Комментарии:
Ciszko wchodzi bieg 1i wsteczny, linki Ok są pytanko czy to lewarek ?
ОтветитьJak wymienic lewarek zmiany biegow . Czy jest może film
ОтветитьThanks great video
ОтветитьA jak zdemontować prowadnic szyby
ОтветитьCiszko chodzą boczne dzwi co poprawidz
ОтветитьThank you for video, i have to do it as well in my van 🤝
ОтветитьGrat video - does that help in the door being slightly misaligned? Mine (Renault Master Mk3) is about 5mm lower than it should be!
ОтветитьExcellent video just the job nice and easy to follow perfect.👍
ОтветитьToo video
ОтветитьJust about to do this repair on a Fiat Scudo. Thanks for the guide.
Often the reason the roller wears out is from greasing the track. It may appear to make it slide easier, but the grease also attracts abrasive grime which ultimately causes the roller to seize up. Then it wears a flat spot, the rubber wears through and the steel wheel starts cutting a groove in the track. This is the mistake I made!
I'd suggest that the best thing to do is to simply always clean and dry the track when washing the vehicle. If the track is clean but the rollers are stiffening up, I've seen it suggested that a small squirt of silicon spray directly on the roller bearing will help, but also to wipe off any excess silicon immediately. Try not to leave anything left on the track surface and outside of the roller to which grit and grime sticks.
Thanks a lot for that. Good job. I now know what to do, Cheers
ОтветитьIl fallait changer le rail aussi pour bien faire...
ОтветитьGreat video thank you, I need to do mine.
ОтветитьWow what an excellent video, perfect explanation! Thank you so much!
ОтветитьThank you
ОтветитьI have a 2014 Renault Master with sliding door on left side as in Australia. Can you provide correct part number or where I can obtain part?
Ответитьhi I have problem with leaking sliding door on 2014 Renault master ... I have changed rubber seal and have adjusted top hanger + door catch .. but still leaks from top back of door... would changing the roller guide lift the door for a better seal ??? thanks for any info
ОтветитьGracias por tu video.
ОтветитьGreat video, very helpful 👍
ОтветитьThank you so much!!
ОтветитьGreat video...mine needs doing so i assumed it meant removing whole door..great
Ответитьhi my master mk3 sliding door is out a little to far at the top and needs to go in a bit. how would i fix this what bolds?
ОтветитьIs it possible to just replace the roller? Because it’s uncommon to have driver side (UK right hand drive) sliding door, so the ‘rip-off’ e-bay seller wants £25 for the hinge and £50 for postage. But you can buy top, middle and bottom hinge for the passenger side for £25 free postage.
ОтветитьThanks that helped me, can I ask what make roof rack is that?
ОтветитьTankes
ОтветитьThanks so much!!! Would you say there was a difference in function after sanding the rail??
Ответить