Комментарии:
I got this installed properly and it looked really well as if there was no screen protector at all. The fingerprint scanner works well too.
However, after a couple of days the left and right sides started to lift up and dust and lint started to get in. It's absolutely annoying.
I keep pressing it with the microfibre cloth to see if it'll stick back, but it doesn't.
Any advice?
PLASTIC HOLDER DOESNT FIT LIKE THAT
ОтветитьWhat happens if it cracks? Can you remove it?
ОтветитьFollowed your instructions and it worked great the very first time, though I have to be more careful about putting the jig on a very level surface next time.
Ответитьdear god, so simple this instalation....c'mon!!
ОтветитьDO-NOT buy these screen protectors I have had them on my s22 ultra and in both instances the screen protector was cracked from a laughable amount of force. The first one, I dropped from about 3 ft as I was sliding it into my pocket... you know a drop that wouldn't have actually cracked my normal screen. The second I just put on yesterday and literally cracked within an hour of me having it on because my water bottle fell over on the couch and rolled into my phone with minimal force and chipped the screen, I shit you not that was somehow enough force to break it. I would love to know how this protects your screen for your phone when it literally cracks from anyting, even things that wouldn't have cracked your original screen. You'll be replacing your screen protector every other day. Such a waste of 50 dollars. Also this video should REALLY MOST DEFINITELY iterate that you must have set this up on a completely level table or surface and apparently the entire house. I poured the adhesive on to my phone screen and it literally all ran off because the particular room I was setting it up and has an uneven floor. It literally ran off my screen like olive oil on a Teflon pan. Within one millisecond 90% of my adhesive was wasted.
ОтветитьLOL, there are two glasses in the box and enough liquid for only one application. You might have guessed by now... Whitestone don't sell the liquid only, separately. Soooo, buy the whole pack again! What an utter rip-off... seriously.
ОтветитьWhy is this more expensive than the S23 Ultra one on your website?
ОтветитьYou didn't mention using the weights to thin the glue at the finger print sensor.
ОтветитьI found putting this protector on very fun...I kinda wish I had more phones...I find the uv light to be very handy as I have other uv glues I use for fishing so this light will get more use...I wish it would just stay on but I'll deal with that...but overall what a great product
ОтветитьUpdate
Degraded to the point where it won't even let me scan my prints. Green ring goes about 3/4 around, BOOM error.
Worthless if you want to use the FP scanner.
Also blame the devs for the idiocy of putting the FP scanner in the screen.
If you love a working fingerprint scanner, DO NOT BUY THIS!
There is no "trick" to make it work. You'll be lucky to even be able to rescan your prints.
I can't emphasize enough.
If you want a functional fingerprint scanner
Don't buy this piece of 💩
Mine worked for perhaps a week and now refuses to scan prints.
What's it look like when you take the screen protector off? Does it leave residue and is it hard to get off?
ОтветитьThis is such an amazing channel
Short videos
Quick and good information
I am impressed and lucky to have found your channel, thank you
In my opinion it's too complicated to install.
ОтветитьMy personal experience with this screen protector, it lasted about a week before cracking. It was only in my pockets isolated keys and other hard objects and never dropped so not sure what happened there. Was also not very good with the fingerprint sensor even after reconfirguring it.
Also, the cable that came with the UV fixture was also bad on my unit, so I would recommend having a spare or testing out the lights before getting started.
Will def. be sticking with the cheapo screens
Excellent tutorial
Ответитьjust take the cheaper china uv glass , ITS ALL THE SAME, and too easy to aply without this square! WHItestone make it marketing game !!!!
ОтветитьMake sure the surface your laying the phone on is very flat
ОтветитьBedankt voor deze heldere video. Ik zou het anders geen nieuw protectiescherm kunnen plaatsen hebben.
Helaas heb ik nog wel een vlakje van 1 x 0.5 cm dat niet is 'gekleefd' onderaan het scherm, maar ik kan er mee leven. :-) nogmaals bedankt !
Did it work with UAG Plyo case?
ОтветитьDO NOT BUY THIS PIECE OF GARBAGE!
I read the cheap instructions, then watched this and two other videos on how to install the glass protector, and followed them precisely!!!
I put a level on my table to be certain that the phone was level, dispensed the glue, carefully placed the weight and it was impossible to get the glue to flow and cover the entire screen without bubbles and voids! Started over with the second set and had exactly the same problem with glue not covering the full screen. Even tried first curing thinking it might facilitate moving the glue to cover voids... NOPE! Whatever a messy piece of junk this is. I'd like to send it back to the manufacturer filled with manure!!!
Thanks so much for this video, made the process super easy to follow. All went smoothly (after the first false start - turns out my table wasn't flat. Oops.)
ОтветитьJust got my 256gb one
ОтветитьMy finger print won't work even with touch sensitivity enabled
ОтветитьWell done. Spot on. Followed your directions and perfect install.
ОтветитьI just submitted my two week vacation request so I can install my white stone screen protector
ОтветитьThanks for being so thorough I explained this even better it was a British person thank you
ОтветитьWhy they have 2 protectors?
ОтветитьNot worked for me at all even after watching the video and reading the instructions from the package. I got bubbles on the edges and on the ultrasonic fingerprint sensor. I guess my package came defective or something, and it was a mess... Will try other screen protectors. Asked for a refund already. What a waste of time and money
ОтветитьJust installed mine. Followed instructions to a T but awful big bubbles of glue around sides at the bottom and top! What a waste of money my new phone now looks crap! ☹️
Ответитьway too complicated and there is too much plastic in the kit, not really E friendly, ill stick with the samsung screen protector
Ответить👍 fingerprint is very smooth and fast, and the display quality is unaffected.
👎 installation is very sensitive and the glass is very fragile, I accidentally cracked it with the tip of my finger nail because of an air gap remained at the edge of the glass.
EXCELENT VIDEO CONGRATULATIONS
ОтветитьIm lokking for a screen protector and a case to my s22 ultra is white dome good and case friendly? heard of it arent and glass can crack
Ответитьthat's a lot just to put a screen protector on hahah does the uv light come with this package?
ОтветитьWhere the Hell is this UV lamp of which you are speaking???
ОтветитьThis really ain't worth the hassle I got a panzer glass one and its perfect
ОтветитьI just applied this screen protector on 2 devices and I was shaking so bad I thought the shake alone was going to ruin the installation. I'm happy to say that both turned out perfect! 🥰
ОтветитьCan you remove it easily after ?
Ответитьall this trouble just to install the screen protector?
ОтветитьHi! Your tutorial is so comprehensive! 👍👍👍
Just a quick question. Is it necessary to have this type of screen protector? Or can the normal screen protecter (like for flat display) also work?
Sorry if stupid question. This is my first time owning phone with curved display.
Great video but not showing the fingerprint sensor working? Or tips on how to best register your prints? Come on man!
ОтветитьJust got mine my daughter is going to try both of ours lol
ОтветитьYou say you wish you could send the light back. I wish I could purchase the kit without the light for a lesser cost as I have multiple phones within my family and upgrade often.
ОтветитьThank you for this video.
ОтветитьI installed the screen protector great video. However I'm unable to use the fingerprint scanner now. Do you have any suggestions?
Ответить