Комментарии:
Some of the units use Tone control + Straight + Power
ОтветитьThank you!
ОтветитьAbsolutely perfect thank you for this very helpful video, worked for me.
ОтветитьAbsolutely legend! Thank you!
ОтветитьGracias por el procedimiento.
Al primer intento revivió mi equipo.
Gracias nuevamente.
Good thanks for info i do my receiver working again but . The error mesg show that time is DSP Margin
ОтветитьBrilliant. Following thunder storm couldn't switch rx-a1070 on. Following guidance all sorted. 10/10. Many thanks.
ОтветитьThank you so much.
서비스센터 갔더니 main ic chip이 고장이라고 수리비용 $250를 요구.
이 영상을 보고 직접 해결.
대단히 감사합니다.
worked for me thanks
👍
I tried your procedure and it didn't work. Tried it again. Still no luck. Tried is a THIRD time and it appears to have FIXED my receiver. Thought I'd post this so that others may be encouraged to try your procedure a couple times if it doesn't work the first time. Thank you very much!
ОтветитьFixed my receiver after power surge/ outage resulted in unit not turning on. Strangely TV and DVD player were unaffected by this.
Many thanks for the video.
Yesturday at the party it turned off and whenever i tried to turn it on the power light just flickered. After using this trick i can hear the click again but nothing on the display. Weird.
ОтветитьWorks! Amazing, i was about to throw it to the garbage....
ОтветитьIt has worked very well for me.
Thank you.
Thank you, your solution worked 100%
ОтветитьOmg thank you so much for this info. You saved me a lot of worry there. It is working now!! But like you said i probably need to get the AVR fixed for permanent fix
Ответитьthanks u sir ! tu as sauvé mes fêtes de fin d'année !!!! merci merci❤❤❤❤❤❤
ОтветитьI got a Yamaha stereo htr 5835 and it's not coming on at all
ОтветитьIt worked! after a thunderstorm my rxv 479 unit wasn't turning on, just blinking the red light. I did the trick and now it's working again. Thank you very much!
Ответитьthank you! just saved my life!
ОтветитьRX-V475 worked!! even in the manual dont say this trick. Great explanation👍
ОтветитьThank you so much i had that problem the receiver turned off automatically and then refused to turn on, i just removed the fuse from inside, reset the device using your tips, and magic happened,many thanks.
ОтветитьDamn! It works like a charm! Thought it was ruined.
ОтветитьThank you.. u save my av receiver.. ☺️☺️☺️🙏🏽🙏🏽🙏🏽
ОтветитьYou saved my life, thanks 👍
ОтветитьWow! That worked great. My A2040 powered right up. Thank you so much 👍
ОтветитьThanks mate, fantastic news as my apparently dead RX-V671 is working as usual again
ОтветитьDidn't work. I used Tone and the straight button not info. Luckily i had a 100W lamp in series, there was a short in power module STK 433-330. Speaker terminals were damaged, may have caused the module to fail but i don't think so. I think it was abused later or damaged in the post. If your unit shuts straight down again it could be a similar short circuit somewhere, rectifier, one amp module, a bad smoothing cap after the main board rectifier, a bad V regulator etc. Check for power from the standby transformer. Possibly around 12V and then gets regulated to around 3V to the main processor. If processor is getting power then a reset should do something, fix the fault and try again.
ОтветитьWe have a Yamaha ns-p270 hooked up to our TV and although we love the sound quality, we have to keep getting up to turn the dial to adjust the sound. I haven't been able to figure out why the volume buttons on the remote do not work. Any suggestions? Thanks!
ОтветитьI have no straight button or tone control or info button rx-v630
Ответить🙏 Thank
ОтветитьWorked! Thank you so much! 🙂
ОтветитьThanks. It really helped me to reset my yemaha which was not switching on....❤
ОтветитьThanks to you 🌹🌹
ОтветитьIt fixed my AV amp - GREAT - thank you so much!!!!!
ОтветитьPlease, I have RX-V6A. When I select, like source, USB or Blu ray, or other sources, after a few of seconds, automatically the Yamaha selects the bluetooth source. I tried, on the menu, to disactive the bluetooth but..nothing! Help me, please. Excuse me for my bad english but I'm italian.
ОтветитьThank you so much, I fixed my Yamaha AV receiver RX-V373 by following your tricks.
ОтветитьThank you very much. I am able to fix it by your method. Local support is hopeless. Once again thank you and keep up the good work.
ОтветитьAwesome this trick works with me Thanks a lot
ОтветитьMany thanks, this thing worked on my Yamaha RX-V483.
ОтветитьThank you so much, I was looking for how to fix this problem.
Following a power outage, I was no longer able to turn on my receiver, even though it was plugged into a power surge protector.
According to the owner's manual, if when turning on the receiver, the standby light flashes a few times, you should contact the nearest service center and request a repair.
So I consulted (TricksTipsFix), and he had the solution. What address should I send my check to? Thanks again.
I set button as shown you indicator is start but instunt goan .what can I do ?
ОтветитьThankyou so much dear 😅😅
ОтветитьThank u so much sir.....
ОтветитьNot working
Yamaha AV Receiver HTR 2064
Thanks man , your a lofe saver
ОтветитьHi,my avr rx 585 is automatically changing the programme when it turns on.i tried the trick u explained it's showing no protect what does it mean.
Ответить🎉 It’s very helpful for me. Thank you for that solution. ❤❤❤
Ответитьvery useful😊😊😊. thank you for this video, i play music as loud as i can😂
Ответить