Комментарии:
What happens if you connect the input next to the power connector?
Ответитьis there any 4 pin to 3 pin? argb
ОтветитьHey man, old video so I hope I get a reply.
I recently bought the Coolmoon Diamond Ray strip and saw that I needed the RGB Controller to actually use it instead of just plugging it into my mobo.
If I rewire my LED strip to have the 3 pin mobo header as described by your wiring diagram, will it work?
this thing is stuck on one color. I measured the board no damage... im totally puzzled
ОтветитьIs it possible to solder the ARGN 3pin connector or the JST 2pin connector to a USB type A? Since they both have the same pinouts and use the same amount of voltage. I wonder if you could control the ARGB that way by through software by hooking it up with a USB type A into motherboards that don't have an ARGB header.
ОтветитьThank you
ОтветитьWhat LED strip is compatible with this? I normally use 5050 RGB but they are 4 pin... thanks
ОтветитьI have 3 fans and a Coolmoon RGB controller as well as a remote to control the colour of the fans. However, the remote doesnt seem to work, cant alter fan speed, colour, animations etc. Any help?
Ответитьdude you fucking rock I've blown up One controller and I've got one left this helps out a whole lot
ОтветитьWaste of money dont buy this garbage
ОтветитьBuddy your a life saver 🙏 tysm 😃
ОтветитьHi! I bought new one today, however after few minutes, the remote controller stopped to work. I mean, it has the red led when I push a button, however, I makes no reaction to the remote controller. Do you know what could be the reason?
ОтветитьMy case has ARGB fans and strips, and a IN VDG connector with 3 pins but with just two wires. I suppose I can wire my coolmoon controller, taking the DATA OUT from one fan or led strip from the controller to the VDG IN, but how? Thanks in advance for your help.
ОтветитьI want to convert this fans to a 3-4 pin connector to use the PWM of my motherboard and make them spin faster, the hub is really slow and i can't take it anymore
ОтветитьMany thanks for the info mate just what i needed for my controller from coolmoon . 8-)
ОтветитьCan you help me to pair RF coolmoon remote to coolmoon controller?
ОтветитьI become a cool Moon RGB Controller with 3 Pin and 4 pin.for 10€
ОтветитьI got a Coolmoon controller and tryed to use it whit some fans I had from a 3x RGB fan kit whit they're own... Non RGB basic controller... So I decided to use the fans with the Coolmoon fan and for my worst it didn't work
ОтветитьThank you. Can you please make a tutorial on the manual switch headers where we can attach a switch to toggle different states. Can we change brightness with that?
[update: I have attached a switch. It can be used to change the LED effects or turn it off. But, cannot control the fans without the IR remote]
i bought a hub coolmoon controller for my non-coolmoon fans they also have 6pin, but they didnt work, shall the fans also be coolmoon in order to work ?
ОтветитьThank you very much. I got 4 coolmoon fans and a new case. This case got a pwm rgb splitter/controller included. Now i have the problem that this new controller from the case dont synchronisize with the old ones from coolmoon because the coolmoon ones only have a 5V input for power. I will remove 3 pins and hope the fans dont die lol. Do you got any tips for me? I want to synchronisize it with my ASUS TUF B660M Plus. Greetings
ОтветитьIs it possible to plug an arbg cpu fan (just the arb part, the fan part plugs into the mobo) into the "light strip" part and it would work?
It has the same 1 blank 3 4 as the "light strip" ends
Awesome video! Blew my mind. Thank you.
I have an argb fan (3pin). How would I go about connecting it to the Coolmoon controller? I'd need a JST connector?
thank you, my controller is suck and dead, the LED on the fan now at maximum and so fricking bright, now i'm about to cut that 5v LED pin. I also wonder if we can mod a typical fan case with 3or4 pin to plug them into that hub (only using 2 pin only the left side: 12v+ground)?
ОтветитьThanks for this video dude! My case came with it's own rgb hub and led strip, but I had a separate for my fans that's exactly like coolmoon. My case led strip is only 3 pins, and I've tried plugging it to my fan hub, which accepts 4 pin for the led strip. Now it's broken. I bought another led strip but it's 3 pin again. Thankfully the strip is labelled now, so I was able to make it work even with the different connectors thanks to your explanation on the pins.
ОтветитьSir please help. How can i turn this rgb on, i have coolmoon as well. My lights are off i cant turn them back on because my remote controller is dead. Please help
Ответитьhello, I would like to disable completely the RGB of all fans when I turn on the Pc. Is it possible to do it on the molex connector or the red one connecting to the hub itself?
ОтветитьThank you for this info. I have this exact model controller and this answered every question I had explicitly.
ОтветитьThank I don't known before.
ОтветитьDo you think I can use this converter to connect a cooler master fan and control it through the coolmoon adapter?
ОтветитьMy remote suddenly stopped working for this controller. The lights are still on, but i can't change color or turn down the speed anymore. Yesterday evening everything was fine, i didn't change anything and now it doesn't react anymore. Does anyone know of a solution, im really bummed and i don't want these fans to spin at max RPM the whole time, its loud and annoying.
ОтветитьIs it possible to connect RBG fans on ARBG controller? to glow only in 1 color ?also controller is 6pin as fans
ОтветитьGreat video! Thanks! How can I get this controller to plug in to my motherboard (JRAINBOW1) or where can I find the controller that can allow for my 9x 6pin fans to be controlled by my software (razer synapse or msi mystic lights)?
ОтветитьGot a question hope you can help me, I got a bunch of TT Riing fans but the controllers that come with it are broken. Could I use this controller with these fans? (Looks like a 5 pin fan or I could be wrong)
Ответитьcan join 2 coolmoon cotrollers together and sync them
Ответитьhey there bro! i have the same hub and i have fans and two led strips plugged in to it. would it be possible to have different color between the fan and strips using my motherboard?
ОтветитьHey pal so i have a 5v argb plug coming off my EZdiy vertical gpu mount. Could i plug this straight into the led strip socket missing out the left pin as you shown in the middle picture?
ОтветитьI haave the cool moon with the 3 pin input connector, but have just aquired a asus strix h270f motherboard thats has a 4 pin header for rgb, is the a cable that connects the 4 pin rgb header ti the coolmoon 3 pin header, as i have thise exact fans and they claim to be aurora compatible
ОтветитьTried to plug in an Aerocool Mirage 12 fan but it didn't work, figured out the pinouts are different just like this: N-G-D-5v-G-12v (N is the data out pin which is unusable by the fan).
So what i did was to flip the connector and switch the 5v and 2nd G pins so it matched the ones in the controller. The Fan did spin and I managed to controll the speed but the lights didn't turned on at all. Do you think I messed the RGB the first time I plugged them incorrectly ? or is just a compatibility issue ?
почему не на японском языке? ничего же не понятно
Ответитьhello, any idea what are the pin layouts for the motherboard pins?
Ответитьso the 6 pin is not the pwm signal?
Ответитьcan you put 4 pin fans in the controller too or are the 4 pins only for the led strips?
ОтветитьIs this controller can save previous color after restarting PC?
Ответитьhey would there be anyway i can connect standard rgb strip lights to this controller
Ответитьthe negative is GND led and next is GND fan. sorry for my bad english.
ОтветитьHello,
I'm sorry if you have answered this before, but I can't find it anywhere. My pc came with a similar controller, but I can't control it through the motherboard. It is connected with a 3 pin connector and the aura sync software recognises it as a Adressable LED strip, but it doesnt change the color. I can only change it using the remote and it always resets to the rainbow effect every time I turn off the computer. Is there any way to disable the remote control?
thank you very much?
can i use it with a 4pin connection to my motherboard? because i have the MSI x470 gaming plus max but there is no 3 pin 5v
Ответить