Комментарии:
Didn’t help whatsoever just wanted my time
ОтветитьSo you need the Rac cord to record to your computer
ОтветитьExcellent info!! Thank you!!! 🐕
ОтветитьHow do you control the volume? I have problems with inconsistency from usb inputs with my analog inputs… My main volume is the only way
ОтветитьDang , the problem I’m having is I have the 2 tr/usb RCA output going to my headphone amp.
But it stopped working and I don’t know what I pressed
This was incredibly helpful, thanks :)
ОтветитьCan you run the cable from the HEADPHONE OUT of your computer into channels 5/6, set your Audacity output to computer speakers, then play a track in Audacity and overdub it?
ОтветитьBrazil, Rio de Janeiro... Thanks.
Ответитьdo I need a sound card to connect the mixer to my computer?
Ответитьas others have found, I had a basic misunderstanding of where the two track input could be routed to on this mixer - thanks for explaining it so clearly
ОтветитьWhat could be the reason that my phone connected via line in 5 does not send via USB into my DAW?
ОтветитьI dont have a band ,im making only dance music,i bought this thing but i also have a focusrite and 2 other behringer interfaces,i bought this thing cause of the compressors and the eq,maybe in future for partys
ОтветитьI looked all over for a couple days after buying the x1222USB and could not figure out how to mix the CD music input. I was using the analogue jacks with no luck like you did. The manual is as clear as mud on this topic and other videos don't cover it. Your video explained it simply which jack to use. Why doesn't the company "Draw you a Map" of something so many want to do? Thanks so much for taking the time to cover this.
Ответитьquestion...when you press button to send aux to main, does it cut out any sound from the mixer board?
ОтветитьI'm using the Xenyx 802 model and I'm not able to hear the microphone over the headphones, while the 2-track to control room is switched on. I'm using the 2-track RCA input to bring the audio into the mixer. I don't want it to be in the main mix. However, I need it to be heard in the headphones. The problem is that I cannot hear the 2-track AND the microphone at the same time. Is this normal? Is there a workaround?
ОтветитьPlz share q1204i use shure mic dynamic..its not connected with behringer xenyx q1204..and I don't know how to connect it with laptop
ОтветитьFor those who own this mixer, are the connectors Neutrik or off branded? Just asking as i have had several wear outs of non-Neutrik connectors
ОтветитьSo that built in RCA connection seems like it's really just for a quick hook up scenario where you need something just to play in a live setting for people to hear.
ОтветитьHi,I bought the same mixed new and I have noticed the green indicator near to tap is blinking,but I can't see it in your video.Could you please help me
ОтветитьHi bro, hopefully you'll get round to answering this? How would you recommend connecting a record player to this mixer? I've already connected my dj controller to a channel but my controller is only an entry level reloop touch and has no extra inputs (hence bypassing through the mixer before I connect to my powered speakers).. I've got some nice retro vinyl that I'd like to one drop during my set. Cheers Paul 😕
ОтветитьThank you so much to your video ! 🙏 It help me so much !!! It's clear and well explain, whereas I come from France and i'm not too good in english 😅 Thank you !
ОтветитьWhere/how to connect 2 synths and a drum machine, only 2 stereo channels?
ОтветитьWhy the sound was distort at some pitch😔.
Ответить👍👍👍
ОтветитьHi Tony, I have a question about the X1204USB. If I use the RCA aux in, I don"t get that sound in the headphone. I tried any combination of buttons next to the phone volume knob. Do you know if I shoud hear the aux in or not? Maby still a wrong setting or so?
ОтветитьYou answered my question. Thank you!!!!!!!!!
ОтветитьHello Tony - I hope you can help, I'm so confused. My problem is that all the surrounded 7.1 speakers are connected to AVR255/Receiver to play the songs vs. your speakers are directly connected to the mixer, then you can connect a phone, CD, video to Input #5. If you don't mind, I can send you the rear picture of my Harman/Kardon AVR255. Thanks!
ОтветитьHelpful demo. Having actual demo with meters and video of the setup is SO much better than a talking head. Thanks!
ОтветитьCan i use my qx1222 as an audio interface In place of my M Audio M Track 2? In short use it with my DAW etc? If so how do I connect it? It’s USB and my PC recognizes it but no sound comes through the mixer.. thanks
ОтветитьVery good tutorial 👌 may I know if the other connection that you made is it possible to connect to a phones slot with my karaoke machine as my source of music ?karaoke machine comes with built in mic and speaker source already. The white and red on top right I connected to my android phone as my recorder and the left red white I connect it on my karaoke machine phones slot, it works but the sound quality was not that really good. Maybe I can try the other option that you did on the other line just you did. Hope you get my point .thanks
Ответитьhow do you connect a home theater receiver to the mixer when main output is used/
ОтветитьRCA is the name
ОтветитьThis board has so much functionality. I love the board. Learning to use it is hard. I've had this board for two years and decided I wanted to tackle learning how to send audio to the mixer and thought I could use the track/USB. Now I know that's wrong. Thank you!
ОтветитьThanks Tony! This helped a TON!!!!
ОтветитьThank you very much. I've been trying for 2 hours.. I dont hear any sound. I had temporarily output the mixer from the track out. No record, no sound. I would be crazy. In the user manual, it says track out and main out parallel. But they did not write that every audio output is not from track out. :((((
I am very I know I'm a novice. But I never imagined that I would have so much trouble with this tiny mixer.(Driver, out, in, record to computer....) QX1002USB
Good subject - but dude - you are contradictive - think about it
Ответитьhello you have to place the cable in line in 5/6 the sound will be better for recording with xlr microphone 😉
ОтветитьI wanna use an interface and subsequent computer to capture and playback whats going thru my mixer, since I can do the remaining mixing in the box. So, would it be a good idea to connect the 2-track in/out of the mixer into a 2ch. in/out of an interface?
ОтветитьHow do I connect an equalizer to this mixer and have the output equalized to the Main Out? Could I connect the Main Out to the equalizer and at the same time connect the equalizer to the two Track-In?
ОтветитьWhat tipe of usb cable should I use, because the computer is not recognize the input.?
ОтветитьHi Tony, i got Behringer QX1002USB, what you think is the problem why all my audio output from mixer to android phone are distorted, even if i'm setting it to the minimum (from gain to mic level).
thanks
Hi again Tony, i have another question, is there a possibility, i can hear the call from my phone or the backing track from my karaoke app from my phone like Wesing or StarMaker app, and i can sing while connected to this mixer? Can you teach me how, before i buy this...Thanks
ОтветитьHi Tony, i have a question, using that mixer model. Is it possible that you play song from a software ex. track1 and in track 2 your voice will be recorded. and at the same time you can hear it in your headphone with effects/reverb and no latency?
Thank you in advance.
Thanks
its a disappointment but u helped me i guess i gotta buy a new cable
nice explenation
I want to connect my zoom recorder and record a comedy show with stage mic and audience mics connected to the mixer channels. I can’t figure out which outputs to use for the zoom and I’m still confused after watching 😅 I ordered an rca cable but the hook ups don’t seem to fit in the red and while hookups and are lose
ОтветитьI would like to ask if I can connect Qx1204 to iphone and record videos?
ОтветитьI plug mi phone to the rca input. How can I do to send that signal to the rca output?
ОтветитьVery helpful in my search for a mixer and the channels I need. Thanks!!
Ответить