Тэги:
#3d_printer_comparison_2018 #Anycubic_Kossel_Vs_FLSUN_Delta #anycubic_kossel_linear_plus #anycubic_kossel_auto_leveling #anycubic_kossel_calibration #anycubic_kossel_assembly #anycubic_kossel_heated_bed #flsun_delta_3d_printer #flsun_delta_kossel #flsun_delta_kossel_3d_printer #flsun_delta_assembly #flsun_delta_3d #flsun_delta_3d_printer_review #flsun_delta_calibration #flsun_delta_3d_printer_assembly #flsun_delta_review #3d_printer_pen #3d_printer_2018 #3d_printer_foodКомментарии:
Hi - I don't know about the difference between the Benchies, but -- Both of them are absolutely unacceptably terrible.
I couldn't live with a print quality like that. - Just saying.
The Anycubic that I had printed well when it printed about 60 percent of the time it would mess up! They are no longer made!
ОтветитьShoot the nozzles with infrared thermometer. Definitely different temps and even extrusion differences obvious in the ship. Nice vid.
ОтветитьHow do these compare to the Anet A4?
Ответитьdon't buy either... belt driven arms... bleghhhhh
ОтветитьWhen I see the surfaces, it looks like to me, that your filament was a bit wet
ОтветитьGreat job Dylan on comparing the two deltas. The Any Cubic does look like the better way to go right now. Back when I bought my Flson delta there was no Any cubic choise yet. But I did manage to get the heated bed version for $169 bucks, so it was still a good deal and it still prints really well. I did have to replace the aluminum effector arms with carbon fiber as the glue joints fell apart. Also the all metal hot end unit on the Anycubic looks great !
Ответитьhate punks
ОтветитьDid you relocate the power supplies, or use a third party power supply for increased amperage?
ОтветитьI want started with 3d printing. Want buy Anycubic, what you mean about that? Its good choice for beginner?
ОтветитьWhat is the name of that rocket on thingiverse? Or do you have a link.
ОтветитьA 25-30C increase changed the appearance from matte to glossy. This is due to the crystalizing of PLA as it cools. One or both of those machine appears to have a skew in its thermocouple readings. Nice review, enjoy the relaxed nature and thoroughness.
ОтветитьDo you have auto leveling on the anycubic?
Ответитьplease get a lapel lavolier your mic sound is really grating
ОтветитьMost probably gloss/matte difference is due to temperature. It may say temp is same but it can be off by couple degrees on both printers. When temp is lower finish is more matte, higher temp glossier model. Try printing same model on one printer with different temps.
ОтветитьThis is the kind of stuff I like, a nice comparison. Cheers Dylan!
ОтветитьBoth discount codes not working
ОтветитьHey Dylan, nice comparison. We wish to answer the question raised in your video: the color differences of the printed model were caused by the printing speed. From the video, the ANYCUBIC Kossel printed the models at a higher speed than the other one. We are not saying which one is better but the ANYCUBIC Kossel handle it quicker ;-)
Ответитьactually, it would be awesome to see a side by side comparison between the anycubic delta quality and the other cartesian style anycubic that is like 300 dollars or more just to see what the build quality is like... I am kind of leaning toward the Any cubic delta right now after this review you made because of the affordability but you said the other one may be your favorite printer to date so it would be interesting to see if the extra money is worth it.
ОтветитьJesteś Polakiem? Jak ci się mieszka w Anglii
ОтветитьThe new Anycubic Kossel also has autolevel sensor. And it also now comes 80% preassembled so you will have it printing within two hours.
ОтветитьAre you going to make more yoyo tutorials in the future? (awesome vid Btw!)
ОтветитьDylan, when is the next MagicYoyo Audition?
ОтветитьI think your right Dylan. I built and reviewed the Flsun delta a month ago, "I was able to get the heated bed at the lower price as it was on sale at the time" but the effector arms are so cheep. Its aluminum tubing with fiber eyelet type bearings. The Any Cubic looks like much better effector rods and the metal hot end assembly looks way better. Good job showing both printer side by side. The FLsun did do a great job of printing for the money but the Any Cubic looks like a better built machine.
ОтветитьReally nice i been looking at both the printers and glad someone has a review on them!
ОтветитьLove your videos
ОтветитьI don't care about 3d printers. You know what we're here for... That sweet mohawk. I also like the one on the right.
ОтветитьNoice
ОтветитьI mean at least you've got em xd
ОтветитьNice
Ответить1st my dudes
Ответить