed the chordie app v12.6 no sound ? I have keystation88 M-Audio usb connection?

I watched it again. Thanks again.

but how we can record mono it will be record stereo i think

For super entry level recording... what is cheaper a digital audio mixer with usb or a mixer and audio interface together?

Are there usb mixers that are able to let you monitor your first track while you record the second track seperately? The bleed over is my concern. I want to monitor the music while I record my voice with no mixing of the two. Mahalo from Hawaii!

Great video!

Question: Can i connect the output of mixer to the rear line input of the interface? (Just incase the inputs in front are occupied) Thank you

Great video. Thanks :)

well and clearly explained only what should you do if your audio interface only has a mic/line 1 input and inst 2 (for instruments) e.g. the u-phoria umc 22 then it is not possible to do left and right when i use a orchestra wants to record with all their equipment at the mixer (without usb) with audio interface is there a solution for that?

Hi, Can you help please? I'm using a Behringer XENYX 802, (mains - not USB) into a Behringer U-PHORIA UMC202HD Pre-amp. The Pre-amp has "Line" and "INST" settings, plus a "PAD" button, but I have 2 anomalies compared to your instructions on choosing settings. In order to get a good volume, I need to have "PAD" switched on, (i.e. pushed in,) but when I select "Line," the volume is significantly less than choosing "INST." But irrespective of what setting I choose, when I plug my guitar into either the "MIC" or "LINE IN 3/4" sockets on the XENYX 802, I get a delay - i.e. latency, when recording into "Audacity.". Can you advise what you feel I may be doing wrong, please? Thanks, in anticipation. Alan

Great tutorial just 1 question. If condenser mic is plugged into the mixer with phantom power turned on , do we keep phantom power turned off on the audio interface?

May I ask what is that ugly red little thing and why do you use that?

👍🏾

I'm confused since I have been taught to always record vocals in mono. And I see you are recording in stereo. Please educate me as to why vocals are being recorded in stereo and not mono. Thank you

Great contents as usual, thank you! I have a question: I have two keyboards and a mic connected to the audio interface, the output of which goes to the Ipad via lightining socket. In the IPad I use AUM for mixing the three signals and add virtual effects. My question is, where should I connect the iPhone to record a video/audio, ensuring the audio captured is the same I'm making in the iPad/AUM? Thank you!

Hi, just want some advice. I have a Yamaha MG102 c mixer which I am wanting to plug my Tanglewood Blackbird semi accoustc into to record on my laptop. Which audio interface would you recommend? I am on a budget but don't want to compromise to much on quality. Thanks in advance.

Respect to you .from india

Thanks 🙏