Комментарии:
Je i9 13900 H Raptor Lake v notebooku Asus Vivobook dobrá kombinace prosim?Dekuji za odpověď.
Ответитьwas mir aufgefallen ist, das mein i7 13700k auf einem gigabyte z690 gaming x ddr4 booard bisschen schneller läuft (5,45) mit enhanced multicore bei 271w als mein jetziges asus prime z690-a was sich da moderat zeigt bei stock speed (5,3) und max 242w. ebenfalls enhanced multicore aktiviert und ohne limits. sollte es eigentllich nicht umgekehrt laufen? das asus board ist doch in punkt vrm deutlich besser aufgestellt. nichrt auszudenken, wenn gigabyte diese defaults auch beim z690 ds3h so belässt. danke für deine videos, hab schon viele stunden abschalten können und meist was mitgenommen. und wenn es einfach deine videos in englischer sprache schauen ist.
ОтветитьIntel Extreme Tuning Technology has solved this issue with its own Optimization Software that analyzes your system and gives you the best stable overclock. I have two 13900k Systems and both are Optimized to hit 6.0Ghz on 3 P Cores and the others on 5.7Ghz and the E Cores on 4. 5. Temps are in the upper 70s to mid 80s. I’m fine with that.
ОтветитьFair warning some boards cant be undervolted due to msi being dicks.
ОтветитьFirst new build in years and my dumbass got an i9, great video thanks for the work!
ОтветитьThere is an easier way to undervolt Asrock board:
CPU Vcore Compensation = Level 1
Cpu Core/Cache Voltage = Offset Mode, enter negative value to maximum -100 mV.
Base Frequency Boost, this is PL1, set it to any other value than Auto to optimize it further
There is reason why Asrock put vcore compensation and base frequency boost prominently in the bios, at the very top of the OC Tweaker section.
Also, setting 181W for the 13600K would reduce the CPU temperature?
ОтветитьReducing the voltage, will reduce the temperature of the CPU?
Ответить13900k with noctua Nh-d15s 41º idle 70º in game
ОтветитьHWiNFO64 's Core VIDs shows 1,280V, while CPU-Z shows 1,462V. Which should i consider ?
ОтветитьMy 13600kf purchased August '23 in a MSI Z690 Edge DDR4 mobo doesn't run hot, i was expecting 90°C running Cinebench but it stabilised at 77°C. Tweaking the fan profile got it down further. Great productivity chip and gaming performance is good.
ОтветитьHWiNFO64 shows 1.286 volts for my 13500, but cpu-z at the same time shows 1.526 volts. my mobo is msi 760 meg tomahawk. what price should i consider ?
Ответитьnever set voltages by hand as in this video, only undervolt with an offset, e.g. up to 100mV
ОтветитьWell... I have undervolted and tested different voltages...
My i5 13600K was at 100°C stock.
No matter how little I lowered the voltage, there was a slight dip in performance. And there was always thermal throttling, never going below 100°C.
Obviously the first thing to consider is if the cooling is adequate, right? Well, yeah...
I have a bequiet cooler capable of 250W of cooling. Should be ok, no?...
I have checked my mounting on the CPU and the paste application... Everything was in order...
Unfortunately, although I know it's true that you can get better temps with undervolting, I must have gotten a shitty sample... My guess is either that the CPU or CPU isn't flat enough, or even worse that the die doesn't make good contact with the IHS (that's what the cover is called, right? 😅 ).
I won't be trying to fix that cause I want my warranty, but unfortunately I can state that sometimes some people might just not be lucky...
Having 40°C at idle and immediately skyrocketing at 100°C when stress testing is dum... But I guess that's what you get with intel lately...
I just wonder if my intel choice is actually faster than the AMD I was considering... With the shitty sample and high temps I mean...
I went with an intel CPU because it was supposed to be slightly faster. But is that really the case when constantly thermal throttling? I'm not so sure anymore...
How are you working out your MAX PL2: Wattage?
ОтветитьYou can also reduce the CPU temp by installing an anti-bending buckle.
ОтветитьGreat video mate. There is an yt channel that has set the PL1 70 and PL2 70; without undervolt and found minimal drop in performance. But the tester had worked at other watts; and in other testings had also applied undervolting.
ОтветитьAwsome video
ОтветитьSucces !
I Succefuly Fried my CPU ! Thanks Man helped alot !
This will void the warranty ?
ОтветитьAnyone know where I could change this on an ASUS Z790 hero? Can’t seem to find it anywhere and don’t want to mess anything up at least the power limiting
ОтветитьCan 760 I strix undervolt 13600k?
Ответитьcan asus b760i undervolt this cpu?
ОтветитьU dont read v core off of vid are you crazy
ОтветитьBro. Answer please
I build pc month back. And it's over heating.
Config
I7 13700k
Rtx 3090 ( republished Card)
Cooler master 360mm aio
Cooler master td500 mesh case.
Will playing gta v CPU reach 80.
And come bench it's reaching 100. Is this normal or not
( Have 3 intech, 3 exhaust fans on top. No single exhaust fan in back side )
This seems like it might be an ASRock thing for the voltages. There might be some other setting forcing the CPU to run as close to the 1.365 V instead of applying the manual voltage. Should probably check into that so you can get lower voltages
ОтветитьI prefer using xtu and testing at the same time. If it crashes, it resets automatically
ОтветитьMSI motherboards makes this very easy with an option called CPU Lite Load, default is level 9 and I just set mine to level 5, significant drops in power draw and temps without a reduction in performance, can go all the way down to level 1 if stable.
ОтветитьDo i understand it correctly (i guess that 1.460 you put in BIOS got me confused)? You manually set the voltage (but only if the offset mode is limited) excactly the same as stock readout during the 1st benchmark run? And then go lower by small increments to keep the clocks readouts the same, also setting a load line level high enough not the got drops. Is that right?
Sounds convincing and not that hard, but there are some threads around the internet that say it's complicated and that you need to fine-tune AC_LL and DC_LL correctly to do it, which is way more difficult, when you read it. What do you think?
Would have liked to see you measure the wattage.
ОтветитьGreat instructional , I was wondering why the vids where high ,
13600kf around 66c turbo on speed step etc all the good things no park cores
I might be stupid but is cpu power limit throttling bad for the cpu in the long run I just can’t seem to get rid of it pl 1 and pl 2 125 and 253
ОтветитьAsrock's Load Line Calibration is backwards compared to Asus. Higher LLC on Asrock boards actually increases Voltage droop. That's why the actual voltage was lower than what you enetered. Because you set the LLC higher-----which actually lowers voltage at load, on Asrock boards.
Ответитьmy 13600k is between 54 to 64 celsius (Stock bios, just xmp enabled) . i just play games. i dont mess with settings no time for that. i cool it with Noctua NH-U12A chromax
ОтветитьHow bout Solid State active cooling?
ОтветитьThanks! I Was just banging my head for the 250W power consumption in my new 13600K. I set 181W top in BIOS and after undervolting to 1.220V (doing some stress tests now, with 1.20 crashes)
ОтветитьYou totaly dont undarstand what are you doing. Vid is voltage in tables, that CPU has for voltage/freq curve. Not voltage that is on CPU.
ОтветитьTnx for the video. I think options for AM5 is better
Ответитьits interesting to see how 1-2 decades ago overclocking was the ‘thing’ to do …… in recent times (~3-5 years) the focus has switched heavily to undervolting, even before energy ⚡⚡costs we’re skyrocketing 🤯! I’ve been doing simple ‘quick n dirty’ undervolts for about 5 years now and seen decent and noticeable (in software / bios results only) reduction in system / component temps and power draw 💪🥳
ОтветитьMy 13900kf was the hardest to tune. You have to undervolt it if using an aio.
Ответить👍I haven't watched the video yet. Very interested in this topic.
Only time my 13700k temps get ridiculous is running cinebench. I fixed it with a minimal undervolt.
Running 13700k, Z690 ASUS TUF D4 MoBo, 32GB DDR4 3200mhz, ASUS Ryuo 240mm AIO, ASUS TUF 3080 12GB, Enermax 850Watt D.F.
Great video, I was looking how to do this on my new Asus 790 mobo, the settings were a bit more confusing than what I had in my 500 series msi mobo, for now I just set a wattage limit for both short and long duration and a temperature limit.
Ответитьseems like you are looking at the wrong voltage, Nic.
I have learned that VID is the voltage that the CPU requests, it is NOT the actual voltage the mainboard applies (vcore).