Тэги:
#nintendoswitchbrokenscreen #broken_screen #Nintendo #Nintendo_switch #Nintendo_switch_broken_screen #Nintendo_switch_digitizer_does_not_work #how_to_remove_Nintendo_switch_screen #Nintendo_switch_broken_LCD #broken_LCD #nintendo #switch #joycons #joycon_broken #broken_switch #switch_won't_turn_onКомментарии:
Hi, I just wanted to ask something. See if a switch starts having phantom touches after updating the system, would that be the digitizer causing that or would the update have been responsible? I'd really appreciate it if you can responnd to my comment.
Ответитьhay pantallas OLED para ese modelo de nintendo switch?
ОтветитьHey will this work on a switch lite?
ОтветитьHi I just ordered two digitizers and lcd replacements and both lcd replacement don't work the digitizer does but the screen is still black please someone help
ОтветитьHow do you center de lcd?
ОтветитьWill a new lcd will work on a switch with crazy flickering? Dockmode works perfectly fine.
ОтветитьWhere can I find a Digitizer HAC-001 compatible... I got one from ebay which only works on its corners
ОтветитьHave you ever had it where the replacement digitizer works except for the middle of the screen any tips
ОтветитьI want to replace my digitalizer but I’m afraid I will damage my switch, are there many possibilities to damage your switch during this process?
ОтветитьSo beside the water or factory defective...If you press it hard , will it damage as well? Like when you press on LCD computer monitor, there is always a black mark that shown and as soon as you release it ..The mark disappeared ... What happened was when I installed the screen protector, I didn't know the screen was plastic and I presses hard to make the bubbles away from the screen protector ...Will I damage it?
ОтветитьI want to replace my digitizer only but i don’t know the exact way
ОтветитьWhenever you get a tiny line through the screen like that, it's never the cable or the connector. If the connector was faulty then you'd see alot more than just a single line across the screen.
ОтветитьAffter change the screen have you ever had error 0002
ОтветитьWhat if all of the there’s a line every where on the console
ОтветитьHi nintendo can you fix it plz I subbed
Ответитьit worked for me but if anyone plans to do this be carful it took me 4 hours to do
ОтветитьThere's been dust inside the screen of my switch. Just want to ask if I have to completely remove the digitizer or I could just lift it up
Ответитьhey my little brother droped my switch lite and the screen is now broken would you fix it and if so how much would you charge me
ОтветитьHey bob will u fix my switch I subbed plz
ОтветитьThank you for detailed video, I've ordered digitizer for my switch and planning to replace it when it comes, do you have a recommendation regarding how hot the heat gun should be? I mean the temperature which you can safely heat your switch and not damage the lcd behind it. Hundred and twenty seems too hot for me, what about hair dryer? Could you suggest the best way to peel the digitizer if I ever use hair dryer. Thanks
ОтветитьHello, quick question, how can I just remove the digitizer? Some dust was inside my switches screen and I just wanted to lift it up a bit to remove it from the inside. I wouldn’t have to unscrew anything right? Just heat it up and lift it?
Ответитьa huge thank you for this, every video I had seen previously made it seem like the LCD was not adhered to the digitizer, and this deterred me from attempting any screen-related jobs due to concerns with dust. however, shortly after watching this, I successfully removed a nice JDI LCD that I can now swap into my personal unit :)
ОтветитьI don't have a heat gun, what is an alternative to that?
ОтветитьSo what's the trick to remove the digitiser only? Do the mb screws hold the LCD in place??
Ответитьbless you
ОтветитьHi Bob I replaced the screen on my nintendo switch I feel like everything went smooth however I do not have power now.. so I thought i may have been too rough on the battery getting it out, so I replaced it and I still have no power and it will not take a charge .how can I troubleshoot this situation with ohm meter or any other way?
ОтветитьWhat is you just have the lcd and want to replace the screen without digitizer
Ответить