Комментарии:
I cured the resin with an UV light since the sun didn't come back. I should have mentioned that in the video since I forgot to film it.
ОтветитьIt worked for my car windshield. It wasnt perfect but it stopped the glass from spreading. a car windshield cost about $800
ОтветитьWhat about an iMac?
ОтветитьFor Scratches....., I used 50,000 Grit diamond powder and dremel with a polishing pad on it, dripped 3 in one oil on the pad, then dabbed the diamond powder on the pad and polished out my few scratches, including one I had right in front of the camera lens on the phone!.... came clear out, just polish at a slow to medium speed for a few minutes moving it around the scratch and back an forth over it, not staying in one spot.... just keep it moving, I had what looked like a perfect outcome!
ОтветитьIt looks like your sitting in a criminal interrogation room from TV?
ОтветитьI doesn't work
ОтветитьFinally some truth
ОтветитьI'm watching so I can repair my Galaxy S9 that has a small area where the screen was essentially crushed but still working. If this trick works for that phone, I'll then buy the replacement part I need to get it to charge again.
ОтветитьMoto Jojo
ОтветитьThe plastic sheets are just UV-clear plastic. The idea is to have minor capillary effect to smooth down the resin.
ОтветитьSlightly pushed down 🤣 sounded like you actually cracked the screen 😂
ОтветитьEven tho its an old vid.
1. Too much glue ya used. Less is more sometimes and this is 1 of those times.
2. That plastic sheet is not an activator. Atleast imho it's an applicator. Designed to spread the glue out and down into the cracks.
3. If this is meant for car windshields that are 1/4ish thick . it prob wont work on a screen thats prob 1/8 inch thick. Thats like saying use your ccw g19 to go hunt a grizzly. Diff things for diff applications.
4. Your windshield doesn't have an LCD with pixels behind it. So if it was punctured you'll definitely screw up the phone.
Either way good vid lol😂
Thank you for wasting my time. Why did you even bother to post this garbage if you weren't going to do it right?
ОтветитьDoes this mess with the touch or pressure sensors under the screen?
ОтветитьTLDR: yes
ОтветитьHi i applied uv tempered glass but after few days on the croner of edgeson the upper of end side uv glue is cured. So how can i remove it from my screen. I did try mbc petrol and nail polish remover any matetial that can remove it ?
ОтветитьI have this resin its not working
ОтветитьMajic jonbob he's regettin reading manual
ОтветитьThank u for sharing glas I didn't buy that product my phone damage screen 😢
ОтветитьOmg going on about the weather is killing me
ОтветитьWould u think it would work on the back glass as well?
ОтветитьI think it's kinda works, its not 100% but the crack is more unnoticeable than before
ОтветитьMe😢
ОтветитьMaybe if the phone is warm and hold the resin bottle in your hand so it’s warm also, first it would help the resin bleed into the cracks 🤷🏼♀️
ОтветитьYou didn't use the kit properly, to fill the cracks requires both pressure and vacuum, you skipped both steps to push/pull the resin INTO the crack.
ОтветитьI believe the screen should be clean and do not touch the screen with oily fingers
Ответить👍
ОтветитьO was told poxy is the best
ОтветитьUV torchlight is the best way to active it
ОтветитьI'm not saying it works. But perhaps reading the instructions and using all the tools they gave you could have made it work better
ОтветитьRead the damn instructions!
You are all wrong!
The orange bit with the suckers is for constant high pressure realise into a stone chip. If this is going to work you need to high pressure the resin into the crack. Not with spaghetti arms like what you did.
ОтветитьHello brother where are you from 😊😊
ОтветитьThanks for this review and test.
ОтветитьI think you just ruined the screen when you pressed the screen... but, I appreciate you doing the test. 👍
ОтветитьYou did a great job showing us the video
ОтветитьLol got a hairline crack on my galaxy 23 ultra and there's no replacement screens yet even if i wanted to pay the 200$ to fix it 😭 gonna try this tho
ОтветитьWill this work in the back?
ОтветитьNice bro 👌👌👍👍
ОтветитьMy curiosity is is it conductive so that way if you have electronic going through the digitizer it will still pick up your finger and stuff
ОтветитьThe Suction Cups are for Pooling the glass up so glue or Adhesive can get inbetween the cracks And cause proper adhesion
ОтветитьWhat is windshieldn repair kit? Is it a super glue????
ОтветитьHello, I have 2 s10 Galaxy phones, one has a broken screen. Can I just replace the motherboards? I wouldn't play with the screen, it's too sensitive. I only need pictures and videos. And that's all on the motherboard? Am I right? Thanks in advance for the answer.
ОтветитьThey are for trapping innocent people for crimes they ain't done same as DNa on covid test
ОтветитьJust got my new phone and I fucking broke the screen guard already
ОтветитьFuck me man i cracked my new s23ultra im actually gonna die a repair costs so much
ОтветитьI love delusional people 😂 “I slightly pushed down on the phone” NO!!! You pushed so hard you cracked and broke it. Does not say one thing about the crack fill.
ОтветитьIt is UV light, not full sun that you need
ОтветитьIt's the same on windscreens, that gel is often useless. I've never tried it on a phone before, but on a windscreen I found super glue works much better. I also found that if you apply it in stages and rub it in with your fingers to get it to penetrate deeply into the crack it forms a much better bond.
Ответить