Episode 124: Sony Trinitron KV-20FV10 RGB Mod Special

Nice, thanks a ton, instant sub. I have a Sony Trinitron KV-24FV12 and I "think" I can actually follow this guide to a "T". My model does have S-Video, but shouldn't change anything right? Thanks.

No SCART conector?

Hello 👋🏽 question: Can a Sony KV-27FS17 be Rgb modified?

There is no need to mod this, has components input, just buy a scart to component box, and get same quality

where can i get a front port cover for one of these? i dont see much difference with the rgb mod but cool

Hi "Mando"! I'm about to mod a TV Set with the same Y/C Jungle chip. In this KV-21SE80A set, the RGB IN1 is not used, so I´m planning to use that input instead of modify de IN 2 like you did. What do you think? Is a good idea?

si pudiera te llevaria mis crts para que me las dejaras en la smejores condiciones que se pudiera . saludosss

Hey I have Sony trinitron 24fv10 but I want to do a bnc and rgb mux with no toggle switch do you think you can help me with a step by step?

WOW!!!

This whole experience is a masterpiece! This kind of tutorial sets a new level in authencity, orginality & independence!

Why making a switch ? SCART's pin 16 is blanking pin it provide a 5 V for 4:3 and 12 V for 16:9 you can use this feature instead

hey I'm doin this on a almost identical model, KV24FS100 and I'm having trouble identifying the blanking pin anyone got any advise?

Hey do you think you could help me mod my CRT, it's a SONY KV-27S15

Dude, when are you going to come to Brazil to do this on my Sony Wega?
Congratulations for this work!

Hey SegaHolic, Do you know if the JVC 27432 can be modded? I only see one chip on there that has RGB indicators.

why you remove the capacitors and then put it on the cables?

damn it look so beautiful!! there is no better way to play nes and snes games ..

I got a Sony KV-20M20, it"s looks harder to do so.

Dude your work (physical and video production) is great.

I feel like I wanna hack nasa and russian kgb
After watch this

beautiful work! it looks fantastic. How long does it takes you to do the whole thing¿

Is this tv calibrated?

Great video! Is there no need to daisy chain the different ground pins on the scart lead?

Great video! A question: what happens if dust gets into the anode hole after the discharge? I usually put a clean cotton rag into the hole to close it. Is it ok long term?

Brother si aplico todo este procedimiento imaginado que sea la misma tv el mismo chasis todo, a un sistema NEO GEO funcionaría? O es que las salidas de las líneas RGB con las resistencia y capacitadores que pusiste solo funciona para sega?

Brother, una consulta a la salida de los cables de rgb y blancking, le pones unos capacitadores pero como saber qué características debe tener? También veo unas resistencias, imagino que deben ser según la características de tu tv pero de donde saco esas especificaciones?

Una consulta este procedimiento lo puedo aplicar a otra tv sony? Obviamente con sus respectivos materiales. Es una sony KV 29V22M

No tienes uno para NEO GEO?

Man I wish there was someone with your skills in my area of Texas.


I have some consumer sets I’d love to get modded.

Holy shit man. This is by far the most well presented video about rgb modding I have seen. Definantly subscribing now

Well, this fixed my Dunning Kruger effect. I’ll just pay someone to mod my Wega. This is an A++ video

Mi consola de videojuego tiene que tener rgb nativo para que esta tv me muestre esa calidad??

Hola amigo podrías ayudarme para hacer lo mismo con una TV roadstar CTV 1010 xkt . Gracias tengo el datashet

Is there anyway I could contact you to get an estimate on how much it’d cost to add av or rgb to a rf crt tv?

If I needed a 100 ohm resistor in between the blanking and the 5v, on the positive terminal of the bread board. Will I place it in between the blanking line and the 5v? So +blanking/100ohm/5v+ , on the positive Terminal line?

Bro, do you prefer this over the 27" d series you have rgb modded?

Did you use a resistor for the blinking pin ?

on the scart port to the bread board what pin did you use for the ground, common ground?

The amount of style, quality, and passion that you put into this is amazing man. Thank you!

im scared to do this and break it the tv i got a new clean and small

Well done! Looking forward to doing this in the future if possible.

great video!

I've been prepping to RGB mod a Sony KV-32V36. I'm probably in over my head, not with soldering skill but what to solder too. I keep researching and watching vidoes till I'm ready to do it. You planning to sell that breakout box and din port? It would make it way easier for me

This is awesome man, great work. Im trying to wrap my head around modding a Sony KV-XF29M35 which uses the CXA2139S jungle and this gives me some confidence.

one day they will be plenty of rgb modded crt 's 📺 In the wild & yall better give thanks to this man 😉..