Specna Arms M4 Repair & Warfet Fitting

Always amazes me the bodge jobs you see...especially in regards to PTFE tape...
Bane of my existence...I got a TM MP7 GBB second hand and every mag has the "PTFE fix" for the base plate seal...it never works, just order the correct size nitrile o-rings and put them in...

Love the vid but can we have less volume on the music when your talking

Are these Specna M4s any good? ive only ran ver3 and AK style guns but ive never really dabbled in ver2 guns, would you recommend this to someone who has never really used ver2 guns before?

Never had a problem using ptfe although I do agree not a permanent fix. if I ever do use it, it would go under the o ring to make it larger if I can't find new ones and the seal is crap

Is it advisable to use silicon spray over grease in a gearbox ? I've always used a neat careful and considered placement of gear grease on any metal on metal, and piston grease on well... the piston.


Side note, loving your style of presentation, hope to watch more of your stuff in the future.

Saw you using the tool to fit the bearings and flattening the new piston for perfekt fitment of the piston head and already knew this is one of the better teching channels on YT, great job! I noticed you only use silicone spray for lubricating the gears and bushings. Wouldn't PTFE grease be a better choice at least for the gears? I think silicone spray and liquid lubricants aren't able to withstand the bearing pressure between the gear teeth.

Getting my specna arms SA-E06 delivered today and was wondering if you think it would be safe to use the new titan LI-ION 11.1v batteries innit or is it gonny just strip the gears in it? It is an edge series rifle but want some people's opinions before I buy the batteries.

Love the vid! I was just wondering what your opinions are on the specna arms core AEG line are? Was thinking of getting the sa- c03 version. Cheers mate!

I fucking hate PTFE tape, or more the way Airsofters chuck it at everything FUCK OFF

Where abouts in the UK are you and do you have a way to contact you for work etc

How do you go about taking one of these apart?

I sent my E18 off to PatrolBase to fix the fire selector switch but for some reason they ignored it and only tested the other issue I asked about.

What cleaning spray is this mate?

Can i use CLP oil to lube the bearing and bushing ?

Hi again,sorry to always plague you with questions I was just wondering, do you think the specna edge series gearbox would withstand an m120 spring as thinking of a dmr

Would a cut off lever flapping about like that cause semi auto to cease working? I've been having this issue with one build and it's been driving me insane. I can open up the gear box with my eyes close at this point with as many times as I've opened it up.

full stroke precooked on a plastic pistons?

How much it cost for you to do this to an aeg?

I use an m130 spring in my specna arms eo6

Music too loud towards the end.

Good video. While testing air seal like that is good, what's even more important is testing the seal with the tappet, tappet spring, and nozzle forward.

I have only one question about it, does M4 Magazines fit into that?

Why use warfet when there are much better fets out in the market?

Then there is me with lamcer tactical

my edge litterally snapped in half within 1000 rounds,was brand new,i obviously got a lemon and it pisses me off for the price i paid

ok so upon binge watching your past vids, I hear alot of stop using sorbo, stop using ptfe tape etc. For the ptfe tape piece you always mention replacing the o-rings. Perhaps in your next vid with an AEG with compression problems may be a good idea to explain to folks how to size the o-rings appropriately. I only mention this because while you might be able to find them on airsoft supplier sites they are not a common item that they stock because they want you to buy another cylinder head, planned obsolescence in a sense, which is bullshit. Therefore you can get them from industrial supply sites and even hardware stores occasionally, but you have ot know how to size them to get the right ones. and next maybe explain to folks how to NOT use sorbo and still have good AOE, ie get your gears and piston from the same manufacturer, etc. just some thought for you about content.

Thanks for your videos their great.
I would like to ask you, i have a specna arms MK18 with orion gear box and X-ASR on it, i would like to instal a warfet do I need to rewire or can I reuse de wires already installed on it.?
thank you

Hi there Negative Airsoft, quick question, what gauge of wire do you use? I just rewired a friend's replica with 16 AWG and it was pretty hard to do so, do you recommend using 18AWG?

how do you like specna?

Agreed. Most people don't know that ptfe tape is also known as plumbers tape which is ment for things with threads or anything that screws like pipes for plumbing. I said to myself a new o ring and lub and it's fixed and sure as shit you did the same thing! Great videos

Why oh why did the customer decide to retain the metal bearing pistonhead?

They’re good for sod all other than slowing your ROF and cracking your gearbox shell!

Never understood why people by overpriced "Airsoft silicon" when you can get a big can from helfrauds for a 5er.

Subbed.

What grease do you use for gears? I've got a very shitty A&K Masada gearbox that I've just cleaned and needs regreasing.
Edit: I've partially solved the air seal issue I was having using your silicone method. Pretty sure I need a new piston though because it's still letting air through.

Would you suggest correcting AOE or not?

Very nice work. Great channel.

Can I ask, what is the liquid spray greace, that you using, and where can I buy it?

Does he say spetzna? 😂

...wow Brotherman thanks for the introduction to Simon Bichbihler Night Walk, the vid was good too.

How did you get the USMC on the lower receiver?

What spray lubricants do you use? Halfords classic super slippy silicone oil? Yours for only £999 per litre.

Lmaoo u sound like the Gordon Ramsey of airsoft techs 👌🤣👍

I subbed becuase ur the only person I can find who tells the truth about different products and doesnt lie

Why is this shit so fascinating?

Hello is there any way you could teach me how to insert the batteries, I have know clue at all

Came across this vid when looking up the gate warfet, safe to say you've earned a sub. You seem cool!

The video is great, but the audio mix in abhorrent. Please make sure the music doesn't completely drown out your voice.

Who the fuck installed that ptfe tape like that 😂