Комментарии:
Does anyone have or know where to get a chart for XTool 10watt Cutter, that shows basic power and speed settings. I'm burning up a lot of material trying to find just the right settings. If you have one can you put a link so us beginners have a plase to start
ОтветитьJuast got my D1 20 watt. Question. Can I adjust the thickness of the etching or am I limited to the width of the laser. I would like my outline of an item to be a little thicker.
ОтветитьI want to do coffee tables - how do I find one with a frame large enough to cover a decent sized wooden coffee table?
ОтветитьI suggest you don't try selling anything with superheroes on it unless you want to be sued. 😉 Please don't think that because 4000 other Etsy shops are doing it that you're going to be lucky and not get caught. It's not worth losing everything you've worked so hard to build.
ОтветитьMske laser etching great again .
Ответить$2,000.00 .....
ОтветитьN you go over a second time for a deeper etch
ОтветитьYes nothinner down the drain
ОтветитьDoes anybody have this laser and also has a mopa 60w or similar? Is the price jump worth the mopa?
ОтветитьInstead of using paint thinner (which is chemically designed to thin oil based paints), you should be using acetone for spray paints where they are ether based. Plus, you wash off the waste into a plastic or metal container, not down your drain where it will pollute your water system (either town water or your water table if you have a leach field).
ОтветитьThis video is what I needed!!! Can't wait to try it out. Thank you so much for taking the time to showi us.
ОтветитьI am new to this product and found it exceptionally helpful. I've watched others re: set up of the new unit including the build and you are heads above the rest. You said it's a long video, I find it to be the most informative and I appreciate you covering all the bases.
ОтветитьThis guy is full of 💩. Honestly, first things falling out his mouth ... incorrect. I've worked with lasers the last 10 yrs and that might not make me expert, but I have a ton of experience working with and using fiber, CO2, and Diode lasers... and trust me folks there are major differences in type and quality in the marketplace.
ОтветитьMatt I also have a question about how to get my business started with the XTool laser. Any ideas? And how did you know that the hammer that you engraved would sell for about $40?
ОтветитьThank you thank you thank you Matt!!! I have been waiting for this video for two months since I receive my XTool D1 and F1. My software was part of the demo stage and they have definitely upgraded it. I greatly appreciate your video and now I feel more confident. Thank you very much.
ОтветитьUsing paint thinner in the kitchen sink? If you’re not single now, you may soon be!
ОтветитьI prefere the portable! : )
ОтветитьI bought a Xtool D1 and the download is always for the F1, and no wsy to change?
ОтветитьThank you for this video... I have the f1 and when I upload an image (trying to do a soundwave) it keeps asking for DPI and its a very smudgey result... do you have any recommendations?? Thank you!! Doing this on stainless steel bracelet.
Ответитьwhat images do you have to purchase to import for the xtool?
ОтветитьHow long will it take to write names or a few words on phone cases , adapters with this machine?
Ответитьand if i live in a rent appartment , it has quite sound or noisy ?
ОтветитьLove your video! Newbie question, how do you know which surface requires a coat of paint/lacquer before etching?
ОтветитьWhat a great tool
ОтветитьHow was the machine
ОтветитьMaybe I missed it but what wattage is this laser
ОтветитьNice vid. Why don't you have a honeycomb bed? Also, the Atomstack air assist works and is much cheaper. 😉
ОтветитьGreat video I’m thinking about buying one
ОтветитьWhy not laser on 100% and speed up? (instead of power 70% with 126mm/s) would this give the same result? I'm planning on buying a laser but very much dislike the waiting as I did with my 3D printing. So many hours. So, speed is key for me. Any advise?
ОтветитьNice one. Can this be used on aluminum business cards?
ОтветитьBased on the specs for the D1 the IKIER blows this away and has auto focus.
ОтветитьHow much
ОтветитьI hesitate to order the D1 or Sculpfun S30 pro max 20W
ОтветитьIs that clear coat laquer gloss or matt..?
ОтветитьWhat type of air filter are you using with your laser
ОтветитьWhat prepping did you have to do for wood portraits?
Ответитьbut does this machine also do cnc work, if a person is going to pay 1,600.00 for this machine it should also do cnc work too, that a lot of money for a small machine?
ОтветитьWould this do hard metal tho
ОтветитьIs Makeblock the same as Xtool?
ОтветитьDo you recommend air ventilation or if I use in garage, I should not be worried?
Do I need air assist also with this laser engraver? Thanks
tool expencive like the loger better. i probably never save enough i amm disabled dont have very much income, if i was lucky enough to buy something i more than likely get screwd
ОтветитьNo, no, no, this is wrong. $1,000.00+ for a low-powered diode laser????
Not trying to cause any trouble, but for that money, you can get a much stronger CO2 laser, with faster and deeper cuts.
For what it's capable of, it should not cost more than $500.
Thanks for the video, though, and I hope you enjoy it.
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre-establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
ОтветитьDoes anyone have the xtool D1 not the pro I can't get the website that I need to download it doesn't exist and no way to contact anyone I just wanted to know if anybody's having that problem I'm sitting on a laser engraver I can't use apparently the websites that I've come across are only for the pro
ОтветитьIs this the same company that makes the scan tools?
ОтветитьGreat Vid!! I get mine tomorrow.... quick question... (I'm a rookie) why do you paint the tiles & jar pre laser??
Ответитьwhat kind of table do you have? look great and sturdy
ОтветитьYou don't sound convincing with your Southern accent.
Ответить