OpenWRT - Install OpenWRT on the TP- Link TL-MR6400 4G LTE WiFi Router

MR6400 chạy Openwrt không ổn định. Mong bạn có clip hướng dẫn quay về Firmware gốc😢

Just follow your procedure unfortuantely within tftpf64 .... i never got a connection on the server while powering on the Router with the reset button pressed for at least 5 second. I also disabled the firewall just in case. any suggestion ?

Hi, just saw on OpenWrt device page that now Rev 4.0 and 5.0 are available ;P

mình muốn quay lại fw gốc bạn có bài hướng dẫn không? tks bạn nhé

can you lock LTE band? thanks.

is the imei still there? how to backup tbe original frimware and imei first to be safe

chào Van Tech Corner , bạn có thể làm 1 video khác về mr6400 cài openwrt bằng tiếng việt được không hướng dẫn từ lúc mới cắm sim 4g vào đến lúc có mạng được không ? nếu được mình xin cám ơn

help, my router has that led that lights up when you plug in the pc, but it lights up without plugging in the wire and when you try to connect to the phone, you can't get dhcp and some ports can't provide dhcp except for one port that works

plz help me howe back to tplink v4

can you help me to install open wrt on mr600v2 please

Hi, great article ! Thanks ! Do you know any other modem / router supporting openWRT (or openTPMTCProuter)? For example Netgear D7000 ? If they would support this I could dismiss the Raspberry Pi4B that I'm using now to run openTPMTCProuter for dual internet aggregation. Thanks

Bạn ơi mr200 thì cái thế nào vậy ?

Mạng này 4G nhưng quá yếu

Untuk model tplink mr200 boleh ka ?

please tplink MR100 with openwrt

Thank you to show how to configure the WAN port.
I wasn't looking for this but I needed it.

Unfortunately with the v5, the configuration for LTE module is a little more complicate.
Bye.

Thanks for that video. I've tried your everything but no luck.. Then resarched again and found on Windows10 you have to enable CTCP for working this flash. Otherwise it doesnt work. For anyone who has difficulties try to make sure that your CTCP is enabled. If its not find way to enable it!

Great, simple and to the point. Thanks!

Hello Van Tech Corner. I'm using TP Link TL-MR6400 4G LTE WiFi Router too, Sir. But
Firmware Version: 1.0.19 Build 181219 Rel.59200n

Hardware Version: MR6400 v2 00000000
I think it's little bit different with your video and my router. Can I install OpenWRT firmware on my router? Sir. Please.

can this be applied to tplink mr6400 v3?

it has a vpn server service this firmvare?

MR6400 V4 Support OpenWRT??

Is it mr6400 v.5 or 5.2 support openwrt? If yes, how to setup🙏

great video thanks... how to do this on dwr-m921... can u give some directions.

Did anyone try to install OpenWRT on TL-MR6400 V3?

I want to install openwrt on Huawei HG253s v2 router. but i dont know how to do it because i know only one Method 1: via OEM firmware
but the installation of Method 1 interface is not supported Huawei HG253s v2.
Method 2: Installation using the serial console
I can't find it on your channel A detailed explanation to explain this method. Method 2: Installation using the serial console

Bạn là người VN hả, bạn cho mình info để giúp mình up con MR6400 v4 được ko?

it's now support version 4 is that correct?

I have a V5 hardware that i think is supported today. But when i tftp it tp my tp_recovery.bin seems like it's not connecting to my Host computer.. already tried Windows and Ubuntu 20.04 host pc..

Windows not showing lan connected, Ubuntu not showing anything either (already check dmesg and settings).

Do i need to use a network switch to force the interface up?

Any benefits in doing this?

How to lock lte band on this router?

Nice bro....how if i use the firmware for B593 speedport. is it work?

Great! Thanks

hello sir..
im using tplink mr600 v2
can you make a tutorial how to config on mr600 v2?
done like & sub your channel
hope you can make more & more video about tplink modem router 4G lte for better experiance and exellent speed

📶✌😀📈

Tk for you tutorial Bat i have hardware v5 can help me?

How to set the installation on MR6400 V. 04 ???

Mình có 1 con router không tên tuổi, không có database ở OpenWRT, bạn cài được không ? Chip MT7621A có SDK để build.

Sir, can you show how to configure Wireguard VPN to the WAN LTE? How to manage that?

Hi. totolink LR1200 same like this. have simcard slot. i already flash openwrt on my Lr1200.i already enable wifi & Lan and can connect wifi to device.. But . no coverage. how i can do it?

i have tplink mr6400 v5 current firmware version is v5 i want to switch back v4 plz help me

Ho to use this options on V4 version? Can you help me?

Hello, I have two wireless cards. Can I connect to two networks on different networks?by vlan

ok Multiwan - failover
:)

Next video about dnssec and banip please or how better conection and optimize openwrt

Thanks for the informative and professional content!
A was lucky seeing the title - I am just about to build small network using LTE connection - than became a bit disappointed hearing it is just for V1 models. (I have V4 :/) I am eagerly waiting the stable version for the rest of versions of MR6400.

can i sent my router (d-link) for you install open wrt

Very nice special effects with the titles! Production quality is getting great.

next video please make a video to install docker on openwrt