Комментарии:
For easy to understand, the devialet phantom for example it's weight itself, why it's heavy?? And making a implosive sound??
ОтветитьHere some answers why should it make some additional solid weight, to produce power sound that you make it feel the every beat of bass , to make it stable in position, because if it's make to produce a powerful sound or bass (according to size or physical appearance or structure) it must hold it the power, that's the secret of all good quality speaker the makes power sound, just try to listen to a powerful speaker and yet have a poor speaker box or light weight material to be a box,less power of punch and the sound is minimal and distorted and more on vibration that makes you annoyed you at the end.
ОтветитьI can't think of a reason that adding weight to a product would be a problem. The 'premium' feel has always been that heavier is better quality. If it's very low weight, we think of it as cheap.
ОтветитьI love to turn the bass down on my phone so it lasts all day!
Only issue is the power button dosemt always work!
Wow
ОтветитьThe metal is PLATE 😊 ONLY VALUE IS THE PLATE
ОтветитьObviously made to stay intact. Not designed, or expected to be taken apart.
Ответитьis this original? I need to know the code of the integrated amplifier..
ОтветитьThanks for wideo❤
ОтветитьJbl go 3 fake😊
ОтветитьMy go 3 looking at me like : 👁👄👁
ОтветитьYou are a big... lol
Ответитьon mode and push hold -vol & bluetooth button at the same time until item off. now your in LFM(low frequency mode) is activate. a.k.a bass booster mode👍👍👍
ОтветитьBruh what is that phone
ОтветитьYour smartphone look so nice
ОтветитьWhat is that scale
Ответитьเหล็กชิ้นนั้นเขามีไว้เพื่อถ่วงน้ำหนักเวลาตั้งตอนเปิดเพลงจะได้ไม่ล้มไง
ОтветитьThis is the worst tear down I have ever seen, also there was no reason to remove the back rubber pad, I can tell u had no clue what you were doing, next time watch a tear down from another channel to get a clue cuz I can tell u have none also I have seen the go 3 tare down in less than 10 minutes, this tool you an hour are u a dimwit or what? I honestly couldn’t believe you got it back together
Ответитьis that original jbl go3?
ОтветитьThe metal block is used to balance the speaker center of gravity, to avoid speaker drift during loud music playback, jbl has calculated it, not a volume cheating trick.
Ответитьits possible to put the grill back?
ОтветитьI also say it's a stabilizer, but I also think it makes the sides more rigid in case you drop it the sides won't collapse so it won't hurt anything that's inside. Did anybody notice the bass response went way down when he did not put that part back in. I believe because that part fits tite against the sides it adds to the bass response thus making it like sound a much bigger speaker. I've been playing with speakers since I got my first tape recorder back in 1972 when I was 10 years old. I only say that not to brag but to just to say I've listened to a lot of speakers over the years and to me this is the best sounding speaker for its size that I've ever heard. I was so impressed with mine I bought 2 more for my friends for Christmas presents and they love it.
ОтветитьGood video. But you should upgrade to more quality camera, for example with more fps to rise the quality(when some viewer pause to see something specific, to have a nice quality frame to look at) You also should add a some kind of conclusion at the end, what are your thoughts about the specific device that you disassemble and reassemble. The build quality and parts used by the manufacturer.
Ответитьcan i get bin jbl clip 4 instead of jbl go 3?
ОтветитьYeah the weight is like a ballast stone so to speak. The Clip 3 has it in the flap that covers the aux in and charging port. If they are floating I guess, never tossed mine in a pool. Not that I think it would stop working, just never really needed to.
ОтветитьMy broken 2 months speaker jbl go 3 inside something is flying haha
ОтветитьTry to think positively and don't keep making assumptions. Do research and don't spread defamation🤗
ОтветитьThey put the wait there for two reasons as far as I’m concerned. They put it there to help the bass sound a little more firm. I’m sure the low and sound would sound different by removing this piece of metal. Also to help prevent it to tip over.. I really don’t think JBL put it there for the reason you’re explaining.
ОтветитьSurly the extra Weight is to stop the speaker falling over.
Ответитьman, it took me like 10 seconds to get the cover off, just put it under and lift up lol.
ОтветитьOmg you did it the wrong way!! It's easier to take the grill off the speaker.
ОтветитьND: No srews
CS: 2 screws on two Sides
DT: 6 screws on left , right Side and behind the gummy Grab
what are the QR Codes that are inside the speaker?
ОтветитьThat weight is to help it stay up
ОтветитьPlease make teardown video of noise vibe 5w speaker.
Ответитьniiice
ОтветитьThey put the weight there so the speaker does not tip over as much when you stand it up the way it's supposed to be and probably stop the speaker from bouncing around too much they made it bottom-heavy for a purpose there not trying to make this speaker heavier if that was the case the extreme three would be heavier it was a good thought by JBL they're not cheating they're thinking
ОтветитьAbrir uma JBL é fácil difícil é ver vc fazer do jeito errado da até agonia.
Ответить