Тэги:
#CPU_BIOS_Set_UP #cpu_mining_overclocks #cpu_mining #rabid_mining #cpu_mining_bios_settings #setting_up_a_bios #pc_bios_setting #bios #bios_overclock #RAM_timings #RAM_OC_bios #motherboard_bios #crypto_mining #how_to #cpu_mining_setup #pc_hardware #pc_build #ethereum_mining #cpu_mining_farm #3900x_mining_rig #how_to_overclock #cryptocurrency_mining #mining_rig #cpu_mining_profitable #rabid_mining_cpu #gpu_mining_dead #mining_rig_profit #motherboard_bios_settings #btc #rtmКомментарии:
Hope This Helps You Set Up Your CPU Rigs :)
ОтветитьHave a b450 msi Gaming Plus when in bios, under Integrated Periph there is no option for VGA detection?? It's not available to select. I'm stumped have 2 others no problem ???? Any suggestions please
ОтветитьWhat would be the best options for a ryzen 5 3600?
ОтветитьRM is the mobo need the x version for cpu mining?
ОтветитьBro what clocks should I use for my ryzen 5 3600 , mobo- b450 steel legend ASRock .
My cpu temp is above 90° .. on RTM.. please help.
1 volt be ok with a 5900x b550 a pro motherboard?
Ответитьwhy do you use a power switch when you can just jump the pin with a screwdriver
ОтветитьHi Rabid. When I’m using the Ryzen master, stock CPU clock is 3800 MHz while stock core voltage is 1.0875 volts. Motherboard is Gigabyte B450M DS3H. I try to use your setting 3700 MHz and core voltage of 0.975 but when I test that setting, it says not stable in Ryzen master. I can’t do it on the BIos.
ОтветитьThank you! What coin are you mining now with CPU?
ОтветитьHi Rabid can you make a video for motherboards,which can handle 3900x,5900x cpus,i have msi b450a pro and asrock b450 steel legend using currently on ryzen 5 3600 both of them, i try to undervolt but it does not perform any better,and getting crashed,i really appreciate if you do mobo tier list all b450,b550 x570 x470 (x470 really hard to find but ok.)
And quick question what do you think about msi b550 gaming gen3 mobo is it enough to handle 3900 or 5900 cpus.
What frequency for the CPU at 0.75v ??
ОтветитьI was checking available coins that can be mined with a 3900X and found that $xdag is almost 3 times more profitable than others, and uses similar RandomX algorithm!
Wondering why you never mentioned it, any reason?
Rabit: can you do over clock for Asus X570 or Asus B550?
Ответитьhow you able to boot those rigs without GPU attached to the system ?
ОтветитьI am thinking about dual side motherboard, you will just have to rotate 1 upside down to fit in...
ОтветитьAre you sure overclocking is a wise idea? I get worse efficiency for all overclocks on 5950x and 3950x.
ОтветитьHey Rabid thanks for all the info my guy. Question though, where can we get the mobo angle brackets? I dont have my own 3d printer and would like to purchase some to improve my density. Thanks and happy mining!!
ОтветитьThanks rabid i have 2 of those and have been running a old 7 series gpu in each cause I didn’t know about the vga disabling. They wouldn’t cpu mine without a card. All my other boards just work without vga. Much appreciated
ОтветитьAgain... electronics on the carpet makes me cringe
ОтветитьWould these settings also apply to a 5900X?
ОтветитьCan you point me to the motherboard vertical stands? I've looked on thingiverse and cannot find them. Setting up my first cpu miner and need to save some space. Thanks for all your videos!
ОтветитьI have a EVGA 1600W PSU, can I split it 4 ways by daisy chaining the PSU splitter cable?
ОтветитьYou have an aggressive amount of cpu rigs
ОтветитьWhat hash rate do you get on xmr with one of these ones?
Ответитьwhy not use xenon?
ОтветитьI'm trying to setup an XMR cpu miner in a closet at work. I keep getting an issue with the work router, as it does not let me change the DNS. I'm using NordVPN but can't make changes to the work router because I'm not admin. Anyone know what's the best DNS strategy to use? To setup a miner at work for Ethernet and using work router but making sure miner is not detected via DNS or IP?
ОтветитьHey ! Thanks for this vidéo 😁what is the Sku for the M2 installed? Thanks
ОтветитьCan you do the gpu mining setup? I know there's a way to get all the cards to show up but I can only get five out of the six.
ОтветитьWhere do you get the motherboard stands?
Ответитьi set the overclocks in BIOS but am mining in windows, should we then use the AMD software in windows as well?
ОтветитьI had a fit with my 5900x . Used ctr 2.0 in windows to get a base. 1050mv was required to get stable.
Ответить👍👍👍👍👍👍👌👌👌👌
Ответить