Комментарии:
My door seal has just perished so I’m going to change it myself with your help thank you just need to get a New seal from your site 👍
ОтветитьYou are Natural, thanks very much for sharing your skills. Very useful. I really really appreciate it. Thanks very much❤❤❤⭐️⭐️⭐️⭐️⭐️👌
ОтветитьDid it with the help of this video 💪
Had to work around the control panel because I couldn't detach it but it worked.
Thanks!
Why the hell would Samsung make it so difficult just to change the door seal? Ridiculously labour intensive for what should be a 5 minute job. It's almost as if they don't want you to fix anything...
ОтветитьThank you so much for this video everything explained so well. Took me a lot longer to do it, but it was my first time, and I'm feeling quite proud of myself 😁
ОтветитьTwo years later and this video is still great. Just changed the seal with the help of this video. Perfect, thank you!
ОтветитьI followed you step by step, job successfully done, thank you.
ОтветитьI can get the retaining spring back on! 😅
ОтветитьFantastic! Fixed my gasket by following your guide step by step
ОтветитьBrilliant, well explained
ОтветитьBrilliant review really helped us loads thank you 😊
ОтветитьMuchas gracias! Pude hacer el reemplazo por mi cuenta y sin problemas posteriormente 🙌🏽
ОтветитьVery useful video. Thank you.
Quite a few steps for something perishable, as others have commented. But you made following them very simple.
Thanks! Clockwise turning to release!
ОтветитьPerfectly explained 👍 made fitting the new seal straight forward.
Ответитьgreat instruction, the wires are a bit fiddly but got the job done and call out saved, cheers
ОтветитьThank you!!!! 😊😊
ОтветитьThank you very helpful
ОтветитьGreat video well explained and straight forward even my wife could do this 😅
Ответитьthey are not a phillips head they are posidriv, there is a difference……
ОтветитьExcellent video and love your voice
ОтветитьExcellent video - followed it step by step amd was finished in 30 mins. Many thanks - saved me a bundle.
ОтветитьThank you very much for the video. Really good guidance. I replaced the seal effortlessly. I wish every tutorial was as clear as this tutorial!
ОтветитьGreat video!
ОтветитьOur ecobubble machine was a slightly different model but I was still able to use these instructions. Much easier than trying to replace the seal with the front panel still on.
Differences were:
- The control panel wouldn't budge until I reached under it (from the top) and freed all the tabs under it as well as the ones on top. Also had to undo the clips holding the cables in place to all it to be placed on top of the machine . Take note of where these need to fix back on.
- There is a hose which fastens to a pipe at the top pf the seal. This needs to be removed by using pliers (or brute force) to loosen the clip (by pushing the two tabs together) and then slide it up the hose. The pipe on replacement seal was different and I had to decide whether to use that one (it had no ridge to keep it in the hose) or replace it with the original (which can be removed from the old seal). I decided to use the new one, replaced the hose clip and so far have seen no leakage anywhere but I've kept the original part just in case.
- Pay attention to which way the door lock goes on. My machine had no switch to stop you putting it back the wrong way around...
Apart from a small panic when I couldn't free the control panel, this went pretty smoothly. Pay attention to the small details of how the demonstrator does things in the video; especially getting the seal onto the rim and putting on the external clamp. There is a knack to both, but once you have worked it out, it is relatively simple. However, it did take me well over an hour rather than the 15 minutes of the video.
Thanks eSpares!
Following along with a slightly different Samsung model and this was a much tougher job that expected. The inner door clamp was so stubborn and hard to get to I had to cut it off and buy a replacement. Thank you for the video but might be worth mentioning this is not a job for beginners.
ОтветитьWorst machine i ever owned
ОтветитьThe job is quite a bit more involved than I was hoping but the process was perfectly explained by El. Thank you!
ОтветитьWow on the best tutorials I have seen. 🎉🎉🎉🎉🎉
ОтветитьThank you so much, this video saved my life ✌️
ОтветитьDoes the front door spring go round the metal Grove?
ОтветитьWould a faulty rubber seal be the cause of a wobbly inner drum as the bearings seem to be ok?
ОтветитьYou saved my life !
I followed your instructions and replaced it within two hours
Thank you so much for making the video
The seal for my machine as promoted on the platform in the description os £58. However, I managed to find one on ebay gor £23 😊
Job done within an hour
Thanks 😊
this is a great video. very clear. helped me fix a leak in my machine caused by the door seal being loose. Thanks!
ОтветитьGreat video - so clear. I had a few issues getting the inner seal retainer undone. Had to use a 7 mm socket on the screw as didn’t have the angle or strength to unscrew it! Everything else worked perfectly, thank you so much :)
ОтветитьGreat tutorial, thank you.
ОтветитьWell done! The wife will still want for a new washing machine but I can still ask and save some money. Also need to consider if a 7 year old machine is worth it with the cost of the spare part and time to repair. Thank you.
ОтветитьWell explained. Unfortunately the design of the Samsung Eco Bubble is an absolute nightmare. I have watched videos for three other makes of washers and none of them require taking off the front and control unit. The two top front screws in my unit won't come off, even using a power drill, so I can't replace the seal. And the inside metal parts have sharp edges - I cut both my hands trying to follow the video. I will never buy another Samsung appliance!
Ответитьplease make for top loading machine as its not available anywwhere here
ОтветитьStruggling to get the top off after removing the 2 screws, try some force but still the front part of the top not budging? any help
ОтветитьPerfect instructions. Very clear. Thank you :))
ОтветитьSpot on Tutorial. If I was a young man I would want this lady for my wife. Puts a lot of us to shame
ОтветитьThanks my lady. Just a thing : a LOT of cables where preventing me from removing the control panel and the front door. I had to deal with very little space, abd the things getting in my way, without unplugging everything (obviously not meant for). Appart from this: very nice and clear tutorial. Best regards from France
ОтветитьThanks for the help, easy as .
ОтветитьThanks for the clear video instructions. Replaced the seal with ease :)
ОтветитьAbsolutely prefect! Very clearly explained and demonstrated. Helped me do the job with ease. Well done!
ОтветитьSuch a clear and concise presentation. Current TV presenters should watch this lady, they might learn something . Well done and thank you!
ОтветитьVery good instructions managed to put my replacement rubber door seal on without a hitch thank you
ОтветитьThis is the one...spent ages faffing trying to get the new one on without getting the door off like other videos. But this makes it so clear
Ответить