The Anycubic Vyper 3d Printer Is SERIOUSLY Impressive

Hello, great content. Do you think Anycubic Vyper could print prosthetic legs?

So what's the fix for the volcano extruder stringing? Besides retraction, could you lower the temp overall?

Small wentilator are usually louder then Big One

apart from being really informative about the reviewed printer, I liked your video just for how proud you make your dad :)

Great review I have a Ender 3 Neo and those springs on the bed when they need adjustment drives me nuts.

Im chasing upgrades for my anycubic kossel linear plus, anycubic no longer sells parts and my heated bed build surface is worn and get no adhesion anymore, where would i get a new build surface and some 3rd party parts or upgrades that will fit the linear plus..

Low reliability, don't buy one, mine worked fine out of the box and printed the owl test piece fine, I was stoked, then it couldn't print anything else without thinking there was a power outage every 10 to 30 min and aborting and not resuming. The power was fine. It's simply not a robust unit and destined for the garbage can like all the other Chinese crap. If you still really want this unit, do yourself a favor and get $300 in cash and burn it and save yourself the frustration of getting this 3D printer to do anything useful.

I put a buck converter between PSU and MB fan. I adjusted the pot on the converter until I achieved a noticeably quieter fan yet still producing good airflow. The machine is SOOO much quieter

I'd check the firmware of the other printers for an option to disable the touch screen beep. It's probably there and just not enabled to change in the interface. Disable it and compile a new firmware. My Ender 3 Pro had a video assembling guide on the USB drive that shipped with the printer. Compared to the printed guide, it was an easier and more efficient way to assemble it.

Is this large enough to print some marvel helmets?

Finaly i got my Anycubic Viper.The first one was destroyed during transport, the second was stolen during transport, but the third one arrived in good conditioning. But what a dissapointment. Whatever i do, it will not do automatic leveling.. First i have to put a metal object to the nozzle, then it is homing and starts to pre heat. In all the tutorials i have never seen or saw this. then it starts to level it but afer the first point it stops .Abnormal leveling point put off power and check wirering. I did check it, dubble chekend it but i cant find anything wrong. i dont know what to do now. Can you help me?

I'm new to 3D printing and was really confused what to get. Thank you for a great review. Just ordered one. Now to figure out what brand of filament to use. :)

I wonder if your "wet filament" was really a temperature issue. It's also probably related to the geometry, with the shorter line segments laying down differently than the longer lines below. Notice that both prints are clean down low and then suddenly get rough higher in the print. As the nozzle gets farther from the bed the ambient temperature drops off and the filament can lay down too cold. I suspect that you would find the layer adhesion to be poor in that part of the print as well.

Everything great but why not direct drive :(

This or the ender 3 s1.

Don't you need a cooling fan for this printer?

great review💥💯. Nice speech and rhythm and needed facts😁

Super video ! Would you recommend this printer or the Creality Ender 3 S1 Pro?

Looks like a Creality CR-6 SE. Same features and build space.

bought this printer and I'm losing my dang mind trying to get some clean prints, messed with the settings in every single way I can think of and I'm concerned that it won't get much better. After 250 test prints I might as well as throw this printer in the garage where it belongs. Esp after you calling the what came off your printer as "clean" or good. I wouldn't give that to a family member or put that on my phone.

Please can you share the file for printing tpu with the anycubic vyper?

I just purchased this same model and they now have a Vyper profile in Cura.

had nothing but problems printing on this piece of crap

Nice review! Just bought 3 of these to add to my farm!

I only understood like 3/4 things you said, but it sounds like this printer is perfect for a beginner like me. Also, "I don't see how it could take more than 30 minutes to set up", I'm a dumbass, it'll prolly take me an hour lmao

that temple was definitely based off of Chichen Itza, which is Mayan not Aztec.

FYI as a custom gaming PC builder, I heard you have an issue with the fan noise and that’s because it’s a low quality bearing fan. Next time you use one like this just go and buy a “Noctua NF-A8 PWM” 80mm premium quiet fan with the best airflow of any fan brand. Gets about 1800 RPM and is literally quite

Realy intresting. I got one and now dont make the automatic level.

Ok i just ordered one of these im a machinist retired and know nothing about 3D printing i liked your video and want to ask if you can point me in the direction I need to be studied if i find your info helpful i will support you thank you les williams

One year later, does the Vyper come with the wifi chip now?

is it better than a ender 5 pro

Its a year later, I just got mine, and there is still no assembly video.

Great review.. I just purchased the Anycubic Kobra model. The print quality to me so far looks real good. The one thing though is that It has the edge or lip material all around the part and is hard to get off. I noticed your parts did not seem to have this edge or boarder around the outside of the part. Could you maybe give me some suggestions out to get rid of this boarder? Then again I don't know what this boarder is called. Thanks, Dave...

I need to get rid of my ender 3 max (pain in the b...to get levelled), i like the Vyper but it's smaller so what should i get the size of ender 3 max but with the Vyper specs, need to be auto levelling and no damned springs under the bed, i'm so confused to many choices, thanks for your input.

Got this printer brand new for 150 Canadian, can’t say I have anything to compare it to. But it is super easy to use and works awesome. Would recommend

Duel AXIS is an upgrade too!! Check out the NEW FIRMWARE they have as well!!!

But is it better than the Prusa Mini?

I just did a full set of Voron parts on my Vyper. Solid printer.

yup its awesome.....junk. gotta love all the bought and paid for reviews. mine came nonfunctioning out of the box 3 1/2 months later ive got the replacement parts and installed them. its whisper quiet..... for a jet plane. oh and the magnetic plate powercoated yada yada yada... nothing sticks to it. this might be ok for someone well experienced in 3d printing. also the cura slicer software does not not include the anycubic vyper.

Just picked one up for sale on Amazon for $250ish. Cand wait to try it. I've got an ender 3 that I just can't get setup smoothly. Gonna sell it and move on to auto leveling.

That notification sound you sliced in is no bueno imo, I get why you would do it but from the viewers perspective it kind of rubbed me the wrong way

If you have Chitubox installed, Cura says thats causing it to crash. Odd but that is what Ive read.

I’ve been on your channel since the mono price mini and your mini head you printed with your JG aurora, I’ll never forget that live stream, good times🥺🥲🥰

Just bought one for $335 on newegg. Im so exited to get this thing! We use Ender 3s in my engineering class and thats what got me interested. After debating for months i finally got a printer.

Would you choose this or FLsun Super racer

They made you proud? You dont know what proud means. Zoomer dont use big words

I just received this printer yesterday. It comes with the SD card, however, my computer does not have an SD card reader...*facepalm*...I purchased the Anycubic Photon Mono X last month and it came with a USB stick, would have been nice if my Vyper came with a stick as well

Thank you for the video. Would you happen to have any video on how to get rid of the strings on my prints for the Vyper? Thanks!

Negative things seems to be addressed by anycubic. Fans aren't loud at all and hotend assembly connector is removable.
Machine it self is incredible well packed, sturdy and easy to assemble. Leveling works great first try.

Will you be reviewing the ender 3 S1?