Комментарии:
Why is my Ender 3 pro so different?
ОтветитьI printed and installed a dual drawer for my ender,but my y axis wheel(under the bed) bumped into the surface of drawer when printing….I can’t figure out the reason?Is the file wrong?
ОтветитьI'm currently running some of these mods in the same green. thanks for this video!!
ОтветитьReally like the green on these wonderful mods
ОтветитьCan someone help me I printed the tool box installed it and now a wheel screw under my bed hits the top of the box
Can the screw be shortened or moved up?
Very good job
ОтветитьNeat ideas but I'm going a different route on all the designs. Glad you had fun, that is what it is about.
Ответить👍👍👍
ОтветитьNo bright green cable clips?
ОтветитьA lot of things pissed me off on this video, 1. you don't need dampening feet when every printer EVER is designed to have a leveled base with padding to ensure little to no movement from vibration. Also, make sure the wires at the back of the printer aren't under the base which is a common cause of rocking 2. you don't need your grubby little fingers getting all handsy with the LCD, have your hand somewhat flat on your desk, put your thumb on the SURFACE of the switch, apply minimum pressure, and turn as you would for a joystick, click as needed, reapplying thumb is not needed, as you'd be gliding with the switch. 3. if you're a normal human being who knows compactness is a must when it comes to organizing your tools and parts, the drawer is inconsistent with that, you'll have a multitude of space either unused or useless, meaning you'll have wasted printed material, extra space that can lead to cluttered area, and lack of space to put tools and larger parts. 4. A shield for the belt is a good idea, but there is a multitude of other models that can be snapped on instead of having to unscrew and attach your tension belt rotor. 5. your fan silencer is completely useless if you have the middle part uncovered, this fan model is unfunctional either way, because it barely dampens any noise, and changes the frequency of the fan noise. 6. you didn't need to make an extra drawer for your tools, you could've at least made a better effort to organize your tools so they're easily accessible, you also didn't account for you could've been able to use that dual drawer for the other pieces of your extruders, springs, and clips to put in there since there was extra space and could've been more manageable if you'd considered organizing in the first place. 7. the placement of the scraper is obstructive to the extruder head and can lead to cataclysmic effects on your printer and prints. 8. your grip to hold the top of your printer? that is the most asinine thing in this video, this can lead to the warping of your printer's support beams, probable disassembly, and destruction of the printer because you're not supposed to hold/hang it from there. 9. your ring around your extruder has an actual usage, but you disregarded the effort to put in why it is useful, (for anyone reading this, its to provide better cooling and ventilation when printing, this can be very risky depending on what material its made of, and what temperature you're printing at) 10. your filament guide is somewhat completely useless because your spool does NOT lock or tighten when it is being fed into your extruder or feeder. 11. adding "accessories/upgrades" to the feeder is very bad and can cause damage to the feeder. 12. the bed handle is an okay idea, but the handle could be better made and placed. 13. a knob cover? really? the original knob has indents and gripping parts that do not require an extra piece to do its job twice. To sum this up, add subtitles to each clip so that each upgrade makes sense and has actual meaning, instead of making rare bubbles of text that are just time stamps or names that describe nothing.
ОтветитьThe power supply silencer is not supposed to be oriented to blow into the intake. This is how you kill a PSU.
ОтветитьHoly crap! What are your print speeds? I must be printing in turtle mode. My drawer took 4 and half hours at 100 speed
ОтветитьThanks 😊
Ответитьwhys everything so dark lol
ОтветитьHello. Very satisfying printing. I bought Ender 3 pro and i decided to use some of these upgrades. 🌞
ОтветитьWhere do I find these mod download
ОтветитьThe time lapse scenes are sick. Well done
ОтветитьI know you don't care and will never read this, but the music in this video is so terrible. Please consider this.
ОтветитьHey i recently got the ender-3 Pro, and whenever i try printing something, it starts from the side and then messes everything up, it does print properly.
but when i print the project they gave (the one in the sd card from shiping) it print properly.
Can you please tell me why this is happening?
Thanks
Amazing work😮
ОтветитьI see your knob cover wasn’t tight either! A bit of double sided tape fixed that.
ОтветитьLink for filament?
ОтветитьHello I have a question these upgrades are also compatible with the printer
ENDER 3 MAX ???
is this a projector?
ОтветитьThese types of videos while having good music are virtually worthless when it comes to imparting information. If I want to listen to music, I will go to a music channel. This video and all like it get big fat thumbs down!
Ответитьyou put the base plate under the LCD in backwards
ОтветитьWhen you upgrade your starter weapon
ОтветитьWhere'd you get that screwdriver from?
ОтветитьTo dark, but good.
ОтветитьI just got the AnyCubic Vyper and it has ALL THISand MORE!!! STOCK out of the box!!
ОтветитьI printed 5 handles and everyone had issues until I did it with supports then I was sanding the 5th one and it broke the 6th one I made tonight really THREW my bed way off and I can NOT get it balanced now!! Any help???
ОтветитьNice Video it's PETG or PLA?
ОтветитьSo what.😂
ОтветитьCool stuff guys,which upgrades your Ender.
Ответитьскажи а вотети модели безплатные с на сайте сигиверс они уже размеры готовые ненадо самому выставлять с уважением
ОтветитьThis is a shit ton effort to make this video for absolutely nothing there are already hundreds of videos exactly the same that will provide you the absolute fullest amount of crap that this will provide.
Only upgrade would is absolutely necessary for your particular work and machine.
There is absolutely no reason to upgrade the machine whatsoever unless you notice that there is a problem
Hey all do you have the files for for all these upgrades feel as if the main machine should come with all these included love the storage ideas
ОтветитьWow
ОтветитьWhat slicing software were you using and what settings were you using?
ОтветитьThat filament guide isn't good. Friction will make it so it's uneven. Ball bearing devices are much smoother.
Ответить"Hey, I bought a 3D printer!"
"Cool. What do you print with it?"
"Mods for my 3D printer. Duh."
What brand and exact color green is that?
Ответитьwhats the screw driver set you use to undo all the screws?
ОтветитьWhen I printed my filament guide, the bearing was not spinning freely. My gears seem to be stuck together. 🤔 any suggestions how to make them spin freely? My printer prints the base to snap off but I see you didn’t have that. Could that be my issue? I’d appreciate the help. This is my 3rd day out here idk... idk.. (lil Uzi voice)
Ответитьthe damping feet are good for silencing vibrations, but you should definately still square up your 3D printers frame :P
ОтветитьThe only one of these mods I think is NOT gimmicky is the air cooling fan, that could definitely help. But save your filament, and buy real upgrades like different bed surfaces or direct drive extruder
ОтветитьWhat filament is this?
Ответитьотвод тепла не в ту сторону, надо вправо чтобы теплый воздух обратно не всасывался
Ответить