This Siphon Works But not for Long

he used a bicycle tire air pump to load the pressure

using hydrostatic pressure you'll need a wider inlet narrowing to the outlet and smallest head hight possible and think about adding back pressure so com plete system needs to be air tight too, also pond shape, depth of intake, water hardness and more are factors.

Gringo con..tienes que llenar los sifones de agua poniendo de contado cundo bombeas el y agua..y luego enderezar

You donot know the difference Asian guys from you. Total amount of water is insufficient in your case. As also other perseon pointed, the glue needs outlet part of the punp to keep higher pressure..

So did you make it air tight? Your shit just falling apart by shaking it.

an interesting PVC pipe pump is the one that you pump presure inside the vacuum , that makes more sence.

Hi , did you get the contraption working aventially ? to be honest , i think you must turn it sideways and make sure everyting , even the vacuum is filled with water .

I have also watched the original video, but it seems to be a scam. A ram pump should have two check valves, which are not visible, and despite the lack of water pressure, the discharge pressure appears to be high. In my opinion, the original video appears to be a deceptive scheme aiming to secure advertising revenue by hiding the battery and pump, operating the valve knob as a switch, and deceiving viewers, taking advantage of a large audience.

how many hour does it work

I think it's not work because you use same size input and output pipe. I think input pipe need to be bigger than the output pipe.

See my comment there once it posts... Your design flaws made it not work.

Thanks for telling true words

The entire intake pipe (until the first ‘vacuum chamber’) diameter should be larger (maybe double the size) of the output diameter. It works. Try again. The ‘vacuum/ pressure chambers’ should be larger.

Вам удалось доказать нам что вы глупый человек! Это технология 16 века но вам не понять как это работает!

His pressure tanks were double the size of yours I bet that has something to do with it

Forget all the long winded theory and endless calculations water does not flow uphill.
This device just stores the mechanical shaking into air pressure in the centre cylinder which pushes out the water in the bottom of the device.
The foot valve prevent water being pushed out of the inlet.

okay i got one for you,,,there's a product on the market its called a V - Pump.

Okay its stated this plastic gadget is submersible,how it works?

You attach a hose to it as its primed from a hose pipe,,i think the design and manufacture is,,Australian,,its noted that with hose water priming the aparatouse and the aparatouse then placed into a pool it will pump at very high velocity,,

Okay i haven't purchased this unit as its a unit to global market from Australia so i don't quite know whom has the franchise and thus what markets its directed at in order to to obtain one,,.

Now some people say it works but i am not convinced,the science behind the aparatouse that works the the VENTURA,,assuming water gravitationally fed pump system,,its used for a variety of applications emptying out ponds, etc

When reading about this aparatouse i was on the research path to try and fined an aparatouse that fully functions primed from water and of course then pumping the same water and in some way attain lift, i wanted to at least gain a lift of 5 meters plus get as much flow capacity as possible where i could control the flow but attain up river as the object was to in some way defy gravitational force so i could work up stream as well as down plus on a level keel attain an all around flow,,im looking for a product to achieve this given i flour gold prospect so its essential to have a system flowing either direction 24/7 if i chose to,

Further i wanted to obsoleate a fuel type system,and such as Electric,,or
Battery operated bilg pump systems and go out totally Eco,,well that's what its all about being Eco friendly with nature its a plus for me
I operate a variety of sluices but unfortunately bilg pumps are a necessity but csn be a pain carrying battery's every where at present to run my sluices and highbankers the bilg pump is 12V not a big impact but saves carrying pails of water the battery can be hevey going,

I came up with an idea that if the V - Pump operated from a hose to prime this Ventura concept all i needed was a pressurised primer to the V - Pump from a bilg pump and the rest is history,

I haven't tried this yet as i don't own a V - Pump they say they are about $20 + but i think its possible to prime the V - Pump from a 12V Bilg Pump if so and of course should this work it would mean that the aparatouse would possibly work this way be light robust and possibly could keep the pressure and flow rate i need going on a continuous loop along with the required lift,,
Lift is very important when working against gravity but if it worked i could function on the level and going down or up stream, it would allow me to choose the locations and working spot without restriction,

It would allow me to physically use the water i am using i am priming into the feed as if it where from a hose,,yet it would be coming from the source i am working in,

The only difference would be i would have advantage in using Creeks,Streams,Rivers and even the sea water at those locations and on the same token being totally Eco friendly to nature as i sluice and pan for the flour gold shiney,
Us part time prospectors in our hobby interest have to find a way to keep everything balanced and inside the laws of mother nature without upsetting the EcovSystem thus totally reducing carbon footprint,,
Its important in law not to use if possible a mechanical device,, where such mechanical devices deprive the right to prospect as a hobbist.

Gravity is the obsticle i thought further could this apparatus further make a good dredge for dredging those nooks and craneys in the rock crevices and pockets,,well here is a fantastic opportunity for you to see wether this aparatouse stacks up to its innovative structure,

The Pump is called the
V -Pump its an orange hand gun type aparatouse that connects to a hose pipe ie the hose primed from tap water being the primer fuel that sets of this device when submerged in water.

Will it Pass or Fail awaiting your test results.

the guy turn his pump sideways pumping (filling it with water) then stood it upright. did it 2-3 times. each time it worked. lol

Too many air leaks in yours

to pump water up you need at least to bring the equivalent of gravitational energy... of course, you can initially put some energy in the system like pressurize gaz or whaterver but once it is used. the flow stops... no need to debunk as i ve never see one working... but...well..trying by yourself is fine...but ..physicists have done that long ago..

not busted until you illuminate the leaks of air in your system.

Glue your joints, how can it work if it is sucking air on the joints.

All this busted was your credibility as a 'buster'. You didn't explain how it actually was supposed to work so I am assuming you don't really understand it. One of the videos I watched DID have the one-way valve at the bottom...perhaps you weren't watching closely enough? Ther are several parameters that might need to be changed slightly that are critical to it, but you didn't mention them either...etc.

Nonsense as this is why it's very important to learn some basic physics and logic.

Thx for experimental video. Moscow watching!

if you don’t understand that you need a one-way valve at the bottom of the input, you are clueless. You should take this video off-line, cause you don’t understand the concept, nor did you engineer it correctly. Maybe it is due to lack of instruction in the other video, but you don’t even keep the input underwater during the manual filling. Then your pipe shoots out of the socket, which means you didn’t use any glue, making the system not air tight, which is another requirement for it to function well. I doubt whether you glued the pressure chamber either. It is YOU who is BUSTED!!

If you didn't use PVC glue the joints will leak air. I think it needs to be air tight to make and maintain pressure.🤔

thanks

THANKS!

It will only work if the outlet lower than the upstream water level.

nothing was glued and not sealed

100% accurate for me, thanks for the schematic diagram on how it's done.

It's working.

This belongs on the 1/2 Ass experiment channel...

I posted a water air compressor on you tube it's just a drawing but if you find it you can build it I've given a description I 100percent sure it will work I haven't tested it yet have fun
Live life if I could send you a video directly I would keep up the good work check out zm bombas water pumps if you haven't already you will love it

The disign of this isn't calculated properly. As others have stated, this utilizes the siphon principle. Having a ram pump in that thing would be cool.

Thank you very much

THANK YOU~~~~~~~~~

what is the original video? what are we comparing the debunking video to?

worst ram pump I have ever seen ...

You have to turn the whole system sideways look at the video again and see how when he tries to pump it back and forth in the water upright the water doesn't really come out you got to clean it to the side and then pump it in and out of the water once the water starts flowing big time you tilt to back up and set it down then it'll work with a lot of pressure

No glue, air escapes and you loose pressure. You need to glue those sockets.

It is never going to work. It violates the rules of physics. because the outlet are above the top of the water there is no potential energy. The valve on the bottom and the motion build up mechanical/kinetic energy for a bit but eventually that dissipates. Perpetual motion machines do not work.

Thank you

Maybe you weren't holding your mouth right!😋

For some reason your pipe are not proper seal or air tights which those pipe lose pressure. Knowing using references. I just see it lose. Those people using proper sealing the pipes. If those are fake it hard to believe in how those other era work in pipes. For example water foundation.

😅😅🤣😂

Yeah that design for a siphon wouldn't work all that well if at all. There's way to much space for air to get trapped which as the water pressure slacked off the air would fill and break the vacuum.

Not to mention the outlet is at the same height as the inlet riser. Plus the joints look slip fit which if they're not air tight will suck air and break vacuum. Then there's all the 90° changes of direction, as each time water has to switch directions like that it slows down in a odd manner that it (water) gets in its own way.

45° turns are better to keep high flow path. Plus you don't need 'pressure chambers' because to build any pressure would fight the lack of water pressure even with a check valve. A siphon system works best by gravity in conjunction with water tension. The higher the fall of water down the siphon the greater the strength to pull water to fill the vacated space of the water leaving the system.

It clearly works, it's just not how everyone expected. The reason that this type of vacuum pump is being showed to everyone by those "scammers" is because of development. Who knows... Maybe someone will have an idea on how to improve and make use of this type of pump.