How to use rosin when soldering

The music aaaaasggggghhhh

I learn new resin +alcohol BUT WHAT ABOUT resin +light acid???
THANK U GOOD TO learn

How long does the rising core cool after soldering?

This is so helpful, thank you!!

There’s a reason professionals use commercially-manufactured flux: it works better than pure rosin. Fluxes contain activators in addition to the rosin, which make them far more active (capable of cutting through more severe oxidation). I made rosin-in-alcohol flux once, and while it’s better than nothing, it doesn’t come close to real flux. I use it for one thing only: to create a protective coating on freshly-etched (homemade) PCBs. The rosin coating prevents oxidation and doesn’t need to be removed before soldering.

i put my solder iron in rosin flux and my solder iron stopped working.. it fails to heat up. sigh

转移焊接是不对的。这是一个错误的示范。😄
Transfer soldering is wrong. This is a wrong demonstration.😄

What if I simply dump the wire tip into the solder paste AND THEN get the soldering iron in contact with the flux'ed wire?

Ah, so I wouldn't use this to folder the charging port of my phone?

Title of the background song?

Thanks for taking the time to share this with us!

I just use it as a hot dip lmao

Sorry, thumbs down. You are making me read. while, I am trying to watch the demonstration. It’s too fast. It’s too much. Dumb it down. Talk me through it. Ditch the music. No disrespect meant. Just some advice from a professional teacher.

it's funny i gather rosin for fun and have been doing so since i was young. i was going to make incense with it.

I watched over a minute of this video before i was certain it was not weed related...

I am just getting started with learning electronics.
I just received my beginner kit and it has a small round plastic tub of "soldering paste" but I had no idea what it was for.
Eventually i discovered it is supposed to be a tub of flux/rosin, but i had no idea how to use it.
This was very useful.

thanks, you have answered my question about the thing. What kind of alcohol did you use?

What kind of alcohol brother?

Simple and good I will review this again before I start soldering

thanks

Thanks for the info! I just started learning how to solder and my Uncle let me borrow his iron and some rosin core solder. I wasn't sure if I needed flux or not.

..thank you..

Hii and thank you for useful information
Please can you tell me how to remove excess resin from electronic board after
soldering ??
To use alcohol?? or how?

I thought I was doing something wrong when I would chip it off and put it on PCB. Well, I guess not then.
I think I should buy flux paste instead.

Nice vlog po Ito pinapanuod ko video nyo ngaun po pa hug Naman po sa bahay ko po 🙏🙏🙏🙏

Superb. Thanks.

thanks sir

Simple, short, clear and excellent.

MuteTube. Worthless. Easier to watch a video with narrations instead of trying to read and look up at the video.

I can smell the rosin through the screen.

Why in hell are you dipping your soldering iron in the flux... People will think that's the way to go.

Thank you for this vid! I ordered a soldering kit and it came with one of these rosins, so I wondered how to use it. Guess I do now!

👍👍👍👍👍👍

Thank you. this is cheaper than solder paste

When dissolving rosin in Alcohol, is there a particular ratio to follow?

well done. you are the master of soldering.

Thanks very much!

👏👏👏👍👍👍

Thanks so much for sharing this! I subscribed. The video was very helpful in understanding solid rosin. I’ve usually heard people call it flux. I use this same material when I am soldering, but I didn’t realize that it had other names!

You are NOT supposed to "carry" solder from the iron to the work. You are supposed to heat the point or wire you are going to solder with the iron and then put the solder to it.

I threw away the rosin that came with a cheap soldering iron thinking it was bad, as it was solid.... My bad I guess

Ive had this for years and finally used google translation on the packaging 🤣 i had flux this whole time thanx for the video

Well that answered my questions thoroughly

Is it works on aluminium foil?

Just learnt loads thanks mate gonna subscribe right now👍

Can I use white spirit? It dissolves wood sap/resin.

Earlier today, I 'Dislike'd a video for having no narrative and irritating music. You saved this one with good subtitles, but narration is definitely recommended. (If you really don't like the sound of your own voice get a friend or relative to narrate it for you, but don't use a voice synth, for they are the path to the dark side.)