Комментарии:
Who else came here from ElectroBOOM?
ОтветитьAloha!
ОтветитьHow u do the hole on the bowl?
ОтветитьVery good info, why sphere is used, to avoid from corona dischage
ОтветитьIs the wire contacting the bottom roller connected to the grounded part under the cutting board? Sorry, I didn't quite understood that part
ОтветитьWhat are the dimensions for the nylon castor bed and ABS pipe used in the video?
ОтветитьYes, I am building this contraption. I have the two Ikea bowls. I also purchased a smaller bowl to use as a base for the two Ikea bowls. Just seemed like a better way to dismantle it for storage. finding a bed roller was not easy. (I dislike making online purchase) But found one at Ace Hardware. The De-soldering braid was not easy to find as well. For a motor, I am using a power drill. (I do not have any motors on hand.) I did glue a single layer of panty hose to the bed roller. I now just need to install the pantyhose belt and then it will be time for a test run.
ОтветитьIt would have been nice to show how the panty hose is turned into a belt.
ОтветитьGreetings; one thing that you did not cover in your video is the upper roller. You only state that it is a PVC pipe. Does that roller have an axel or is the pipe just lying in the bowl?
ОтветитьHello, how can I recognize nylon from normal plastic, or do you mean by nylon just normal plastic? Thanks Honza
ОтветитьDoes the top bowl have to be circular, easier to find ones with flat
ОтветитьKok nyetrum? Di taman pintar kok gak nyetrum
Ответитьwhere can i get a sphere like that ??
ОтветитьHey,I wantto ask you about the supply we need to connect to ven Do graph Generator. HIgh potential.
ОтветитьMaaaaaaan. I love you 3000000000000000
ОтветитьCould I hypothetically cut a hole in the top and fill the sphere with something that I wanted to statically charge?
Ответитьi'm wondering how carbon fiber brushes would perform in comparison to copper
ОтветитьThis is negative Van de Graaff generator.
ОтветитьElectroboom
ОтветитьWow old video but I have a question. Why do you need to need to cut a hole in the bottom of the bowl? The brush on the smaller bowl was on the inside but the majority of the charge was on the bigger bowls which didn’t have any holes. Couldn’t you just tape the brush onto the surface of the larger bowls?
ОтветитьCan a tesla coil be powered by this?
ОтветитьHi. Tnx for the nice video. What is the charge of the ikea dome with this setup: positive or negative ? What materials to use to get a positive dome ?
ОтветитьWoww....💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖💖
ОтветитьElectroboom: oof SH&T!!
DIY Tryin : Whats up Mehdi Sadaghdar
Electroboom: How do you know my name?
DIY Tryin : I saw your video. Why you raged so much?
Electroboom : yeah my arcs are like still small and also it TOOK ME A WHOLE WEEK TO PUT THIS TOGETHER!
DIY Tryin : continue
Electroboom : Now its much stronger :3
Blocky .YT announcer : and thats the story of how Electroboom meets DIY Tryin.
Thank you and goodnight.
storied by: Blocky .YT
What if the brushes are not copper?
ОтветитьGood job….
ОтветитьLots of little details not shown well. You could build this from this video but you are going to have to do some trial and error to get it right. Specifically. How does he attach the bottom brush and then to the ground? Not shown. How did he attach the soldering brush and where? Not shown. Yes those who know will see this as obvious...but what about those who don't?
ОтветитьYou are a demon in electroboom video
ОтветитьCan we use Teflon for this belt
ОтветитьHello can you please give me the list of the components
ОтветитьI really need to build one for a project as soon as possible please get in contact with me
ОтветитьIf you go near it with a fluorescent light it will illuminate just from being in the vicinity.
ОтветитьI’m looking for something to raise the hair on top of head not shock. What does that?
ОтветитьIs it dangerous
ОтветитьI'LL JUST WAIT FOR A WINDY DRY DAY WHERE THE HUMIDITY IS LESS THAN 10% AND TAKE MY NEW TENNIS SHOES AND WALK ACROSS MY NEW CARPET
ОтветитьHow much charge should we provide to the pantyhose, and how high can the generator increase the charge?
ОтветитьDoes anyone know whether the dome is positively charge or negatively charge?
Ответитьwhos here from ElectroBoom??
ОтветитьFrom electroboom
ОтветитьTotally frickin awesome in its simplicity, low parts cost, and super-duper high voltage output!!! :-)
ОтветитьElectroBOOM!
ОтветитьElectroBoom squad!
ОтветитьLIKE & SUBSCRIBE
ОтветитьAwesome, Thanks for your time & talent.
Ответитьi love you man, i hope they still have these bowls
Ответитьi whanted to bufd one for so long thanks
ОтветитьWhat is that belt made up of
I mean what did u used as a static electricity generator?