Комментарии:
Sweet install ladies!! -Any cause for concern?? I recently had my LG 86" UQ8000 installed by two Jacklegs I found on Yelp. I provided the TV mount kit [unopened] and a Power Bridge outlet kit. After the installation I checked the TV mount kit's box and they did not use ANY of the supplies/screws included. The TV was mounted off center by about 6-8" and they told me it was because the mount did not allow them to "slide" brackets. I feel extremely nervous when adjusting the TV even though it appears as if they used lag bolts to mount it. I found it pretty strange they did not remove ANY of my equipment [i.e. huge 35lb Klipsch center channel, Onkyo AVR, gaming consoles...] from the entertainment center to get behind it and the next morning I discovered they destroyed the underside of it by DRAGGING it across my Berber carpet. They initially wanted to repair it and have since told me they will order me a new one.
ОтветитьThe video was ok. The music was annoying.
ОтветитьDid you drill pilot holes for the lag bolts?
ОтветитьWow what an upgrade from 55 to 86 😮
Ответитьway too high
ОтветитьI love the way she opened the side of the bags when the top was already opened 😆
ОтветитьVery impressive! Nice job ladies
ОтветитьWow why is it on the moon??? The directions even say center at 42” which puts this 20” off the ground 😂😂😂😂
ОтветитьIt's soo high that I'll have to stand and still lookup to watch some movies
ОтветитьMount a piece of 2 x 6 over the trim with bolts into the studs. Mount the TV onto the 2 x 6 with long bolts.
ОтветитьYou should invite giraffes to watch movies with you that high.
ОтветитьGreat video! Is the tv still holding up?🎉
ОтветитьI'am going to buy my son the LG NANO75 86" tv but the wall mount i'am getting pulls out 24" from the wall and swings 120 degrees, so there is enough room for hooks. I found a wall mount on Amazon for $109.00 but found the same one on EBay new for $55.86!!!
ОтветитьToo bad that the way of the world now is for collossal TV's and barely any or no books, nor original artwork. As the case appears here....
ОтветитьImpact driver to remove TV screws.....😃 time find another video.
ОтветитьI have that same model LG 86'er. Its big. Unfortunately I never have time to enjoy it.
Ответитьwith all that space I could have a 120" projector.
ОтветитьVery peaceful background music!
ОтветитьNice LG!
ОтветитьSo is the spacer not necessary for a tv mount that swivels and tilts
ОтветитьTotally off topic. But yall bought your place with the trim on the wall like that or did yall install it? I've seen houses with that style but the walls are a smooth texture and not the orange peel that is on your wall, but it still looks good.
ОтветитьGreat job
Ответитьway too high nice stiff neck. I wanna look straight at the screen I don't wanna look up. Anyway nice job. I see too many people putting the TV so high.
ОтветитьA tv never should be mount that high is not practical, tv should be mount lower in the living room 👎
ОтветитьI just bought a LG86 inch at Costco. I initially wanted to mount it into a a similar wall mount as displayed on the video. However, I decided to mount it into a flat one into 3 studs to secure the the from falling down. I however wanted to ask you guys about your opinions regarding 2 studs (4 long screws) mounting with a mount wall as displayed on this video. How safe is it? Have you guys experienced any significant negative effects from the tvs weight?
Ответить👉👍👀
ОтветитьYou know women did it when the tv is pretty much hanging from the ceiling, they just don't care.
ОтветитьAwesome video. I am pretty much set on getting this TV in the next few weeks for my new to be designed movie room. Loved the bracket tips!
ОтветитьWe have the same tv and mount but the difference is our mount always tilt down and its scary because we don’t know if its a loose screw.
ОтветитьSubscribe button ON.
Love the video. Simple tips, I’ve been looking a video like this to set up my two brand new TVs.
Thanks.
That doesn't look good.
ОтветитьHave fun with the neck pain. Jesus its higher than you are tall. Who does this
ОтветитьI do think it’s a bit high. I think with the bracket away from the wall the moulding is not disrupted.
Ответитьgot the same tv was to scared to put this one up feels like this tv will pull the whole wall down
ОтветитьWhat screws did you use m6 12mm?
ОтветитьAny problem with the tv sagging, tilting down on the mount?
ОтветитьFirst major rule of putting a bracket on the back of a TV is you never ever use a power drill…..
ОтветитьMy ocd not letting me accept the placement of the tv it’s off center from the trim pattern on the wall, and it being half on the plane and half on the trim pattern is bugging me 😫
ОтветитьWhat is the name of your stud tool? Looks really good. Well done on the TV mount.. I think i would be scared of the mount movement incase the TV adds too much load stress to the mount
ОтветитьHello n hi, would ya put power, cable box cord etc on first be you hang this big tv on the back? Bcos I have the same one but it's a 65 and some day I want to go bigger thanks and enjoy your big screen TV 📺
ОтветитьImpact driver 😬😲😵
Ответить뭔 TV를 저렇게 높게달아 ㅋㅋㅋ
Ответить86 not too big much better 100" LG TV
Ответитьthank you.
ОтветитьTv looks like it's 110 inches lol
ОтветитьWhy so high up?.
ОтветитьIs there are way to lock in the tilt angle?
ОтветитьI need a tv that big seriously
ОтветитьBuy laser TV and save space
ОтветитьThank you guys so much for posting this. I'm a girl and I thought it too heave and almost gave up!
Ответить