Boot Into ANDROID TV Box Recovery Without The RESET Button - Easy Peasy With Terminal App

Operation not permitted

I get the "No command" error after booting in recovery mode. I have a remote but seems no key combination seem to work (Power+volume up etc) to make boot menu appear. Any ideas? cheers

My box locks up after I type "reboot updare"🤣

Hello friend, hope this will find you in good health.

I have a problem with my X88 pro 10 RK 3188 processor 4GB RAM, 128GB ROM and Android 10 Operating system. Android 10 TV box ("the Device").

It won't boot up. I tried the normal factory reset but after the "X88 Pro 10" logo goes off, it stays with the Black Screen and would not pay further no matter how long I leave it in that state.

Then I tried the Factory Reset via the Recovery (famously known as the "Toothpick Recovery Process". After deleting cache and data reboots Upton only the "X88 Pro 10" logo and then the black screen and nothing further.

I tried with different Power adaptors of the same rating 12V 2Amp with same negative results. Then in addition to the mentioned power adapter, I added more juice with the help of USB 3 data transfer cable by connecting its one end to the USB port of the Device and the end to a Samsung Phone charger with 2.0amp current supplying a total current of 4 Amps. Same result as in the previous two exercises.

Any ideas, I can benefit from enabling the Device to work again!!

Awaiting to hear back from you.

Kindest regards,

Ershad Balosh
++

I have ab HK1 Max tv box and it is stuck in the screen with and message boot on the tv box, what should I do?

So I have a X88 pro S and it is stuck st the logo screen. When I try to reset using the reset button in the AV input on the box it just doesn't power on when I put in the power. If I put in the power alone without holding the reset button it comes on but remains stuck at the logo screen. I am basically unable to reset using the button and it just isn't moving past the logo screen. I can't use the remote either to power it on or off for that matter. Is there any other way to get the box into recovery or should I just throw it out and get a new one?

What do you do if the reset button is broken and you want to boot from the sd card ??

mine is stuck on a screen saying 4k and wont reset using the reset button. any clue? can i fix it

Is there a way to back up the android box and restore it to another android box?

I don’t have a reset button in my av holeSo I can’t even get into my m8s pro Android version 5.1. How can I fix it? It’s like it’s Frozen and I can’t get in! Help!!! JJDeHoyos

Hello sir i bought mxq pro 5g 3 days ago now it is stuck on android logo i used the toothpick method but still it stucks on android logo please help me or my money will be wasted

I have a T95Q Android box. I set it to factory settings for the menu. But now it just switches on and lights up with no picture on the TV. A box comes on for TV for the hdmi. It's not starting up. I've tried everything Inc the reset button and holding reset whilst disconnecting power and reconnecting. But still nothing. Could the software be wiped completely? Could it be the hdmi lead. I'm lost on this. Please help

Great awesome video!
This most definitely worked for my old K III box. I haven't used it in a very long time since I bought my Zoomtak Upro. I wanted to put kodi 19.3 on it but I couldn't get it to the settings at freakin all kept kicking me out. So this worked thanks..

Then someone tell me why I just stay easy and loop mode and it won't come out of it

how to root android tv box

Why not just use adb reboot recovery? That requires no root and no app installation
Or Fast Reboot, a Play Store app that reboots using root

Android came from Linux so let's use terminal. Thanks! You save me a lot of work.

i have MXQ PRO 4k 5G box with 2gb ram and 16gb memory. it was working good but sudden it stuck on blue light and android boot screen only. i tried to do hard reset but seems that reset button which is available inside AV slot is also not working. i have downloaded latest firmware and uploaded the same on my sd card with Burn Card Maker and then i tried to upgrade firmware with sd card after connecting my sd card into USB card reader and then to MXQ Box. but still it shows only android on screen and blue light in box. Any advise or suggestion please....????????? its Rockchip RK3066 . please help me.
also my box do not connect to Laptop (window 10) i think this is due to reset pin not working.

MXQ project does this work for Amlogic MXIII 4K S802 2G ?
Will this procedure work for android tv box not turning on but the led lights red/blue and charger work, and giving no signal on HDMI, AV, Component Source ? Please help

my mxq 4k pro is pretty shot i hope this method works for me my box Wi-Fi was not working so i flashed a rom called Aidans rom and now it freezes on the android tv logo screen and will not boot into recovery hell my computer will no longer even read it either

I keep getting frozen on boot screen, Even with av port method.

Trying to do the hard reset on mine as after a power cut the box will not boot past the logo page. Pressed the reset button within the AV port but when the menu comes up I cannot select the factory reset button as I don't have a remote I use a wireless mouse!! Any idea?

how do i get program on box if box wont boot?

How in hell can you install recovery software on a box if the damn box won't boot up ?
Stupid advice.

Hlo sir please 🙏reply my mcq 4k is Google Play services is not working after I reset it I think it didn't installed in system app . I want know that which version of Google play services is compatible sir please help me in this problem

Hello, thanks man. The toothpick method didn't work for me, therefore I used your method.

Bro can it boot from a usb device in the recovery mode??

hi my tv box mxqpro 4k blinks the blue light n doesnt switch on... what can seam to be the problem

This is great if you ACTUALY HAVE ACCESS TO YOUR BOX. FRIGGIN CLICK BAIT VIDEO.

Give for S905d

rubbish

its bloody bricked , hello!!!

Hi Sir, just want to ask. I have the MXQ pro android box and whenever Im turning it on, it directs me to the android recovery screen with options like reboot system now, reboot to bootloader, etc. Why its not automatically directing to its interface? Any suggestion? Thank you!

what can i do if reset is faild to mount

Plz help sir i have Bqeel Y4 Max and when i try to plug it to my pc and run Amlogic USB tool it doesn't notice the device i installed the drivers multiple times i plugged my other Amlogic tv box and noticed it but when i plug this in nothing happens help

Hi, my mxq pro 4k is not turning on. There's no light. Can you help me?

Hi my box tanix tx6 stuck boot mode brand new first time I put it on, can you help I tried pin also USB and sd card but nothing works. It not recognising anything

My box doesn't have a reset button and therefore am unable to get root. I have tried kingroot and others.... Any way to do this so I can install atvxperience?

I have nexbox A1 with messed up root access. It does not respond to su commands. It cannot boot into recovery mode with pin method as well. It is not recognized by usb burning tool. How should i flash new rom in it

hi i hope you can help me ive got an mx10 pro 6k was working fine and then it got stuck on mx10 pro screen ive tried reseting it by av and doesnt do anything if i put the power cable in it just comes up mx10 pro if i try reseting it it doesnt come on at all any ideas?

I have a Cubetek 4k android box. Once during the hard reset, the power
cut was interrupted due to which it was not fully reset. Then when the
power is turned on, only the Android box logo is visible.
There is no process even after turning on the power by pressing the hidden button.
kindly help me.

My android tv box MXQ-4K stopped power on & there is no LEd indication but I am able to upgrade android box using usb and laptop, Can you please help how to fix this issue of power on. please guide.

flash OTT TV BOX SMART PRO IPTV

201_3GB:/ $ su
201_3GB:/ # rebot

Hello, I don'y know if you could help me. I have a MXQ-4K and I just got stock with the logo from the beggining and I tried to hard reset the devise by pressing the reset button on the AV port but it appears "No command" and I don't know how to fix it. Please let me know what I could do to fix it.

You didn't show us how to reset the box like you say