Комментарии:
I hope this guy one day makes a servo
ОтветитьSo Doc Brown from Back to the Future got reincarnated.
He's existed as long as time.
He's here to show us the way.
This is how all of the greatest scientists started their revolutionary careers. Get some university backing on this my dude if you’re not already doing this for a doctorate.
ОтветитьThis dude is Dr. Stone IRL.
Ответитьamazing work ! you need to do a startup !
ОтветитьFake
ОтветитьSo I gotta ask - with all the carbon being added, along with the energy required to run it, will the fuel generated from the plastic be enough to cover the cost of the energy+carbon?
ОтветитьJulian, I love your work. I have been playing around with Pyrolysis for about 10 years now, but unfortunately, I haven't had the time or money to take it to the level you have. I have envisioned something like your Mark 4.5 for years but never got around to it. Bravo. It would nice to discuss a number of things with you, but I'm afraid typing here would be too much. For now, may I just ask if you could provide a link to where you got your shredder?
ОтветитьIf you've got a patent, do you sell the plans for this machine?
ОтветитьPure genius
ОтветитьThis is ingenious. A plastics plant I used to work for as a process technician WASTED TONS of ground plastics monthly snd took it staright to dumps because we could not reprocess it for parts. Every plastics plant in America operstes this way and writes off this waste as a loss. Polycarbonate, polypropylene, nylon, polubeutyline, all this regrind was waste. There are several plastics plants in Evansville Indiana alone that produce tons of regrind as plastic waste. We were always told as technicians that there was nothing to do with the tons and tons of plastic regrind. (Company name here) Produced at least 3-6 TONS of ground plastic waste per day (in three 8 hour shifts). And this regrind was either bought for pennies on the dollar or taken to landfills.
ОтветитьThay already have this on a large scale ...it's called syngas only thay use a plasma electric ark to vaperize the garbage , plastics bio metal everthing ....this guy is using microwaves to try to vaperize...but it's still genius level and if he is successful might be able to use this in small towns because it can also be used to generate electricity, hopfully it uses less energy then it produces...plus it's small !!
Ответитьyou are a genius.
ОтветитьI'm planning on doing a pyrolysis plant that will be powered by incineration of municipal waste, the heat generated from the incinerator plus syngas will run the pyrosis and distillation plant.
I'll then I'll use the resultant Diesel to run my diesel generators to produce power which will be used in my interlocking bricks making machines for affordable housing.
Much love from Nairobi Kenya 🇰🇪
Dude how do I contact you. I know people and money!!! I want to develop this technology. I’ll give it another year…. I keep trying to reach out so to not monetize your invention but people need this for plastic more than Iinventors need their credit
ОтветитьHow do u make one
ОтветитьThis got me thinking of trying to build one myself but instead use an fresnel lens to heat it up
ОтветитьI WANT TO MAKE ONE
ОтветитьThe world should be funding this, absolutely awesome.
ОтветитьThe government is gonna unalive this kid just like the guy who had his truck running on water.
Ответитьi am far removed from chemistry to know how it works, but what you have created is admirable. i hope you get some real funding to explore this technology to the max.
ОтветитьGreat job professor
ОтветитьI've spent most of my professional career as a chemical engineer researching alternative fuels and plastic pyrolysis. Would love to talk and see if there's anything I can do to help. You're doing awesome work!
ОтветитьSomething not right! If nobody funding you be careful they might wanna silence you soon. How the whole world not talking about this
ОтветитьNext time you some radioisotope do that shit
ОтветитьJust asking. Does that beauty emanes bad radiations???
ОтветитьUse the carbon next to make carbon fiber or forged carbon!
Ответитьbased on what I just watched, it is
1. Grinding the plastics
2. Add catalyst, the powder carbon
3. Prepare the tank by vacuuming the oxygen, feed the plastics.
4. Feed the inert gases and start microwaving.
5. Make the solid into gases and make em condense into a liquid. By product I guess.
The only by product I can see here are the powder charcoals from previous reactions. Now we need to identify the ratio for say a Liter of refined oil
Anyone with basic knowledge of chemistry would know this isn't possible.
ОтветитьWow... I studied Industrial chemistry. It's perfect.
ОтветитьTry to put a fractional distillation when you scale it up
Ответитьnow this a is a proper colored person right here. im very proud of him
ОтветитьThe question is how much power does it us to make fuel. If the input is less than the output it will never be profitable unless he uses renewable power.
ОтветитьLol senku mentioned turning plastic to gasoline are dr stone hahah
Ответить162k subscribers yes sir 🙌 👏 good job
Ответить20 yaers in chemistry. Never used a yoga ball before 😂. Be safe.
ОтветитьHow much energy does it take to make a gallon. Is it more or less than the potential energy from the fuel. This is my only critique.
ОтветитьIf it was this simple, there would be a shortage of plastic. I was warned by a family friend to stop burning plastic (he made plastic) he mentioned the dangerous byproducts. He died at 45 of cancer. Be sure you know what is going on, not think actually know.
ОтветитьIf this suits real you'll get a mobel prize for this shit
ОтветитьThis process is highly dangerous, and produces highly carcinogenic chemicals as byproducts i worry for your and your neighborhoods safety naturejab.
ОтветитьThe gasses emitted by pyrolysis can be ran through a cat cell to produce carbon and/or water vapor. Which you can reuse for other purposes.
You can also use a scrubber system or afterburner. It’ll reduce the overall emissions of your device significantly.
You can refine the liquid oil as diesel, and use it for a generator.
The solid char you’re left with is great for soil, filters, low grade fuel/additive, and for composite plastics.
You’re going to end up killing yourself if you don’t fix those welds brother. You already lost about half your foot from shit welds failing. You’re an actual liability to your neighborhood.
ОтветитьHe needs to stop burning plastic and start working on how to remove all the carcinogens. He’s been polluting our backyards for years now, someone needs to call the EPA
ОтветитьCouldn't you just burn plastic to heat the plastic instead of using microwaves? Once its going, use the gas to heat the plastic so you can burn less plastic. Then you don't have to mix carbon and take up volume in the chamber allowing you to pyrolyze more plastic. I mean if you're going to burn the liquid and gas fuel anyway, why not cut out the middle man? I bet you would save quite a bit on that electricity.
ОтветитьBut I like this series
ОтветитьYou need to be studied.
Ответить“Trust the process” -Gustavo Fring
Ответитьthe yoga ball lol! making gas with a yoga ball ! genius
Ответитьlooks like his foot is ok
Ответить