Why Your Whirlpool Ice Maker is NOT Working

Mine makes ice when it wants to this fridge is annoying

My ice maker is making ice but the ice isn't coming through the door what do I do

Thanks. This video helped.

I have that EXACT fridge and it stopped making ice about a year ago. I put a thermometer in the ice box and it only got down to 20°! Now what?

This really helped! I had pulled the ice tray out but didn’t look too closely - there were a couple ice cubes stuck in that on/off bar! 😅

I have the exact same refrigerator in your video. It stopped making ice yesterday, and I checked the temperature it is 10° just like you said, and the arm is in the down position, and it is not working. Any suggestions on what to check next?

Heck yeah nice video thx

These whirlpool ice makers are complete junk! I’ve had this unit a little for five years, I have already had to replace the entire icemaker because it quit working. Then every 2 to 3 months it freezes up or ice gets stuck in it, and I have to pull apart and disassemble the whole thing again. Whoever designed this piece of junk is an idiot.

Thank you so much. There was one little piece of ice stuck on that bar and that solved my problem! Brilliant and short video, very helpful.

Thank you, Sir, you just saved me and my family $$$$$. We appreciate it your help.

so my older whirlpool ice maker only makes ice when the ice storage bin is nearly half full??? then it rolls fine..wth

Hello looking forward to subscribe to this channel ASAP, but today I just purchased a brand new Whirlpool refrigerator, Whirlpool Model # WRS555SIHZ06 side by side, I have two questions, first I notice that in this new model I purchased today, the compressor shuts off anytime you open the fridge door or the freezer door, and then turn back on when you shut the doors, is that normal? the second question is, what temperature should the freezer side, and refrigerator side, be if you set the temperature at the factory recommended setting?

How do you adjust the size of the cubes in this maker? The typical adjustment screw isn’t behind the front panel.

soooooo helpful. Thank you!

My ice maker is at -5 degrees the arm is down and still not making ice. How do I get the unit out of there?

Business in the front. Party in the back.

Same exact fridge in this video, arm is down but it’s not 10°. What is a coolant issue?

Thank you!! This was very helpful and I was able to fix my icemaker.

Thank you. You just showed me how to turn on my ice maker 😊

Mine is not metal. My Whirlpool side by side refrigerator model ED5GTGXNQ00 has a white plastic ice dispenser drum which the blades near the door have broken. Do you have a part number you can give me to replace a plastic drum (not a metal one as in this video)?

What’s with the music

Keith I did what you said and it worked. Thank you!

Yep had an ice cube pushing the bar up 👍

What a worthless video.

My problem is ---- When I press the button the ice box does not come out ? I've been pulling and pulling but nothing is happening. What do I do ?

😢🎉

I am so glad I found your video. Now I can get the wife off my back.

I got a 2023 model it has a plastic arm and it doesn’t move much. I’m trying to drop it down but feels like it is going to break. What should I do

My ice maker is ~20-25 f. How do I fix that?

Thank you so much! You showed the problem and solution! My metal bar was kept up by ice that didn't drop! Thank you! Saved me a service call.

What about it's leaking from the icemaker? Replaced inlet valve.

I think i solved my mothers ice maker problem.
She is always fidle farting with temp and saw freezer set to warmest temp.

Ill report back if it fixes it

Mmmkay

Yup mines stopped making ice I’m ready to junk this thing I hear water dripping inside… what’s going on

I need help with service technician test number 44 displaying a number 12 followed by a number 23. I'm not sure which part I need to replace.

Whirlpool fridge would not dispense ice. The motor, below the cube bin, must turn the auger and blades in the bin when the user calls for ice. There's a coupling between the motor and the auger/blades in the bin. If water gets in the coupling at the top of the motor, it will freeze and block the coupling at the bottom of the bin from seating properly. So, the motor turns but will not turn the auger/blades. You hear kind of a clunking sound as the bottom coupling slips under the top. Clean out the ice, careful not to damage the coupling. When clear, the coupling can seat properly when the bin is inserted. We lost electricity for about 30 hours. Ice in the freezer started to melt, leaving water all around. When it re-froze later, the coupling was iced over.

Please tell me the make and model of your PTZ camera. Looks great and is it dependable?

What if it’s down instead of up and hasn’t made ice in a month

Thank you so much for this video.

Bless you!! Such as easy fix. ❤️

I have this exact model but I can not get the ice tray out. As hard as I push the button it will not release. Any thoughts?

Too short of a video

m kay

Trying to harvest ice in my ice maker and my ice maker is not filling with water

I have been having issues for the past couple years. It seems like every other cycle of ice, it jams up. Ice gets stuck and never fully pushed out. This may be due to the temperature, is there a way to change the temperature so it is 10 degrees or less?

Thank you!

Thank you! Thank you! It was a simple fix after watching your video. My metal bar was kept up by a ice that did not drop! You saved me a service call and I so appreciate it.

Thank you!!

My model doesn’t have an ice bar. Any ideas?