Комментарии:
Algum BR na area? kk. otimo video, da pra entender mesno nao falando ingles.
ОтветитьVery good explanation
ОтветитьThank
ОтветитьPTL for this detailed tutorial! The instructions included with these units left out some key details, like configure the units to communicate BEFORE mounting them up in the air 🤦🏼♂️
Thanks again for this! Very detailed and helpful.
So, a nano station can’t be configured or used as a wifi access point directly with other devices? iPhones/computers etc. am I correct?
ОтветитьI want to configure nanostation m5 to provide the mobile and other devices internet
How can I do that
Thanks heaps for your videos. I have setup my Hikvision secruity system with 2 remote cameras using the Ubiquiti aerials. Your explaination made it super simple and of course made it affordable for me to get a better quality setup. 👌
ОтветитьExcellent. This is still very applicable. Just set up an M5 wireless bridge using this today. could not have done without these well described instructions.
Ответитьdo you like the NSM5 or the NanoBeam , 5AC gen 2 or the Airmax Rocket with antenna for PTMP applications?
ОтветитьHello, I'm going to try to connect a wifi as an access point with an M5 nanostation in the station, I don't know if it's possible?
ОтветитьThanks heaps. Your video is awesome. I have steup my M5's and they are communicating well, signal strength is very good. They are about 100ft apart. I have a Hikvision 16ch NVR and 6 cameras setup and working well on cables. I setup the M5's to add a camera remotely. I have no picture. I have the AP M5 plugged into the power injector POE port, the LAN port from the injector is plugged into Uplink on the switch and Port 1 from the switch runs to port 8 of the NVR. On the Station side I have the cable from the M5 running to the POE port of the injector, the LAN port to the switch (they say any port is fine for the TPlink TL-SF1005P) then the camera plugged in there as well. Any pointers would be appreciated. Cheers
ОтветитьHad this running for a week then unplugged it to move, and now the Ubiquiti antennas won't reconnect. Any ideas other than start over?
ОтветитьThank you so much. it is very helpfull video....
ОтветитьHow did you configure a remote router (mine is a Netgear router/WIFI AP) to redistribute the signal to local clients in the guest building? Do you assign it a static IP or allow it to receive an IP under DHCP? does it need to mirror the SSID of the source network or have its own SSID? any other config settings? thanks
Ответитьhello, can the two antennas be connected to each other from the ethernet ports on the poe adapters?
ОтветитьQuestion
The wifi at my house is great. Strong signal. All good. My shop is 200ft away. Good signal outside shop but weak inside because it's a steel building. Do I just need one NanoStation Loco M2. Mount it outside shop. Power it up POE. Then run the ethernet from that to my wireless router in order to have WiFi in the shop?
instead of going to a switch box can it instead be connected to a extension router?
ОтветитьUse this video! Best one still, six years later!
ОтветитьTHANK; VERY GOOD THIS VIDEO
ОтветитьHi Chris , you've tutorial to setup airMAX Rocket Station ? , thanks your'er the best
Ответитьthe best teacher ever
ОтветитьCan you setup using Apple iOS? Or do you need windows?
ОтветитьI got a used one, and was set up to use dhcp. I tried to log in, but didn't know the password, so I reset it. Now it doesn't want to get an ip. Nothing seems to work
ОтветитьI have two questions : One why did you get the DNS from ? question two do you use the same password that you used on the first station or each has a different password?
ОтветитьI have two old version of Nano Station Loco M5. One is 5Ghz Outdoor/Indoor MIMO 13dBi CPE. The other one is One is 5Ghz Outdoor/Indoor airMax 13dBi CPE. What is the difference and which one is better?
ОтветитьThis video saved me at my job. The guy that is supposed to teach me just runs through it really quick and expects me to know it all immediately. So lame. I now actually have a level of understanding of this ui now.
ОтветитьGood instructions.I will like to air view instructions.thanks
ОтветитьOnce connected could never join the network from any wireless devices?? Help
ОтветитьClean you bedroom you mamas boy
ОтветитьCan a device behind the access point ping a device behind the station? It only seems to work one way not both ways
ОтветитьThank you for the video, very useful and got it working first try!
ОтветитьI have set up my locoM5's but am having trouble, the signal in my secondary building is strong, but it says "internet may not be available" have tried resetting router etc...any ideas?
ОтветитьI plan on doing this to get internet to my new house, it’s less than 400 feet from my old house, will it be fast enough to play games online?
ОтветитьI'm buying a new laptop but It doesn't have a ethernet port ! :(
Do you know if I get a USB to ethernet adapter can I plug it in and use it to configure the nanostation ?
Like if the nanostation was on a different subnet could I "change adapter setting "
I know when I go into the page on a WiFi only laptop the Etherent 2 icon isn't there as it only being WiFi so would this pop up when an adapter is plugged in do you know ? Thanks !! 🍻
Does Uniquiti software have the ability to update CPE firmware remotely from your base station? How do WISPs handle this? Do they literally log into the individual device via IP on the network? Does ubiquity have a way to auto-deploy firmware updates across a fleet of deployed CPEs?
ОтветитьYou're really amazing 🤩
ОтветитьHey Chris, I know this is an old video, but it is still helping people. Do you have any videos that go in detail on the signal ratings on the dashboard, what they mean, and how to improve the link?
I have my link up and running, all seems fine, but I’m wondering if it could be better, optimized? Thanks from Oklahoma
its possible to connect m2 & m5? chri?
ОтветитьWhen setting up the station, under the SSID is a block that says “lock to AP”. What does this do?
ОтветитьGreat video sir!! I am going to grab a set of these to extend my network from my garage to a campsite across the road on another property we have and mount the receiver on my camper bus project. I now have a little more confidence on setting it up. Thanks, Tim
Ответитьwhy do you have two cables running from the main access point outside.I think it should only one cable running from it.
Ответитьvery easy to understand even for the ones who never heard of Nanostation before thank you
ОтветитьHow to connect to another side ..it's not working to my m5
ОтветитьCheers for this guide. Just used this to help my neighbor setup his NanoStation between his external garage and house.
ОтветитьWill you see signal strength on the back of the station or just the access point? I have the power and lan light on the station, but have signal strength on the access point.
ОтветитьJust wanted to say that this video was very helpful, even in 2021. This is a great product!
ОтветитьDNS address is universal for all routers?
ОтветитьThanks for your informative videos.. Helps a lot. Can an M5 Nanostation have more than one Station per Access Point? I'm trying to add a second station to my already working M5 in Access Point mode but the new station can't see the Access point. Is this possible to setup?
ОтветитьCan this be used for wireless Security Cameras?
ОтветитьHi there from Thessaloniki Greece!!! i had lost my wifi signal in my NanoStation M2 1 month ago and you really helped me to figure it out how to reinstall it to my internet connection. Great job, Continue to help us !!! bbb!!!
Ответить