Arduino Sim800L GPS Tracker | Arduino GSM GPS tracker

Hello, you have used base 5 for the output base of the project in the image, but in the program you have taken 12 outputs and the image is wrong, please correct it.

sim800l already has gps right?

sir how to register 5 simcard number in this scope

Not working

Hello sir, what is the minimum and maximum voltage of the neo 6 gps module?

Dear sir, If i used atmega328p pl, share the circuit diagram

Dear Sir how I design this project with out using arduino uno, because I wanted this project very compact

hello ..code not doing action. please help

how much money you was spend

which phone number we have to add in code? personal or sim which inserted in sim800l module? please reply...

Sir now 2G sim is not available in market which sim we can use in sim 800l in this project

4G sim card work or Not in SIM 800L
and which sim use in SIM800L module
Plz Reply.................

Hello! i'm doing a project that needs to acumulate miles, can i calculate the distance using coordinates (lat and long)?

But this is not with firebase

I am facing a problem that the code does not reply back to the mobile besides that it works fine please help I have checked both gps and GSM module both are working fine,. When I send message get location to the tracker the message appears on the serial monitor after it does nothing no reply back

Please help, when I send sms the sms is sending but the sms is not coming back again

in serial monitor i am not getting any command ,its stay blank only,i have check all thing twins thing is printing on serial monitor .when i upload sim 800 other program its works with AT commands please reply waiting for solution.and one more thing where to connect anti theft wire in bike

hlo sir is it possible power both arduino and gsm by 3.7V.2500mah battery?
which step up converter will i have to use?
thanks

Hello i have a problem
Your code dont send any massage to me
What's happened!?

Neoway m590 use ker saktay hain

Sir why its not sending me the location but in serial its already send the message

Me puedes decir que tan bien trabaja ese módulo convertidor?

Hello sir, I'm trying to do a project very similar to this one but easier. All I want is to ask for the location information via message and the device sends the location information to me. What kind of changes do I need to make in the part of the code you have uploaded to Github? If you could help, you will make people like me happy.

add a phone number register, it's better sir

I like your project. hope you will add capacitive touch sensor which is attach inside the helmet. if the rider will not wear the helmet the engine will not start.

Sar gsm not automatic sms delete
Send me ansar

Not working for me :( I tested gsm module and gps module, everything is ok but I dont receiving any sms
I am from Serbia (+381) is it any relation with ANCII coding?

HI Im not getting a response from the module AT commands working as it should any help

Can we use same code for airtel Sim card
Or different Sim cards needs different codes

Hi Sir, I am doing a similar project. Could I have your email so I could ask you a few questions about this? Thanks

Dear Master, this project is very informative and interesting. Is it possible for you to change the source of the program so that several phones can be registered? I tried to do this with include EEPROM but unfortunately failed to change the program. Thank you in advance

V in injection 12v resistance 100k and résistance 1M to Gnd calculé v out 10v to A5 ??????Arduino utilisé 5v

Tanhk. arduino nanao can be used Arduino uno

Dear your project is very good and interesting, I congratulate you for it. A query could add another 2 or 3 more telephone numbers and how would it be done? Thank you

and i know i am interfering with you
My question is simply the lm2569 used by Kapoor and connected with it a rechargeable battery so that the fuel fuels it with the tire and in case of the interruption of feeding the battery enters is this useful
Or I will connect a diode between the model and the battery so that it doesn't happen coming back from the battery

everything works perfectly except that it shows me an error on serial monitor when sending GPS coordinates, please help me

@Ahmad Logs Thank you very much for sharing your projects, could you help me please to run this project on MIT app also connect google map on MIT
Regards,

Sir,
Can this also be used with Wemos D1 Mini ?

Sir, by using what you are powering the buck 360 convertor?

How are you my friend When using the atmega328 . microcontroller Alone on the printed board with gsm sim800l is it possible to use one feed for them which is 4.2v although the atmega needs 5 volts, but when connected to the 4.2 it worked

Hola , el valor de las resistencias son 1k para el transistor , 10 k y 1M par la ignicion porque la foto segun los colores son otros valores

Is it useful to use a relay instead of a transistor and if it works which one is better, you genius thank you

Do you have an idea on how to send gps coordinates to firebase with this project?

Good project, but where do I get 12 volts continuous from the bike when running or trying to run

Very cool program But you mentioned in another program that the gsm memory accommodates 70 messages. Did you add in this program the code to erase the message, brother? Because it is really amazing

Assalam o Alaikum great video can you please make this on micro python too with esp8266 or raspberry pi pico
thank you in advance

hello sir i wanna do it this project but i want to send sms to the number registred in sim card not in the code how can i do it .thank you