Комментарии:
If anyone is curious.....The pH of Aquafina ranges from 5.8-6.4. My source is my $190 Blue Labs PH Pen.
I grow large amounts of "medical tomatoes". My Ph needs to be 6.6-6.8. I have Michigan well water (very hard water, loaded with calcium magnesium manganese zinc copper etc....that averages 7.25 ph. I mix them at 50/50 i get a perfect 6.6-8 ph.
It’s a water heater, no need to heat hot water .
ОтветитьNext Test for Chemicals in the water !
ОтветитьTDS level is BS the best water in earth will have the highest TDS since is full of minerals there your body needs.
ОтветитьDepending where you are at Niagara bottles Aquafina and Dasani
ОтветитьOmg almost all bottled waters contain fluoride wtf
ОтветитьWhy does distilled water from my distiller have 15 PPM TDS reading and purified water that we buy has 0 PPM?
ОтветитьDUDE YOU TALK TO MUCH
ОтветитьPCBs and Benzin won't show up on dissolved solids. Dissolved solids is just the conductivity of the water
ОтветитьOk so what’s the best / highest quality bottled water to buy for the money ?
ОтветитьHello!!!!!!! Your Brita does not work!!!!!!!
ОтветитьFlorida is not healthy 😅
ОтветитьThis isn't super helpful unless you're testing your own distilled water. Minerals will show up in well/natural sources of water snd they healthy for the average person to drink. You really wanna focus on pH and making sure there aren't contaminants like fluoride and chlorine, as in city water. Those can make you sick, esp if you drink tons of that water. Typically the things added to bottled water are (unless it's "nursery water", which adds flouride) minerals that are electrolytes so they actually help your body hold onto the water and those are the things that help reduce water poisoning, which is when you drink too much water and drown out your natural electrolytes so your body can't process it and it can kill you. So look at ingredients in your bottled water. Most people don't like Dasani, for example, because they add potassium and sodium... these are electrolytes. So it might not be your favorite tasting, as sodium is obviously salty tasting, but it would be a good type of water to drink if you were outside at a festival or event where you're sweating a lot and drinking a lot of water, as it would help your body make the most of the water you're drinking. As long as you don't have renal problems. Then those minerals can build up too much because your kidneys can't process them. But even then, if you're out and grab a Dasani (or other water with certain minerals), just one bottle isn't going to have enough to hurt you. The levels aren't as high as things like sports drinks.
ОтветитьThank you very much for conducting this test I was wondering the Niagara water which was very low parts per million was that good or bad based on a scale because I’ve seen some other videos that your videos very important Cuz you sampled size so many different brands and also even tapwater but I was just wondering was that not good because other videos indicated not safe to drink what are your thoughts
ОтветитьMy plumber that replaced the membrane and the 3 filters for an inline osmosis drinking water tap faucet, said once it tests over 40, the filters should be replaced.
Clearly seeing Nestle is not a good drinking water.
They sell testers at my local swapmeet for $1
ОтветитьI love wooter
ОтветитьYou need some minerals / salts in water if you need to drink a lot (you can drink too much) and dont otherwise supplement them. There are some states in North America that for decades have been putting as much as 4,000ppm of Fluoride in water! That is so toxic to you brain it’s literally mind blowing
ОтветитьA non scientist trying pitifully to do science. For accurate readings your electrodes should be CLEANED and DRIED before putting it in another water sample. All you did was contaminate your next water source with the water before it.
ОтветитьAnd? So? conclusion is?
ОтветитьIs it pH Test capable ?
Ответитьmy tap water iis 043 is that good
ОтветитьHi, My tap water is 440, Aquazana 340, and Aquazana + Berkley filter is 375, Can I rely on this device or on my filters?
ОтветитьHumans we me you are part of this action
ОтветитьIts like theft of natural resource for uneccesary marketing money making purpose
Nature has bestowed water as free, these multinational corporation simply stealing ground water ,america is only a country of legal criminals who for money can take your life by exhorbitant medical expenses and basic need like water
i beat you my LA water is 450+ PPM
ОтветитьWhen you boiled arrowhead water you probably can see how dirty is it
ОтветитьI made rodi water (0ppm)
I added himalayan pink salt, and now it's 450ppm. Is that too high?
the ppm didnt appear on the monitor, please do instruction where and how to change the mode to ppm measurements? thanks
ОтветитьThanks for clarification on the PPM and disolved solids. People think low ppm equals highest quality water and no contaminants. A TDS/ppm meter is a nonselective measurement and cannot differentiate among different ions. A more sophisticated piece of equipment is needed to perform those types of measurements.A TDS tester is not sensitive enough to measure toxic levels of lead, chromium-6, or arsenic, even if they are present in a sample. This is because the reading displayed on an inexpensive TDS meter is in parts per million, while things like lead, chromium-6, and arsenic are toxic at part per billion concentrations (1000 times lower). Using a TDS meter to measure ppb lead concentrations in tap water is like trying to use a car’s odometer to measure a child's height…. It's the wrong tool
ОтветитьTDS has NOTHING to do with the quality of the water 🤦🏻
ОтветитьIn questioning water quality, shouldn’t we also question the quality of any TDS instrument?
ОтветитьSo if you don't know what kind of minerals is in there whether they're good or bad what is the point of the test
Ответитьwarter
ОтветитьBottled water in America is the greatest scam ever. Most people cannot tell the difference, and tap water is equally safe or safer than all bottled waters.
ОтветитьI womder what well water would test. I love my well.
ОтветитьYou didn't clean your tester in between testing your different cups of water, you also talk a lot - I think your video could have been like 5 minutes shorter and more concise. You also don't need to hold your water tester in the water - just touch it and press hold = done.
ОтветитьSchool took me here
ОтветитьIm at the verge of just going full raw dawg and start drinking from the creek
ОтветитьStop the blabbing and just give the figures, you blabber bla bla bla bla bla bla after every test.
ОтветитьMines in the 500s w that same tester
ОтветитьI bought the same tester & my tap water is reading at 45 ppm.
Why are your readings so high?
Yeah? What about microplastic.....
ОтветитьBought the same tester.
My tap = 49 ppm
Fridge filter = 46 ppm
Thats the same pregnancy test my girlfriend and she said it was negative.... Now I See why!!!!!!!!!.........................
ОтветитьGood job...on cramming 30 seconds of content into a 10 minute video
Ответить