How to Clean Piston Rings Or Oil control rings after head Gasket failure / CCV Failure On Any Car

How to Clean Piston Rings Or Oil control rings after head Gasket failure / CCV Failure On Any Car

BMW Doctor

5 лет назад

136,374 Просмотров

Ссылки и html тэги не поддерживаются


Комментарии:

@The_Seraphim7
@The_Seraphim7 - 05.10.2022 22:19

Any chance this will work on a vw 1.8 tsi with clogged oil scrapper rings ??

Ответить
@jonbacon8924
@jonbacon8924 - 11.10.2022 08:14

I’m from California, maybe it’s just me but damn you talk fast as hell.

Ответить
@anthonywhitlock9168
@anthonywhitlock9168 - 31.10.2022 04:06

So my g35 coupe has oil leaking from the spark plug can I do this procedure?

Ответить
@JimMcBob42069
@JimMcBob42069 - 18.11.2022 17:46

Just checking my understanding of coil on plugs here. It IS ok to unplug coils and crank engine even tho ecu is sending what I would guess is a low volt signal to coil to fire. As long as coil has built in ignitor I think is what I have read. I'm not going overheat something in ecu. Is that correct?

Ответить
@cgeromi
@cgeromi - 17.01.2023 10:34

Did you pull the fuel injector relay before expelling the fuel injector cleaner?

Ответить
@nateryan7041
@nateryan7041 - 19.01.2023 03:45

Dose the same procedure work for the n47 2.0ltr engines ??

Ответить
@lelekkozje3049
@lelekkozje3049 - 29.01.2023 00:08

Hello. What, apart from kerosene, could I pour from the top on the pistons to soak the rings because I suspect they are baked. What, apart from kerosene??

Ответить
@AbdullahKhan-bb5yy
@AbdullahKhan-bb5yy - 23.02.2023 02:56

Hello, I’m getting a p0301. Which means misfire in cylinder 1. I changed the spark plug and swapped ignition coil number 1 with 2. I was still getting this misfire. Would this process help

Ответить
@gooorgjooon
@gooorgjooon - 05.03.2023 01:22

My car bmw f10 n52 consumes 1 liter of oil every 2,000 km. Do you think this method will

Ответить
@specops1611
@specops1611 - 15.03.2023 11:28

I know its a old video but, i have the n52b25a engine with the oil ring carbon build up problems. How many times you have to let them soak in the cleaner? Cause I now use 1 liter oil 1800 km or 1118 miles

Ответить
@Luuuugn
@Luuuugn - 16.03.2023 21:46

Thanks! is this procedure to make the engine consume less oil? Like an a4 B8 drinks like 1 liter per 1000km...

Ответить
@allanhmelnitski978
@allanhmelnitski978 - 18.03.2023 17:49

Bloody hell, the lady who´s towel You took will be mad angry!

Ответить
@greengriffin100
@greengriffin100 - 30.03.2023 01:42

Would this solve a low pressure oil light problem on a Kia Soul?

Ответить
@adamnugent2137
@adamnugent2137 - 04.04.2023 06:42

how come you didnt vacuum out as much of the liquid chemical first before you turned the engine over to blast it out?

Ответить
@isrealperez9069
@isrealperez9069 - 17.04.2023 20:23

Was that restore compression so I have a low compression on po303

Ответить
@andrewgomez8807
@andrewgomez8807 - 16.05.2023 02:03

Will this work to get rid of blue smoke coming out of my exhaust? , my bmw runs fine but there’s this blue smoke that comes out which isn’t normal

Ответить
@garyzhang5099
@garyzhang5099 - 28.05.2023 22:21

Well, after I did this to my car I kind regret. Too much risk/effort for zero-small gain, long term effect is unknown yet, but I wouldn’t recommend it especially for the people have v shape engine.
The falling carbon deposit can stuck inside the first and second piston ring, so even you did everything correctly, you still have the risk to scratch your cylinder wall in long run. I get another score only after 10 min of idling, so don’t do this unless it’s you very last option before engine rebuild

Ответить
@HugOCovers
@HugOCovers - 03.07.2023 07:27

We could try to start the car without sparks? We need only to cover the spark wholes. The injector cleaner pass through the rings and mixed with oil Carter? Right?

Ответить
@domchessh4604
@domchessh4604 - 22.07.2023 14:57

thanks fella. i had lost a fair amount of ring compression after doing a head gasket on k series rover. wouldnt start!
followed your advise....& BINGO!! next morning ..bang..pop.. brummm brummm...smoke...smile. all the best to ya.

Ответить
@naturoidz2714
@naturoidz2714 - 23.07.2023 08:53

Good video mate, Do I need to change the oil afterwards?

Ответить
@eczmurat
@eczmurat - 10.08.2023 14:28

hi, any risk of cylinder scoring due to loose carbon deposits between wall and rings?

Ответить
@maulajatt5655
@maulajatt5655 - 14.08.2023 23:36

Does forte seal conditioner not do the same job?

Ответить
@JStateification
@JStateification - 16.09.2023 23:24

Would this be a good idea on an M54? 2003 525i. Not a bad oil situation but just to kinda clean it a bit without removing the head. Also, when you put the cleaner in should you turn it over one time without the plugs before letting it sit to kinda coat the whole chamber? I feel like it would just sit in the bottom part of the cylinder head is my thinking

Ответить
@atomicdmt8763
@atomicdmt8763 - 08.10.2023 01:11

not available (easily) in the US

Ответить
@BasketballAve
@BasketballAve - 28.10.2023 14:12

I heard BMW doctors have the Most Patients. 😉

Ответить
@markcavey7002
@markcavey7002 - 03.11.2023 13:54

Hi great vid i have a audi s5 3.0 supercharger v6 would my engine benefit from this and is it ok to use on my engine thanks mark

Ответить
@suckOnThese3
@suckOnThese3 - 27.11.2023 02:35

God BMW's are such POS's.

Ответить
@sinisakrcmar1312
@sinisakrcmar1312 - 05.12.2023 21:41

Thank you from Croatia

Ответить
@thelostmachine8395
@thelostmachine8395 - 14.12.2023 07:22

Damn that leaked down right past the rings in 12 hours (nothing came out on your towel) Love the bimmers myself but the slant pistons/deck in this instance means it all just drained pass the low side of the piston and cylinder wall. Next time pull the vehicle onto car ramps just on the right side (right side front and rear wheel) that will get the pistons facing more near vertical orientation so the cleaner may drain pass the piston rings evenly all the way around.

Ответить
@acharyajamesoermannspeaker6563
@acharyajamesoermannspeaker6563 - 14.01.2024 00:51

Pouring red Cool Aide into the spark plug holes? No seriously lots of great tips.

Ответить
@djsanse031
@djsanse031 - 27.01.2024 12:50

Hello :)
Can i use any other fuel system cleaner? Such as liqui moly?

Ответить
@djsanse031
@djsanse031 - 27.01.2024 12:59

Do you think it would help with oil consumption?

Ответить
@neeldub53
@neeldub53 - 01.02.2024 08:25

Will this work for diesel engines as well or should i use Redex for diesel engines?

Ответить
@stuartc6811
@stuartc6811 - 15.02.2024 18:00

Great video
Turning car over at 03.00 am hope you’re neighbours
Like you

Ответить
@adrielpupo4116
@adrielpupo4116 - 30.03.2024 03:38

Does this work witj ac delco cylinder cleaner?

Ответить
@oserratos
@oserratos - 10.04.2024 20:26

Why not just adding the mmo to the oil and run it through the whole interval? I mena im sure itll just take. Abit longer but itll fo the smae job right? Thanks in advance

Ответить
@MariaFatima-gy5pq
@MariaFatima-gy5pq - 23.04.2024 09:46

Whats the name of the red fluid u used to clean up the rings.

Ответить
@BlackDesi-nt6pd
@BlackDesi-nt6pd - 29.05.2024 13:01

Please come back
We miss you

Ответить
@Centralflorida22
@Centralflorida22 - 16.06.2024 01:22

The amount of smoke that came out of my 328i filled the street with white smoke for about the length of a football field with berrymans b12. It cleaned my oil sensor so now it's working properly again. Also not burning a drop of oil and no oil burning smell. I couldn't be more happy. I used my tools and a bore scope. I just did a 8 hour soak. Topped off Then rinse flushed out the spark plug holes. The amount of carbon was monstrous. Although the crankcase is in pristine condition meaning this car had normal oil changes before I bought it in March. I couldn't be more happier. Next is ultrasonic cleaning the fuel injectors.

Ответить
@amber300c
@amber300c - 26.06.2024 09:06

Hi there, I have a question. For a straight six the injector cleaner should cover complete ares of the piston. However being a V8, the piston is angled. Does that mean the injector cleaner only covers a portion of the piston? So one said to flood the chamber over a few days and then syringe out the remaining cleaner that hasn't drained down. Was told that it would ensure the pistons are fully soaked. What's your opinion, any advise greatly appreciated. Thank you Sir. Brilliant channel, enjoy watching content 👍✔️

Ответить
@MojoCuba
@MojoCuba - 06.07.2024 19:57

Can you do this just for cylinder 4? In that case would you leave all the sparkplugs out overnight and during cranking next day? Or remove only sparkplug 4 and leave rest in? Thanks!

Ответить
@freedom5032
@freedom5032 - 14.07.2024 20:44

I see why you did it at night. I did it during the day and my neighbors house across the street was engulfed in smoke. 😂

Ответить
@freedom5032
@freedom5032 - 14.07.2024 20:52

Is your car a diesel?

Ответить
@zoltanmolnar8583
@zoltanmolnar8583 - 16.07.2024 22:47

Is diesel injector cleaner better than petrol for this purpose?

Ответить
@ConceitedTooFly
@ConceitedTooFly - 20.07.2024 01:10

Does this work on 2009 BMW 750li?

Ответить
@franruizdiaz6280
@franruizdiaz6280 - 24.07.2024 07:10

Does it work for M57?
Can this procedure be done to a diesel engine?

Ответить
@raimondsgradeckis7195
@raimondsgradeckis7195 - 12.08.2024 16:18

Does it work with diesel M57 ?

Ответить
@sysomyoung7437
@sysomyoung7437 - 18.09.2024 17:52

👍🏽

Ответить
@jurisdanko5549
@jurisdanko5549 - 01.10.2024 13:18

Can I use this method on diesel engine?

Ответить