How To Remove Scratch From Car Window cerium oxide (full guide)

I think that most people just have light scratches on their windows and could go straight to polishing, I would never use sand paper on my window unless i had super deep scratches

Great video. I like you put the scratches in with a sandpaper as I have a few light scratches on the top of my rear glass after a bodyshop repair which I think was caused by sanding accidentally on the glass. I'm probably going to skip the sanding and go straight onto polishing

wow I just learned something good and new. Very good video.

Will this work on a crt tv

Okay so we just keep polishing until we can’t see that brown stuff no more right?

That was satisfying to watch. I have scratches on only my 2 front windows of my F150 from the previous owners rolling the windows down so much, so I’m gonna try and give this a shot.

What temperature is too hot?

Bastante explicativo seu vídeo, gostei muito de assistir. Como faço para adquirir essas lixas? Resido em São Paulo, Brasil.

Hello, my mazda windscreen has scratches what old wipers made so not deep but can bother me. Can I just apply polishing cerium oxide without using fine sand paper? Thx

I need help on my car too

Will this work on a glass aquarium?

will this work to remove pits from windshield?

This is a great video and resource for auto detailers who might want to add this service to their menu. Wiper scratches in the windshield and other light damage would probably be easily treated with your method and products. However, glass is much harder than paint and cerium oxide is a very aggressive abrasive. Either mask the paint or wash the car when you're finished. The technician wiped off the surrounding sling on the paint with a dry towel. He just installed a bunch of micro scratches and swirls to the paint on the door frame and adjacent roof area.

Other than that, cool video.

Wow..

Have you tried this technique on a ceramic glass stove top?

but does it not reduce the strength of the glass ?

Where can I buy this kit?

This was awesome, thanks for the safety advice too!

That’s crazy.

The most important thing mentioned in this video is the use of a respirator. DO NOT use a dust mask. The respirator with P100 filtering is necessary to prevent glass dust from getting in your lungs, causing them to fill with fluid, killing you. If you manage to just get a little in your lungs, you'll likely get silicosis and that will take longer, but the end result is still a miserable death.

I have the curium kit but I don’t have guts to sand paper windows. Is there one grit you would recommend ?

Question, a slurry of Tin oxide would also bring the same result with the final polish would it not?
Also when cutting why don't you guys run water when you polish the glass for temperature control like other stone industry's?

My phone is scratched up i cant see the results

Will a Porter Cable 7424XP with a 6 inch backer plate work these pads?

I have a 3 inch long scuff on the front of my aquarium that I'd like to address, can I go straight to the buffing compound not to remove, but to minimize the appearance of the scratch?

How do I find someone to do this??

so just use cerium oxide for water stains. incredible how they sell every product/brad to clean water stains and jus cerium oxide will do the trick.

Very good video 🙏🙏🙏

That is not a grinder. It's a buffer.

great job!! need to do this on my car

Mine is literally 1/2 inch from the edge of the passenger glass. Any advice since it's so close? I'm overseas.

Where are you located? I need this work done on my car

Where can I find this place

The windows in my truck are out of the door, will use waterhose and sandpaper.

I think you mean sand.

I tried the Abralon 360-500-1000. But for some reason they don't seem to last very long.

If the car window has a slight tint from the factory is this method safe to use. I have no idea how the original tint is applied, if its throughout the layers, on the inside or on the outside of the glass. Was worried , if it was on the outside then it could be removed when sanding and on the front windscreen would need to sand the whole panel including the edges to be uniform.

Usually, where I get scraches, is where dust blow into my window rubber gasket, and when I roll down the window it scratches it. So this is within that 2" area. What do you do then?

Is the tool the angle grinder or buffer/polisher?

You can use metherated spirts

Most comprehensive, short and clear explanation, thanks a lot!

Praying that this works b4 my old man finds out what I done while at the car wash …

Can that be done in the insight part of the windshield?

So is 100 - 107 the wanted temperature range?

What is the maximum heat range when trying to remove wiper blade arch marks? Thank you

Very good explanation

I didn't hear once through the whole process what heat temp to avoid, does anyone know?

İçeriden görüntü nasıl dalgalanma ve optik var mı dışarıdan herşey güzel görünüyor

I was going to replace all my windows. You saved me so much money thank you for this!