Комментарии:
Thanks fam I replaced. My screen 💪🏾👑
ОтветитьWill this give you the Not genuine parts error and disable functions?
ОтветитьJust replaced the screen on my daughter's iPhone. Thank you! All works as it should.
ОтветитьWhy remove the front sensor assembly only to re install it in the next step? I don't understand
Ответитьnot gonna say it but i botched it. the phone still works its just..... botched.
Ответитьthanks very much this video helped me
Ответитьgot one torx screw off the bottom, the other one stripped. so frustrating. had to tap the torx screwdriver into screw head to imprint deeper torx imprint into screw, def can't reuse this screw... 🤷♀
ОтветитьWe’re do you get your screens
Ответить😢😢 why my iPhone can't turn on
ОтветитьThanks for helping
ОтветитьThis worked flawlessly - Thanks for this video!
ОтветитьThank you very much, it as help me out
ОтветитьDon't you have to reprogram the screen to retain true tone?
Ответитьi cant seem to get the screen off with the suction cup and i heated it up too but it still didnt come off what should i do?
ОтветитьDoesn't work and nothing happens on the screen
ОтветитьDoes the Face ID still work after the replacement?
ОтветитьWhat about True Tone?
ОтветитьThat’s way too much. I would rather pay to have this done or just upgrade to a newer phone.
ОтветитьIs the display programmed in ur fix kit is seen that if u don’t True Tone doesn’t work
Ответитьthanks again ifixit
Ответитьwhat’s the easiest/hardest iphone models to repaie
ОтветитьDo you guys offer any full assembly screen? My screen is cracked along with the speaker being completely dead.
ОтветитьGood tutorial.
Ответить❤
Ответитьtops video
Ответитьwhy did he take the microphone and sensor off then on without doing anything???
ОтветитьSweet
ОтветитьGlad someone knows how to do this cuz I’m sure not going to. Too high a risk of serious damage to phone to save a fairly small amount of money. Interesting video.
ОтветитьThank you!
ОтветитьCan this work on any phone
ОтветитьWhere’s the front camera ?
ОтветитьI'll pass
ОтветитьHi I was replacing my screen. And I accidentally broke the ambient light sensor. I turned it on, everything is fine but now the back of my phone starts to get hot. Any ideas on how I can fix this? Thank you
Ответитьit worked great!! but i am experiencing a color difference everything is not as bright like green is dulled a little
ОтветитьI'd rather pay $100 than go through these exhausting, rigorous processes!😢
ОтветитьThanks helped a lot!!!
ОтветитьI was just WOND3RIng if y’ALLs scReen looks like minEs tWo and shi…?😢broken heart 💔💘💘
ОтветитьWell, I didnt realized this blue plastic on the new screen until i was putting the screen back and saw a little plastic coming out of the side (with the new seal). I couldnt open it back up because the top and sides were already glued. I just pushed the little blue tab in and closed it up. Is that bad??
ОтветитьWhy do i need to change the microphone and All of the stufs up there ??
ОтветитьSo my screw are stripped what can I do?
ОтветитьAmazing guide, the most difficult was actually to set correctly the timer of my microwave for the iOpener
Ответитьis it mendatory to remove the sensor or can i just swap the display ?
ОтветитьWorked!
ОтветитьI tried to unscrew the screws but I tightened to tight the last time. What is a trick to get the screw out?
Ответитьi only took a few parts off (the last thing I took off was the battery cable) and put all the parts back on but my Iphone won't start
ОтветитьThe way you talk doesn't require background music,
ОтветитьCan’t get the screws out the logic board??!!
ОтветитьThank you for posting this. Saved us a lot of money. Followed the video step by step, and it went smooth the whole way. I didn't have the double suction cups so had to use two individual cups and used a hair dryer to heat the adhesive.
Ответить