IoT Project using ESP32 Google Assistant Blynk with Timer & Sensor | Home Automation System 2022

Sir please giveme password Garber file open

Sir i have some questions... Can i contact with you

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please
🔽🔽🔽🔽🔽🔽🔽🔽
// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please

// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Please add this into your code please and send me sir please

// Checks Network connection status in every 5 seconds
void Network_Checkup() {
if (WiFi.status() != WL_CONNECTED) {
WiFi.begin(ssid, pass);
delay(10);

Спасибо👍

@Tech StudyCell Bro, i just want to know that how NodeMCU will get signal abt the real time status of bulb whether its ON/OFF , Which Sensor u have used to know the Real time status of Bulb, fan, etc....

what is there is no internet or if the wifi is off ?

It doesn’t work the ir controller why?

cloud we add an Arduino code when i press a button (ex:pin 5) for 10 seconds break the current process and create an access point to input WiFi-ssid and password and blynk authentication code then reconnect to wifi
in-case i changed the WiFi credential

I just implemented this project following this great and carefully guided tutorial. Thanks a million.

Thank you for the great video, i think automation option is not avilable for free Blynk users

response me sir plzz

The function decode(&results)) is deprecated and may not work as expected! Just use decode() without a parameter and IrReceiver.decodedIRData.<fieldname> .

Hlo sir I had a esp8266, would this code will for it

The function decode(&results)) is deprecated and may not work as expected! Just use decode() without a parameter and IrReceiver.decodedIRData.<fieldname> . i face this issue plz tell me

/storage/emulated/0/ArduinoDroid/userlibraries/IRremote/src/private/IRTimer.hpp:1373:50: error: missing binary operator before token "("

Sir i have found this error
How can i solve it plz help🙏🙏🙏

Sir, pls uploade a vedio of home automation, it consists 16 Chanel relay, each realay control manually + IR+ BLINK

thanks for ur video , i have made some changes to use 8 relay , im getting error ""pin 5 not included in the scope " kindly advice

Can i try this code on esp8266 module ???

J'aime bien vos projets alors faites aussi des vidéos en Français pour nous qui parlons uniquement que le français

Sir, I have 1 question. I have connected AI Thinker ESP32S module to 16 Channel Relay module.
It is low trigger relay. So when I run the blink program of Esp32 ( No Arduino .Only Esp32 and relay module), using Arduino IDE, Relay should turn ON at Low and turn OFF at High. This action should repeat continuously.
But the problem is When I connect relay pin to esp32 D2 pin, the relay is turned ON and always stays in ON condition. No OFF action happens.

Please provide solution.

My brother, how much you paid for PCB?

my esp32 board is not reconnecting after lost wifii connection plz guide me to solve this issue

Very advance. Sir can you add 8 Relay This project. and Can you Remove IR remote option

Hello Techstudycell, I have been following your videos and I have made some of your IoT automations. I appreciate you for all these nice videos.

In the codes for this automation (Both Latch and Button codes), when compiling the code, I received an error message about "BlynkTimer timer;" function, In the error message, I saw "Conflicting declaration BlynkTimer timer" please How can I solve this? Thanks.

Can timer work when no internet ?

Very well managed project on suggestion to add dc voltage and current measure as now a days all the home appliances are operated on dc voltage so on can monitor completely and some flaws are there in project when no internet is available for long device get hanged no control over push button as well as remote so we need to restart the device plz make this fix with updated virtual pins for voltage and current ...

Bro I made a 6 channel home automation project for my college after watching your video.

🟢 Now I want to make another home automation project using 8 channels instead of 4 channels like this video, which will include google assistant control, 8 channel relay, temperature monitoring, IR remote control, manual control, blink app.
🙏🙏🙏 Please, please, please make a video like this.💝💝💝

Super video

can you please do ESP32 PCB design with 16 relays, IR, BL and wifi control, including 5V regulator. Basically only one ac in, and 16 switch control out. Controllable by IR,BL and wifi

Can I do this using ESP8266?

how much did it cost in total for developing this projectt??

Bro please design a pcb for this to use directly on AC supply 220volts without 5v additional power supply

What is the alternative of IR sensor?

Amazing project, thank you for sharing. Could you do a voice control of an analog signal, like controlling a servomotor position with google assistant?

how to triger vooc charger without smart phone
or how to convert vooc charger to PD charger

Sir es code ko ESP8266 m upload krne ke liye kya changes krne honge?

It is very usefull project and i have been seen other your projects that's are also amazing and very usefull

Sir may you start playlist for IoT home automation. I want to teach from you

Sir please replace GOOGLE Assistant with ALEXA and make a video