Комментарии:
Thank you! I coldn't have done it without you! very helpful!
ОтветитьMine isn't extruding anything when I push in.
ОтветитьThanks I just got this printer and couldn’t find any videos on it. This answered literally all my questions and more! Thank you so much❤
ОтветитьHow would you compare the 2S to your other printers?
ОтветитьThank you so much for this video. I was scratching my head for longer than I'm proud of trying to figure out why my print nozzle was pressed so hard against the print bed. Turns out I had accidentally installed the switch on all the way down. It took a bit of finagling to get all my levels right because I swear every time I touched one wheel, the rest were immediately off, and my center was never the same as the corners for some reason. But, without your video I never would have gotten it. So, thank you!
ОтветитьI am a machinist....and I bought one of these also.
Very happy with purchase
I have been haven trouble with mine trying to do the test print I load the print it heats up and then nothing happens. Any ideas
ОтветитьWhen I insert my SD card it says no files come up
ОтветитьThanks for part 1 & 2 of this video series as i just got myself this printer. Previously i had only used the Elegoo mars 2 pro resin printer so this process was entirely new to me. Although it took me a good 2-3 hours to put it together its now printing the test buddha at 12% with no apparent issues.
Thanks again for making these!
Hmmm, I can't get the buddah print to work, I tried changing some heat settings but it never does that line on the side or any homing
ОтветитьExcellent video. I am currently printing the test Buddha and your video helped me a lot getting this thing going 🙂
ОтветитьMANY thanks for this video and your helpful commentary. I watched it minute by minute, pausing along the way to dial my own leveling issues with this printer model. My first print is successfully underway. Thanks again!
ОтветитьSold me on it. Neptune 2s inbound. ETA 3 days. Thanks Mocha.
ОтветитьVery good video instruction. So detailed and helpful. Thank you
Ответитьhello I have a problem when I print the buraah the device does not want to move and I have a z logo at 66,000 with you it and has 0 comments solve this problem thank you
ОтветитьThank you so much for this video! It helped out a lot with setting up my Neptune 2s for the 1st time!
Ответитьidk if mine is defective. Barely any filament comes out when I do the extrusion test
ОтветитьThanks for this, I have a Neptune X and this information works for that too. Currently printing the buddha.
ОтветитьTest Buddha is printing just now.
It took me like 5 hours to set up "y" axis belt was factory twisted, y axis pulley adjustment and all the eccentric adjustment of pulley slides were tricky for me. Your videos helped a lot.
thanks!!!!
Ottimo! 👍🏻👍🏻👍🏻
ОтветитьParabéns... 👏🏻👏🏻👏🏻 Muito bom os seus vídeos.
ОтветитьThanks for the walk though, helped get my one built and printing.
ОтветитьThanks for the amazing content you're sharing,
Just got mine yesterday and no matter what I do I'm not able to make point 5 at the same level with all of 4 points just need it to go download 0.6 mm maybe
Thank you for the walk through! Your videos helped me get my Neptune 2S set up today and my test Buddha is running now!
Ответитьhi, thanks for video. I have a questions, about this printer 3D Elegoo Neptune 2S versus Creality Ender 3v2? Which is best printer?
Ответитьim changing my settings on the machine before every print. how do i use the settings created in cura, so i dont have to manually change it on the touch screen. Another thing is what speed are you printing at, because out of the box its at 100% and man it resonated like crazy.
ОтветитьThanks for doing this video helped me assemble mine
ОтветитьI currently own a Monoprice Mini V1 for 5+ years stock (no modifications or any repairs), have been printing spool after spool of filament for years, now its time for a bigger build volume. After seeing lots of hit and miss reviews on amazon, and now seeing your video I went ahead and ordered mine. It seems that a most complaints/issues are assembly related I really enjoyed the calmness you have during assembly this is VERY important at any skill level people have to be calm and relaxed while assembling any hardware to achieve good results. I have to say out of all reviews online yours feels more engineer level and not the "Sponsored" type. Great Honest Review! Greetings from Aruba.
ОтветитьJust ordered one of these printers and this video looks like it will be extremely useful for when it arrives. Really appreciate the clear and detailed instructions. Keep up the good work.
ОтветитьCan you tell me how loud is that printer ?
I'm thinking about to buy one for myself, but i want to place it in bedroom.
Extremely helpful video with very beneficial commentary. Thanks for making high quality content specifically for the Neptune 2S!
Ответитьgood work keep it up
ОтветитьGreat review, thinking about gettin this one but i do have some question, the boweden tube looks like the capricorn one, is that him ? Keep it up on this videos!
Ответить