Комментарии:
Don't you think an NF-FXXX plate would be better ? There are plates with dummy batteries for that kind of battery and they are widely used with lighting and screens.
ОтветитьAny experiences with the GH5? Thanks!
ОтветитьNot sure why you need the 5v to 9v adapter cable..ive seen dslrs powered using a 5v 2A power brick as a smart phone would..im no electrician but ive seen it work..
Ответитьquality info ....looking forward to getting a setup like this soon!
ОтветитьThis is just awesome as I have a G85 and when I shot with my cage at the races I shoot it seems I running out of battery at the wrong times. So I'm going to get this setup and rig it to my cage so I can shoot all day that would be awesome and even for traveling too. Thanks
ОтветитьFrom 2000 likes of this video, camera manufacturers should /must understand the need of the user of bigger battery vs the compactness.
ОтветитьThank you
ОтветитьWhere’s the links?
Ответитьthank's .. nice video..
Ответитьactually the powercore 10000 has a max output of 2.4 amps. the powercore 13000 has a max output of 3 amps out of each usb port
ОтветитьHello. Does the Duracell 10050 mAh Power Bank work with the FZ2500?
Ответитьlove this, can it be adapted to run a Nikon sb800 flash?
Ответить🙌🙌🙌
ОтветитьHello sir, the USB 5 to 9v converter's manufacturer says that it can only provide a current up to 800mAh, so it says it's not suitable for "deviced requiring high power"... Did you had any underpower issues with your camera, some Canon users say their touch screen wasn't working or something...
ОтветитьDoes this work with GH5 s
ОтветитьCan use in 60d canon?thank u
ОтветитьSo putting a 9v output into a 7.2v input didn't mess with anything?
ОтветитьAre these safe in the long run?
ОтветитьWith the sacrifice of a mic of course. Any ideas about that?
ОтветитьHave you tried shooting in bulb with it. I tried a dummy battery with a RAVPower power bank.... Work in most settings except BULB..... And that the one time I need it. This is only with the Eos R..... Works fine with 5D.4
ОтветитьAs an electrical engineer I do not recommend this method here is why! Your battery says it outputs 7.2v and obviously has also a certain allowable ripple of voltage that is designed for the camera. On the other hand you are feeding you camera with 9 volts with absolutely no way to know if the voltage ripple might or not damage your camera and I am not even counting the fact that 9 volts means more current for your camera and your camera might not be able to handle the overcurrent.
ОтветитьGH5/s does not support usb charging unfortunately.
ОтветитьAwesome video!
ОтветитьThere are kits on Amazon that up-convert the voltage from 5V to 7.5V. For my EOS-M I use one of those. People complain that they do not work but there is a trick to understand. The USB Battery Absolutely MUST put out 3 or more amps. This is the most confusing part so go to a local electronics store and ask if you are not sure. You need 3 AMPS out of a single USB A port. Sometimes they quote 4.8 amps but that is for two ports.
The other way around is order the kits with 2 USB cable ends. Then a battery that says 4.8 amps.
Experience with GH5S?
ОтветитьHow can I achieve this with a LUMX LX100 and Anker PowerCore+ 26800 PD with 30W
ОтветитьUnless you have a step up transformer this will not work. Most cameras run at 7.5 v. Sub it 5v.
Ответитьgood job
ОтветитьSuper trick 👌👌
ОтветитьHow bout a vmount. Slightly more complex but 10+ hours easily.
Ответитьon the a7iii you can just go powerbank into usb c connector. if the camera is off it'll charge the normal camera battery as well
ОтветитьYou my friend got yourself another subscriber. Thank you so much!!!
Ответитьalso just a tip for every one using this hack there's a accessory splitter you can buy if you use a light, mic, ect. and you need to hook them up to your camera just google- Micnova Tripartite Video Accessories Mount - you can have your battery mounted and light and mic or other accessories with no problem! Im going to be using this hack and splitter with my Canon EoS M50
ОтветитьWhat equipment do i need to do this with the canon eos m50?
ОтветитьI just carry extra batters.
ОтветитьThe Tutorial looks great, but we need an updated list of parts as a couple of the connecters are no longer available and it's hard to tell if there is a 1 to 1 alternative.
ОтветитьTop, vou fazer isso na minha tambem
ОтветитьI sooo needed to see this!
ОтветитьGood video. It is interesting that you use a 5V to 9V adapter, I would have thought a 5V to 7.4V would be more suitable. What do you think?
ОтветитьI'm about to do this exact thing for my SL2... Hope it works out the same!!
ОтветитьAct
ОтветитьHey can i use any dummy battery connected to my anker powercore essensial powerbank for my a6400 camera? I don't wanna fry it.
ОтветитьQuality of your video, explanation, tips, links, basically everything about this is so soothing to watch. Super helpful.
ОтветитьWhat battery bank would you recommend for a Canon M50 mkii? Been looking everywhere and am still not sure which one would work best and not blow out my camera. TIA!
ОтветитьThank you!!
ОтветитьHi! Do you think, I can charge my Sony FX3 ? Or, just use usb c connection ?
Ответитьcan you this method for a Sony A74 Camera? thanks
Ответить♥️♥️♥️
Ответитьi need it .. but its insanely costly in my country .. want to make using old battery..
Ответить