Комментарии:
Sir, i have a mexer xeynex1202sfx, and i am doing live broad casting on tiktok, but when i conect my phone to mixer, i only hear my voice not my audians, so please tell me how to setup to hear my guests voice on tiktok live
ОтветитьVery simple and super informative video - i got exactly that i need to know!
ОтветитьIs there a mixer you can recommend that has a decent headphone amp to drive high-impedance headphones? Trying to limit the amount of gear if possible.
ОтветитьHi , I have one question ? If i want to use Effect from mixer with my headphone ? Just Phones Out work with it ? Because I have an instrumental(Stereo) on one input and the microphone on another.. And if it's the FX SEND output that I have to use even though it's mono, how do I get stereo with the effects? Thanks for all your videos !
Ps: Another question , the HM-4 support Headphone 250 Ohm ? Thanks again !
And sorry if my english is not perfect , it's not my mother tongue.
thank youu so much dude, I have micro amp ha400 (behringer) and I don't know to connect it to my mixer (ashley premium-6). but because of your video, now I know how to connect it properly. I have a question, if I use main out method, which cable you to reccomend RCA cable to TRS cable or the one that you used? (TRS to doble TS cable )
ОтветитьAwesome as always. Cheers Jordan
Ответитьthanks for this video ! .. can i ask is it work with Goxlr mixer also ?
ОтветитьHi, Does the HM4 accept signal from line out
ОтветитьCan use this as a splitter to separate my powered speakers, the top separate and the bass separate ?
ОтветитьPerfect example of a how to video. I appreciate the direct follow through. This is incredibly helpful
ОтветитьIt was interesting! Thanks a lot. Is there any video with the profx 12? I am trying to use headphones for my in ears mix of a drumset with a few mics, but i want to be able to use the sliders to control the channel volumes. How should I connect that? Thanks!
ОтветитьThank you Kettner for this simple methods
ОтветитьThis is just so good and helpful brother. Blessings 🙏🙏🙏🙏
ОтветитьGreat Video and very respectful. Thank you for not treating your viewers as idiots pretending to be a clown to catch our attention..Bravo!!! On another matter, I am looking for a different solution, but not able to find a video that explains how to go by to do so. I am trying to get my computer sound to go to the Google Translate App (to get simultaneous translation) and simultaneously allow me to connect a set of headphones while allowing me to speak back to the person on the other side. I am not, by a long shot, a technical person, so I hope I was clear enough for you to understand what my needs are. I hope you can respond and my apologies for taking the liberty to ask..Either way, Great job..
ОтветитьVery well done! Thanks!
ОтветитьIs there any way to connect wireless headsets to the mixer for hands-free conversation?
ОтветитьYou can use this setup as an in ear band practice and recording right?
ОтветитьHow can I plug my headset (with microphone attached) into the mixer ? Thanks
ОтветитьHow can I use 3.5mm headphone/microphone combo connector to 1/4'' plug on the mixer ? Thanks.
ОтветитьHello! Please help me. I have a Yamaha Portable PA System with Bluetooth Stagepas 400BT. It has a console with only outputs for left and right monitors. Is it posible to use de monitor output to connect directly a in ear earphones using an adapter from 1/4 to 3.5mm? It also has a independent volume for the monitors.
ОтветитьExcellent presentation.
ОтветитьI have the Mackie ProFX12v3 mixer and it has a monitor fix jack. There is also a control volume pot and slider on the board. Could I connect the 4 way splitter to the fx jack and then connect a wireless device for IEM’s?
Ответить¾ Hedwig from Split (James McAvoy)
¼ Lou from Nightcrawler (Jake Gyllenhaal)
tell me I'm lying 🤥 😳🤣
What a great video and explanation of how everything works in a simple to understand way. Kettner Creative always comes correct. PEACE !
ОтветитьSo well explained, thank-you!
ОтветитьThank you!
Ответитьso if i want to split the output to 8 headphones
can i use 2 4-ch headphone amp, 1st connect to phone output, 2nd connect to control room ?
Thank you - well done!
ОтветитьSo If I am trying to run 2 sets of headphone amplifiers for a middle school rock band to do headphone practice. I had one balanced cable going from the left master output to the headphone amplifier. If I have another headphone amplifier should I just use the right master output to the 2nd headphone amplifier? Today, when I tried using the headphone output it didn't seem to work - do I have to all the channels on PFS solo?
ОтветитьGreat video! Quick question if we use the headphone outputs on a Mackie ProFX16 - will the faders control the volume we hear or will only the gain dial control what we hear?
ОтветитьGood night, how do you create in ear setup for a 4 mic setup with a separate producers mic?
Ответитьplease, I want to ask. if i have a personal monitor mixer behringer p16 and i have an analog mixer but i do not have a direct out . So what should I do ? i ahve only 2 aux
ОтветитьI'm not really new to music hardware however II am assembling my own setup for home / quiet band / online streaming
I plan on having an guitar + 3 amps + bass + keyboard + roland td17 edrum + 2 mic
my question are:
1. What do I need specifically to connect them all to one spot (make / model / brand / item links would be helpful)
2. We need to have the output be multiple IEMS/Headsets
I have the exact seem mixer and no matter the method of connection I’m getting a lot of hum any way to reduce it?
ОтветитьReally fantastic tutorial. Simple and straightforward.
ОтветитьWould love some advice! From my mixer, I am using a Bose tower as a speaker, so I have one main out and everything panned Left. I would love to use headphone monitors but will I be able to set it up so that I get sound in both ears?
ОтветитьThis is what I am looking for on my unit. thanks Jordan once again a very detailed explanations on all the features. thank you so much now I learned another today. I made a question comment on how to use another headset for my unit a few day's ago, now you can ignore that question. thank you
ОтветитьAwesome! Thank you!!!
ОтветитьWhat a blessing when you find somebody with such an indept and clear explanation, put in understandable and easy to follow words.
Thank you so much!
Thanks for the concise yet informative video.
Ответитьgreat video thanks for the understanding!
ОтветитьHas anyone been able to find the specs for the Mackie HM-4? Noise Floor, impedance, mw per channel? It's a great price and if it is transparent and drives the headphones better than the cheap audio interface amps (they always underpower) then this is a great improvement without buying audiophile amp snake oil.
ОтветитьCan i use the headphone output if i use an in ear monitoring system like the Xvive U4 or does that have to go to directly to an aux input channel? the version of this mixer we have is the ProFX12V3 with 1 aux output.....my drummer likes to use a wedge and I like In-ears. So wasn't sure the best way to give us both what we want
ОтветитьHello Kettner, I have an importante question: How can I get the sound of the right main speaker into my right headphone and the sounds of the left main speaker into my left headphone....? I mean you said that with the phones output, I can hear the mix in stereo, but what does that mean? Am I going to hear the right speaker into my right headphone and the left speaker into my left headphone?
ОтветитьWhat happens if your headphone jack out of your mixing board is only playing on one side of your earphones
ОтветитьInfo packed. Good stuff, fun listen
ОтветитьThank you, very well explained.
ОтветитьGreat information. Thank you.
Ответить