Комментарии:
My 660 is 5 MHz too high on FM, sadly, it's too old to support calibration.
ОтветитьYour video is very good and your tips are of extreme interest to everyone in love with TECSUN radios. Thank you and big hug from Brazil 🇧🇷👍😎
ОтветитьI accidentally turned on some strange mode at Tecsun680. The frequency count from 000khz appeared on the screen. I started turning the encoder - the frequency reached 100 kHz. Is this also a correction mode? I was unable to replicate my accidental clicks. I can only say for sure that my receiver does not need correction. It was perfectly tuned at the factory before shipping. No problem! Firmware 6620.
Once 4 years ago, the valcoder jammed. The problem was solved in 10 minutes with the help of a micro drop of liquid "WD40" and synthetic oil. Works great.
Майк, благодарю Вас! Нашёл только Ваше видео и решил проблемму смещения на своём PL660! Круто!!!
ОтветитьThanks, it's very useful information
ОтветитьI have a question : is it normal that SSB 's BFO rotated all the way up silent the radio like a squelch? For me is a little glitch .
ОтветитьHow is the battery life with good batteries bough on speaker and headset?
ОтветитьExcellent video!
ОтветитьSW & AM recalibration don’t work on my 660. I push & hold “air” as you instruct & the radio immediately goes to the air frequency. No blinking light.
FM recalibration works just fine on my 660.
what firmware needs ?
ОтветитьThe calibration works also in SSB mode ?
ОтветитьBrilliant ! You just saved me sending back a newly received PL660 - THANKYOU !
ОтветитьWhat is the width of filters in SSB narrow/wide for Tecsun pl660? Firmware 6622
ОтветитьСпасибо, это очень полезная информация. Некоторые знакомые разбирали приёмник и крутили отвёрткой... это было глупо)) Благодарю что научили!👍🤝
Ответить😀👍
ОтветитьI have a Sangean 909X2 which is appears to be off calibration, but only on wide bandwidth. It's right on the money in narrow. No calibration method that I'm aware of. I'm wondering if this is normal operation, as it appears that the radio simply offsets the passband when going wider.
ОтветитьIs this radio rechargeable?
ОтветитьThank you so much Mike for sharing this, it saved my PL 660 bargain.
ОтветитьI have a 680 and this works for the FM band. Thank you so so much for making this video.
ОтветитьBrilliant! Thank you!👍🤓
ОтветитьI have owned many radios over the years and never had one where the frequency drifted like just happened on this one. Why does this model have frequencies that drift?
ОтветитьReally excellent video. I just purchased a PL680 where FM was way off and this is solved the problem perfectly. Thank you so much Mike. Gary L
ОтветитьMike, can the Airband be calibrated? Mine is out by .1
ОтветитьThank you, that was very helpful.
ОтветитьI have an older version so it doesn't work with mine. Thank you for the information anyway.
ОтветитьWill this work on a pl-680 too?
ОтветитьI have the same pl660, but I cannot calibrate FM, press sync for many seconds and nothing. If I press air it shows an airplane. Can somebody help me calibrate fm in this pl660? Thanks
ОтветитьMy Tecsun pl-660 will not calibrate like that doing those steps. It's a brand new one. Any idea why?
ОтветитьDo you know if the tecsun pl-600 has this feature?
ОтветитьThank you very much!..My Tecsun 660 FM is now properly calibrated. 5 stars
ОтветитьFinally got my replacement PL-660
( the last one was bad).
So , it came to me, off frequency, so I’m having to come back to this video, to do my new radio.
Again, thanks for the video.
📻🙂
What about offset in airband? My 680 is 4khz offset. Is there a way to calibrate airband? I made some combinations with buttons but nothing.
ОтветитьSuperb video Mike! Works on the 680 too. Thank you so much for taking the time to do this and you explain it SO well!! Great!
Laurie
Very nice! Just recalibrated FM on mine. Thank you.
ОтветитьAwesome tip!! Thanks! Love my PL 660!
Ответить👍 Tks, very interesting video
ОтветитьWorked for yours but not mine. Push and hold the Air button and it stays on Air Band. Mine is off 5. I have one Mfg. Around 2015.
ОтветитьTnx you so much Mike, 73 ! 👍 📻
ОтветитьShould I get a spare antenna for mine? I just received the radio yesterday? Do you think the antenna will last through normal use? How do I prevent the corona ball from falling off?
ОтветитьAh! The world's longest ping pong game. Thanks for info.
Ответить🤔👍
ОтветитьPERFECT!!!
ОтветитьMine does not calibrate. I tried for fm with sync Button, but nothing happens.
ОтветитьUnfortunately, I was not able to calibrate by using this method. To begin with, it is impossible to hold Air and Sync. Pushing them, no change.
Is there any different version?
Thank you, I just recalibrated my PL-680 using your method. I bought it recently and it has a firmware version 215 6622
ОтветитьGreat video.Thanks.Does calibration stay same when radio is turned on/off?
ОтветитьNot sure this works for a 1khz offset. 5001 sounds better than 5000. I put it on 5000, get blinking, go to 5001, hit 1. now 4997 sounds best. it went the wrong way and 3khz vs 1. anyway, I think 5000.5 would be ideal so it doesn't make much difference 5000 or 5001. Still, odd.
ОтветитьThank you for this video!!! 2 years later and its still relevant. Going to verify and re-calibrate if needed.
ОтветитьI have an older PL-660. I bought mine in 2011. It collects dust because I have this exact problem. However, since it's an older version, I cannot do this alignment. If I could i would use the radio, but I never do now, a shame really.
ОтветитьMy Pl-660 which is an earlier model will not respond to holding the air band button down Touch the airband button anyway you like & all that happens is that it switches to airband. However I was able able to calibrate the fm band by pressing & holding the synch button. Does anybody know of a procedure that works with the earlier model for am shortwave calibration?
Ответить