Комментарии:
Is 30 days enough time to let the concret cure before staining it?
ОтветитьLove the finish and colours used in the original pour - what were they? I'm hooked on your channel! cheers from the UK
ОтветитьHow much PSI for power wash? How much for those two jobs? Thanks
ОтветитьAre all surfaces slippery after applying the sealant? Or just the stamped surfaces?
ОтветитьThanks for the video
ОтветитьThank you for another great video! There are rust spots appearing on my paver patio. It’s 2 months old and plastic furniture was the only thing on it. Is it minerals in water? What’s best way to remove the rust? What’s the best sealer for pavers. Polymetric sand has been applied. Planning to seal after rust is removed. Can be “wet or dry” look. Thank you!!!!
ОтветитьIf there is some moisture left in the concrete while sealing will it eventually evaporate through a water based sealer? My concrete wasn’t 100% dry when I sealed and it looks a little blotchy
ОтветитьWhat type exactly sealer did you used? I just saw another video but that guy was rolling the sealer (Behr) and that’s a lot of work for me and the patio is big so a sprayer is wayyyy better and faster!!! Thx!!
ОтветитьThis is a great video. I just bought a house with a similar looking patio as the second one in this video. There is a thin crack that runs through the middle. Do I need to address/repair this first?
ОтветитьI wonder if using a power broom with the stripper would work well
ОтветитьJesus at least narrate what you’re doing in the video.
ОтветитьWish you guys were in SLC - we can't get our concrete guys to finish our project :( You definitely come off as loving the craft!
ОтветитьHi can you tell what you used for the sealer? I have a newly poured concrete walkway pad and would like to preserve it. Also is there any way I can color the concrete after the pour? It came out lighter that we were expecting and would like the look to be darker. Any recommendations? Thanks
ОтветитьWhat sealer product did you use? link?
ОтветитьNeed your help I’m about to do concrete sealer, but I see some residue from the previous sealer. What should I use to completely take the last layer off?
ОтветитьThe first patio you did had several stains…. The walkway had a ton or wand marks. Why did you not get those out before sealing.
ОтветитьThat first layer was very sparsely applied and didnt have even coverage. You'd have been better off buying a better quality hand held sprayer that sprays evenly. Or a low pressure pump assembly would work great too.
ОтветитьWhy dont you tape off the house and all the other stuff your spraying with the sealer.. that’s no bueno
ОтветитьWhat brand sealer did you use ???
Ответитьdoes sealer prevent mildew/mold in shady areas?
ОтветитьHow many gallons of product does it typically take for a driveway and perhaps walk way as well? I know that’s a loaded question without dimensions, however just a standard driveway, 2 car fit.
ОтветитьHave u tried CLR for mineral deposits?
ОтветитьDid you install the artificial turf? The concrete and the turf both look good.
ОтветитьCan a sealant prevent lichen from rooting into concrete?
ОтветитьGuys, you are too much! This is called ART!
ОтветитьI had a party 2 days after concrete was poured . I make fries in oil. And spilled some hot oil on fresh concrete . Will those stains come off ?
ОтветитьThanks man. You answered my questions.
ОтветитьI have used sealer before and one question, sealer is not like liquid so my pump didn’t spray well it was sticky, any idea why?
ОтветитьWhat kind of sealer did you use I just poured a color and stamp slab and am looking around to find the right sealer
I’m aiming for a semi gloss look if you have any suggestions thanks.
Subscribed just because you managed to have Layla for your intro. Very informative and great work as well.
Ответитьwhat sealer did you use on non slip granial! Great video
ОтветитьDoes the sealant not overspray onto the house or that expensive turf? The original sealer that was applied right after pouring stained my dads brand new siding. I feel like a barrier of sorts is needed if you spray.
ОтветитьI’m about to reseal my stamped driveway using an oil based sealer, can I use the plastic deck sprayer?
ОтветитьCan I paint the concrete and then apply the sealer?
ОтветитьThoroughly done nice. Please let us know what sealer you used. And where you can get it.
ОтветитьHow much did you charge for this kind of job ?
ОтветитьRandom question but we have a gunite pool slide that has a stained finish. It’s losing it’s slippery coating. Contractor said they use a concrete/rock sealer on it. do you think I’d have to strip all old coating to keep it super smooth or could I just add a new shiny layer on top.
ОтветитьEnjoyed your video. How long after new concrete has been laid down do you need to wait to apply the sealant? Thank you🙂
Ответитьgreat job guys! I know this is an older video but any idea on the color you used for this job? was it stained after poured or mix in? thanks.
ОтветитьCan someonw help me with my probleme!!!!
Just did a concrete driveway with a buch of acorn stain ( black spot) that dosent go off with just the pressure washer so I put a 3% sh solution bamm everything was gone
Perfect driveway !!!
A few days later the guy put a scealer on the concrete and now when the concrete is wet all the black spot that were gone reappear
Someone got an explication off what could cause that ???
Did the sealer reacted with the SH or i dont know
Imo i killed all the organic on the concrete how could they reapear after applying a scealer...???
What do you think about a concrete contractor that only seals concrete if the homeowner asks for it? Is sealer just a bonus or is the guy kinda lazy?
ОтветитьI got a question, why not use surface cleaner? I seen in the front where the steps were there were hard “etch” marks. Just curious
ОтветитьWhen you have a lot of build up of sealer on existing concrete whats the best way to strip it, if its a large area?
Ответитьstarting my own business doing this thank you
ОтветитьDoes concrete sealer hold up ok on driveways?
ОтветитьQuestion, I'm about to seal all of my exposed pami deck with Glaze n seal wet look laquer sealer. Can I use a roller to apply?
ОтветитьI was told by a sales rep for pavers that he uses “vinegar” ??? Any truth to that ?
ОтветитьSo after a real good surface clean on concrete walkway or driveway what do u recommend using to seal it so it doesn’t get dirty again or less dirty..
ОтветитьHey, thanks for vid. How long I need to wait before I stain new concrete. And also what do you recommend for dog kennel concrete sealer. Thanks
Ответитьwhat brand of glaze and sealer you use ?
Ответить