Stable DDR5-7200 CL34 overclock of a Kingston Fury 6000 CL36 kit.

Got these two kits and one of them is M-die, other is A-die. Now, I cant make them run more than 4800Mt/s without crash and BSOD no matter what I try.

@ActuallyHardcoreOverclocking, I loved your video, very informative.
I followed it to the T and got no errors when testing but after about a month or so some games randomly crashed while gaming, while others didn't.
Going back to the XMP profile 1 at 6000Mhz seems to have fixed the crashing issue so it was probably memory related.
I didn't clock it at 7200 like you, but 6800Mhz, maybe im unlucky or did something wrong.

What kind of settings would you recommend for the same type of kingston memory, just cl40 instead of cl36?
intel 13600k, MSI pro z790-A wifi, KF560C40BBK2-32.

Thanks a lot

BZ You are the man! You have no idea how tremendously this video helped me! My MSI Z790 Tomahawks can only do 6800 y-cruncher VST, but I was wasting my time bottoming the timings, running low subtimings on 6800c32 that required the DIMMs to be under 48c to pass, eh screw that.

Eh well screw that! I'm now running CL34 with exactly the same subtimings as used in this video, besides tRFC/tREFI that I loosened up a bit, and now I can pass 24hours+ of HCI without a fan over the RAM! It reaches 62-63c stress testing but still passes, bloody awesome. I'll check later if I can also pass with tRFC 333 and tREFI 50000 as well since I have an M-Die kit.

The PLL voltages are a life saver, they work! I have MSI Z790 Tomahawk paired with 5600c46 (A-Die) and I simply couldn't get y-cruncher VST stable last 6800MT/s, it would within the minute or two. I used the same CPU, RING, SA & MC PLL voltages and I'm now stable half an hour and still going on 7000MT/s running y-cruncher VST.
How do people manage the find PLL voltages, is it simply trial and error each time?
I will try 7200 next up and update.

This honestly seemed was too easy. M-die is supposed to be hard to get to 6800+ 😅

Thanks, BZ

Graet video, really explains alot! Would like any help i can get with 2x32gb g.skill hynix m-die 6400 32-39-39-102 kit on a msi tomahawk with 13900ks. What values i need to change from your setup to make it run at 7200?

awesome video, thank you for taking the extra time to explain timings, the video thus became a very good resource for reference!

Please make Kingston Fury 6000 CL36 kit overclocking on X670E chipset

what about
Kingston Fury 64GB (4X32) DDR5 6000 CL 36 memory in a (Z790-E Asus)
so far work stable with 1.3v and 4800mhz
but, Whats the point to buy a motherboard that in theory "support 128GB" but 6000Mhz is too much for T_T

thanks to this tutorial videos i manage to work brand new computer with gigabyte Z790 gaming X and 13600KF. cpu no problem but memory kit Kingston renegade 6400 cl32 xmp was nightmare. latest bios. but stock settings and xmp enabled ended in bootloop. then i set vccsa 1.35V , later lowered to 1.3V and mirracles happens..all work. later i set 1T . works for weeks now. no other Voltage adjusted . even 13600K goes to 5.2 and 4.1 with bios max.perf setting. i tried manual 5,4 and 4.2, no voltage adjusted, works perfect. big thanks to this tutorials and clear explain.
p.s. my mem score in some memtest is 97gigs, cant go over 100... not verry happy but it is as it is , and latency is 70ns... i think little bit higher than usual...

hey BZ I changed my mobo from z790 Aorus master to an MSI Ace z790, I used to run tighter timings with the gigabyte board that arent working on the ACE, you think is mobo quality or voltage differences? thanks!

A friend of mine has both the Z690 and Z790 and was wasting his time trying to reduce to tCL to 32, bring foolishly fixated on his primary timings, meanwhile completely neglecting his subtimings on Auto. I told him he's fiddling with poop! Tuned his subtimings similar to yours and he was shocked his Geekbench score went up by 2k points. I think a lot of people are stuck with the DDR4 mind set where going from CL15 to CL14 has some impact, and gong from CL14 to CL13 is some exotic rare overclock. More people need to watch Buildzoid's video on tCL speed doesn't matter on DDR5.

Any suggestions for the asus maximus hero with i9 12900k and 4x16 ram ddr 5 6000mhz kingston fury? i tested all the settings of all your videos and it can't post or if it does post then i get the blue screen on windows... thanks.

Unfortunately these kits don’t work the same way on z790 aorus elite ax. Lower timings - you are welcome, higher bandwidth - who are you?

Best video so far you’ve made!

I would love to have your Insight on the new corsair vengeance 4x16gb 6600mhz 32-39-39-76. I just got them in the day before yesterday and it says they were made in week 14 of 2023, literally last week but xmp doesn't work I got it to run at 6600 MHz by loosening Cas latency to 34 and adding .01 voltage and I was able to pass memtest 86 but with them being an actual 4 dimm kit I expected xmp not to give me any problems I have a 13900k on a MSI z690 carbon also for some reason my motherboard defaults two quad rank even if I only have two sticks in idk why or how to change my motherboard isn't even supposed to be capable

Could you please tell me if it’s viable to enable pbo with the non x 7700 cpu i cant find anything about it 😢

My friend, thank you for sharing everytime

If i can suggest to you a simple command, with cmd or a shortcut or a bat

shutdown /r /fw /f /t 0

This will reboot itself in UEFI Bios if is supported without smashing any key xD

Greetings from Italy ❤

I wish there were more guides for both DDR5 and DDR 4 on AMD for getting decent clock speeds with 4 double sided dual rank sticks. For example on my 5800x build, I can't get speeds above ddr4 3600 to boot. I ended up tightening timings at 3600 after even 3666 wouldn't boot.

These clocks are impossible on Ryzen?

On Windows 10 TM5 gets put into e cores and it actually skips tests for some reason and casues it to report errors in the "idle" period between cycles and makes it completely unreliable.

❤

I'm not able to find PLL voltages on my Asus z790, is it called something else?

Does VCCSA not do anything for the IMC anymore?

Buildzoid can you please figure out a way to use 128GB DDR5 on Asus extreme x670e with 7950x3d?

Intel Memory Controllers Existential Crisis - Is A One A Zero Or Not

I had to walk a not insignificant distance to rewind and make sure I heard that right. Future video Title perhaps.

Stable is such a relative term on an OC like this. Sure it might be stable your on MOBO/system, might not be on another. Might look stable to you but crash out everytime at very specific work load that you haven't tested.

Sounds cool though! Wish AMD could get their memory controller act together.

Too bad we can't do that on AM5. Infinity fabric? More like "Finite" fabric. 😂
Also I wonder, if AMD claims their next gen CPUs will be compatible with AM5 mobo, what's the point of that if AM5 already taps out at 6000MHz max?!

any similar guide for 12700k & z690? Running my 5600 kingston fury at 6400 cl30 with 61nc latency atm.

Happy Christmas!!!

The z790 Asus motherboards have the lga1200 mounting holes for the cooler and the lga1700 also, is there any difference (in terms of mounting pressure stability) if i use the lga1200 bracket instead of the lga1700?

Can you do a detailed Bios settings video with the 790 Edge? I have the i9 13900ks, GeForce 4090 25GB GPU, Kingston Fury 5600 16x2, 1200 Thermaltake power, 360 Thermaltake water cooler, I'm having crashs at start up of Battlefield 4042 game. if I turn the CPU down to 5GHZ it runs fine and its stable.

I bought this kit because you recommended it. Couldn't get it to overclock with stability. Tried some suggestions in your video and a quick test at 6800 and 56ns latency seems good. Thanks for spreading your knowledge.

Thanks for sharing your results 👍

I OCed dual rank to 7200C31-44-38-38-28 on 13900K z690 dark kingpin on VDD 1.46-1.48V VDDQ 1.26 I think. I was using G.skill 64GB Hynix A-die

Can you redo DDR4 BDie for comparison in 2023?

Are these Hynix A Die?

I see that as of a couple of weeks ago, Kingston sells 5600 and 6000 mt/s 2x16GB kits with CL40 timing in the US. Is it a safe bet that they're still Hynix? If so it's probably the cheapest new option so far at under US$90 at newegg for the 5600 kit

holy batman margins! 😮

1st

second

first viewer

first.

BTW I did try DDR5-7400 and it crashes Y-cruncher. I also tried a tighten some of timings a bit more and that also didn't work.