TP-Link TL-SG1016DE - Low Cost Managed Switch

This was incredibly helpful! Thank you 🙏 probably the most concise and easily understood version of VLan setup I have seen.

I do have 1 question though, can you allow or configure the switch to allow the vlans to talk to one another? Or is that defeating the purpose?

Hi Mike! Do you know what is the difference between this TP-Link easy smart switch and TP-Link Omada 16 ports switch like for example this:(TP-Link TL-SG2218 16-Port Gigabit Managed Network LAN)? Apart from being from the Omada SDN family, is there anything different in the functionality?

I have 3 Proxmox nodes each with two 1GB/s network cards. Is it worth investing in a switch and connecting them via the LAG option with 2 cables each, thus increasing the speed almost 2 times? I want to install Ceph, and for it to work better, the speed of information exchange needs to be as fast as possible.
Unfortunately, the 8-port switch only supports LAG, not LACP.

Thanks for good video! I have "little brother" Easy Smart 8 Ports Gigabit with 4 ports PoE+ (TL-SG108PE) which support LAG. I have also Proxmox VE with 3 node cluster, every nod with 2 LAN 1Gb/s ports. Proxmox support bonding -LAG. I have question - if you configure 6 ports on the switch with 6 from 3 node Proxmox VE -Will I then have speeds between 3 nods 2Gb/s?
Thanks en advance!

ok I have a router, and from the router the connection goes to this switch, now... how to login to the switch device?

why do we have to define the vlans twice

Ran out of ports in one of our shops. Bought this by mistake. Can I give it a static ip and disable dhcp and use it as un-managed?

Can i connect umanaged switch to managed switch for extension on my network with same vlan?

I have a question ... Do I understand that port 1 is shared between both VLANs ?
This "smart switch" has been driving mad trying to set up different vlan / subnets but I was using the second option "port based vlan". Still need to try to use 3rd and 4th option.

+

Does anyone know if this switch will allow me to manage 2 ISP inputs and balance them across the network? I was hoping to be able to also set it up so that when one goes down all traffic switches to the one that is working? I sounds like I may need a better device, but was hoping it was possible since I have a new one here.

Could you help me connect to the web interface,I have tried different browsers ??

The only VLAN video out of dozens that made sense, thank you for an excellent explanation

Man how you connect to your switch,i tried with the ip adress and it's not working

Super helpful! Have been scouring the internet trying to find how to set up a vlan and tag properly. Thanks so much.

how to log in into the switch? please help

no segregation 😂

If I use this and create a VLAN for my CCTV and NVR, can I hotSwap my router without bricking my CCTV network? Will it automatically Learn that its not connected to a different WAN without a need to reconfigure or reboot?

If I set vlan 1 port 14,15,16 to not member, i cant access internet, this is my first time doing vlan, didnt do all tag or untagged thing, my isp router doesnt support tag or, i cant found it (ZTE F670L), but if I didnt change it, i can access internet. any idea? or what should i looking for?

Thanks for this video I configured a tp link switch, 🎉

Mike...It's me again! Trying to share one internet connection between two small homes (duplex) and create separate networks for each home. I love the Ubiquiti stuff but too expensive and already have multiple ASUS routers. Can I go from my Spectrum ISP modem...to a managed switch such as this, create my vLans at the switch and then feed each of two ASUS routers (in router mode) using a separate vLan to each ....and accomplish my two separate and independent networks (one in each home....the homes are separated by a party wall and are both very small) with both networks utilizing the one common ISP service? Again...I appreciate your videos and advice! Thanks Mike :)

thankyou for the knowledge
:)

this switch was invisible from my computer... i had to go into the router to find its ip adress. very cool features here for a really good price

Is it just me or is this switch seem slow connected to my ubiquiti ap pro ?

Hi Mike. Love this video. Do you know why whenever I am trying to access my switch, it goes to my modem setup instead?

It's actually a unmanaged smart switch that supports 802.1Q

Thanks Mike

Hi. I wonder how to force dhcp client inside switch (for its internal IP) tu use specific VLAN when asking external DHCP srv via trunk port.

Mike, thanks!!! Your walk-through worked for me! The one thing I was missing was including port 1 (my uplink) in my VLAN. Thanks so much. ❤

how do you set up a trunk port for like a access point where you want 3 vlans to go to access point basically in ciscio ios its a trunk allowed x,x,x ? Thanks for your time

why can't I access the web interface?

Hello, thanks for sharing! I have a question about link aggregation in lag groups: I have a Dell Power Connect 2724 switch that has this function, but Qnap and Freenas don't recognize it, could it be because it doesn't use the lacp protocol? thanks again

Hi Mike, very good video. Wondering if my gateway is in a different vlan than I want to put the switch if that is possible? How would I indicate the vlan that the switch is in, other than statically assigning the IP? Hopefully I've explained my question properly.

Thanks. Excellent video. I've used the affiliate link.

Great info. I'm looking into getting two 24 ports unit same Tp-link series. My one question is how to set-up a trunk to share vlans to a remote (same model) switch. Is it possible ?

Great video. Thanks!

To really understand it, I have one more question.
After doing your configuration in tab "802.1Q VLAN" , why is it necessary to do it again on tab "802.1.Q PVID settings". It looks kind of like you're doing the same configuration on 2 different pages.On the first page it says: "VLAN 80 consists of 14,15,16", then on the 2nd page you say: "14,15,16 are part of VLAN80". Just wondering why this can't be automatic, or why it needs to be done twice. Would there be a reason why or when it wouldn't be the same on both pages ?

Excellent video, Mike. Explained better than their documentation :)

support snmp?

Hi Mike, Super simple explanation. Thank you. I am in the market and will purchase this switch, based on your video.
As IoT is 2.4Ghz WiFi in most cases, how did you assign the IoT VLAN to your IoT devices?

Does this switch support managment for a PPPoE connection?

thanks Boss Can i Ask u about this Switch TL SG1048
how to configure tp link sg1048 FOR CREATE VLAN

I WAIT UR ANSSER

how to configuration vlan TL sg1048

I was a bit confused to configure VLANs on that switch and your video explained it very well how we can do. Thanks !

Nice video Mike. I am considering the PoE version sg1016pe (if i find one in decent time) or just add a PoE small switch to this, as i have 3 PoE cameras.
How about port speed? I will need very fast LAN for large file exchange and backups (currently synology NAS with double link). Plus I also need to connect a couple ports to two wireless routers to bring signal to another part of the building. Do you advice this switch for such a small office network?

So are the ports automatically Isolated for traffic or is it the job that the firewall recognizes those vlans and applies the isolation rules to pass through to the switch?

I have the unmanaged version. Is it possible to run the input signal off of the wireless? My router is in the house, but I want to set up an operation in the detached garage. no easy way to run ethernet to it.

What is the difference between the TP TL-SG1016DE and the TP TL-SG116E ?

Does this switch support VLAN trunking ? Let's say I want to create 4 VLANs and put 2 VLANs on port 2 and another 2 on port 3. Will it allow me to do that ?