YAESU FT-710 FIRMWARE STEP BY STEP UPDATE(Perform Reset Once Completed)

YAESU FT-710 FIRMWARE STEP BY STEP UPDATE(Perform Reset Once Completed)

2,819 Просмотров

patreon.com/M0FXBHAMRADIODIARY (Perform Reset Once Completed)https://www.youtube.com/watch?v=6byjG9hKn0A
YAESU FILES SECTION
https://www.yaesu.com/indexVS.cfm?cmd=DisplayProducts&ProdCatID=102&encProdID=615ADFEAB5EDBC65EBE1D64835F209DB&DivisionID=65&isArchived=0

FIRMWARE 2023
https://www.yaesu.com/downloadFile.cfm?FileID=17879&FileCatID=42&FileName=FT%2D710%5FFirmware%5Fupdate%5F202311.zip&FileContentType=application%2Fx%2Dzip%2Dcompressed
INSTRUCTIONS
https://www.yaesu.com/downloadFile.cf...

USB DRIVER
https://www.yaesu.com/downloadFile.cf...

CHANGELOG
[FT-710_Firmware_update_202211]zip Contains:
• MAIN: V01-06 /FT-710_MAIN_V0106.SFL 11/14/22 (New)
• DISPLAY: V01-05 /FT-710_DISPLAY_V0105.SFL 11/14/22 (New)
• DSP: V01-00 /FT-710_IFDSP_V0100.SFL
• SDR: V01-03 /FT-710_SDR_V0103.SFL
• Firmware_Ver_Up_Manual_ENG_FT-710_2211A 11/14/22
Implements improvements:
1. Fixed a bug that "Key up" noise appeared when operating in CW mode on 28MHz band.
2. Fixed the problem that COM Port Baud-rate becomes 4800bps when power is turned ON with
"PRESET" ON.
3. Fixed a bug that sometimes-prevented transmission when a linear amplifier (VL-1000) is
connected.
4. Fixed a problem that continuous operation or hang-up may occur
when playing/rewinding/forwarding recorded data while receiving a signal.
5. Optimized variable volume and minimum headphone volume when turning VOL knob.
6. Fixed a bug that caused a delay when an external CW KEYER is connected.
7. Fixed the problem that CW transmission may not be possible with the straight key.
8. Fixed a bug that CW does not work properly when "BUG KEY" is selected in
"KEYER TYPE".
9. Fixed a bug that PC KEYING did not work partially in CW mode and CW AUTO mode.
10. Fixed a bug where changing the Baud-rate of COM Port is not reflected correctly.
11. Other improvements and optimizations have been made.
Ссылки и html тэги не поддерживаются


Комментарии: