Комментарии:
Nice information...
ОтветитьDo you know how to calculate the actuator's operating speed? Under loaded and unloaded conditions.
Ответитьwhat set of dynamical equations can be used to determine the vaccum pressure in the chambers?
Ответитьthe music goes hard
ОтветитьThank you so much
ОтветитьThank you sir 😊😊
ОтветитьNice
ОтветитьWhy oil should go through a check valve only, when return (meter-in), needle valve installed in parallel and it is open as well?
Ответитьtq sir
Ответитьvery bad demonstrations no need writing onvideo
ОтветитьHello, i have a cilinder with a simulair movement. When the cilinder is max in and I steer the cilinder out, the first movement is really fast and uncontrolled, after the first steering, it is normal speed how i set with the orifice. Is this the case because of the vacuum/cavitation?
ОтветитьKavit Kadu
TYME
Vinod Habale TYME
Ответитьı wish we could see the pressure while retracting and extending between relief valfe and pump
ОтветитьWould you have a video that explains end cushioning ?
Ответитьwhat if you put a spring on the load to keep it against the cylinder?
ОтветитьDear Sir............Example Problem I have a single acting hydraulic cylinder with a stroke of 300 mm, a bore of 18 mm and a rod of 10 mm if the press weight is 10 mm on the Piston Head what is the pressure.....Please explain the calculations
ОтветитьWhat is opposing load and running away load
ОтветитьVery helpful for video.
ОтветитьGreat vedio🇧🇩🇧🇩
Ответитьplease upload video hydraulic pressure intensifier animation
ОтветитьSir I want to learn difference between external piloting and internal piloting how to work and what is benefir.
ОтветитьWhat is the difference between fixed displacement pump and variable displacement pump?
ОтветитьThink you too much my favourite teacher's
ОтветитьSir, you mentioned on metering out in both directions would cause a significant increase in pressure on the rod end. What it not be better to meter out the bottom end and meter in the rod end? Thank you for any information.
ОтветитьGreat video.Understood everything you said.
ОтветитьThe relief valve does not function?
ОтветитьIs this open loop or closed loop system?
ОтветитьWhat software is being used in these videos? The videos are very well made 👌
ОтветитьThat meter out and in is that the turtle and rabbit sign on the panel?
ОтветитьHi, I need some information to connect an electro-hydraulic distributor
ОтветитьHindi language
Ответитьthanx for these videos :) can you please make video on electrohydraulics and electro pneumatics?
ОтветитьThanks for making this topic simple with animation. Really loved the way you explained.
ОтветитьThanks...
I felt very easy after refering to this video....
Very interesting!
ОтветитьGreat video! Thanks!
ОтветитьExcellent video, thank you for making this. On a flow control spec that i've found it shows a one directional arrow after the orifice (not 45 deg across as shown in video) perpendicular to the flow path. What is that representing?
ОтветитьSir my telescopic crane boom is jerking when we getting it out or in.
its smoothly coming out about 4mtters after that its start jerking (jumping).
same issue in tele1 & tele2.
need ur help plzz
Sir my telescopic crane boom is jerking when we getting it out or in.
its smoothly coming out about 4mtters after that its start jerking (jumping).
same issue in tele1 & tele2.
need ur help plaza.
can you please tell me if my Marine hydraulic crane traverse motor or slewing motor runs jerky when traversing what might be the problem with this?
ОтветитьCan I have the program or demo to try which you use to create and simulate your hydraulic diagrams ?
Ответить