Can You Use Godox Flash with Non Godox Lighting Equipment

Thanks for the info. I like the godox system. I have an R2PRO(O) on my Panasonic camera. and love that I can use my V1(N) flashes. I was thinking of getting another one of those and I think that if I find one cheap for any system, they will all work. But I also have an old Canon 580EXII that I don't use. and other older canon flashes. I'm wondering if I should give them some life to throw into the mix with a transmitter. Or should I just get another V1 on sale. If I was to get a canon transmitter for the Godox system, would I get ttl if I ever need it?

I thought Flashpoint and Godox were one and the same, "under the hood," so to speak. I own a Flashpoint AD200 and my Godox X2T triggers it every time. Please advise.

nice info.. can Nikon SB-800 compatible for X2T-N ?

Real question~I have a yongnuo YNE3-RX that has a top hot shoes were I have use other tiggers like the yongnuo yn-e3-rt and altura trigger to control all all my speed lights and it works~I'm wanting to pair it with a Godox X1R TTL Wireless Flash Trigger Receiver~Can the Godox work the same way~I wish to add a AD 200 but don't want to waste my flashes I already have~Its not like I do this for a living~
Thanks if you can qhelp on not~
Gordon

Question . Will the godox x2t godox ratio slave trigger a profoto studio light that has a built in receiver. My last slave did but the hot shoe broke off and am wanting to replace it

This is so helpful. I was wondering why I couldn't get my SB-700 and XT32N to communicate.

Thanks! What about the other way around? can I use my nikkon sb400 to trigger (master/commander) and slave Godox TT685N II Flash for Nikon Z7ii ? Rather than buying the godox trigger.

Amazing video. Right to the point. Thank you for sharing it.

didnt ask the obvious question..
sony camera, godox x-trigger (whatever type), godox nikon reciever, canon flash... will it work? and i dont mean if ttl or high speed sync, i wonder, will the flash fire?
the thing that confuses me about godox trigger (or any 3rd part triggers) is that it for instance says its sony model.. does it mean that both the hot shoe below AND above need to be connected to sony only (yeah i know sony is a bad example cause of multishoe, but who cares) or does it mean that it will work ON a sony camera but can send to any kind of godox trigger, no matter the -s -n -c -f type?

Thx & will join the FB group, however... (I'm American!)
Will a Neewer Speedlite NW320, on camera, trigger a system of Godox V860II-F 2.4G TTL in same channel? And no not asking about the optical slave.

Hey thank you so much for this info! I was sold a Photix Mitros+ & a Godox XPro TTL Flash Trigger in a bundle from a store called Mike's Camera in Dublin California. The sales person assured me that the two were compatible with each other. After months of trying, troubleshooting & researching I finally came across this video. Stores will hire anyone, it's sad how sales-focused things are.

Amazing video! Thanks for the explanation!
I really hope godox would make some receiver to bridge the Canon RT system with Godox X system...
Anyway, I just have one question left... What is the XTR-16S for?
I mean, I have a TT685C that already has radio (master and slave) but it has a wireless port to connect a XTR-16S.
What's the diference between connecting my X2T with the TT685C through it's intern radio or using the XTR-16S??

I guess I am visual, I would have like to see the diagram eg Xpro on top of my 850 with my AD200 with e Godox Receiver on my SB5000

Glad to have found this channel man great work

I want to know the question the other way round.... using Godox lights with non Godox triggers that are just 2.4g hot shoe triggers

You can put your Yongnuo transmitter on top of your r2t and get ttl and high speed sync functionality (at least with Canon) but the gotcha is that the Yongnuo lights all have to share group A and shoot at the same power level.

Hi, is there a Godox wireless flash trigger solution to fire in manual mode only (enough for me) a Canon Speedlight 600EX-RT with a Fujifilm GFX50R camera? Thank you very much.

Hello Robert. I just got a Neewer NW562 speedlight and i am trying to sync it with my Godox X1T Trigger.I have a Godox Ad200 pro so i am trying to see the possibility of using both at the same time with my trigger but no luck so far. Please any ideas?

After installing the x2t pentax trigger on my Pentax k-70, will I be able to trigger the tt685 lamps dedicated to canon with all the options like hss, ttl? In the godox offer I do not see lamps with the gn 60, HSS pTTL dedicated to the pentax at a reasonable price.

Another question. I have a Godox X1T-O. Can I operate an offshoe Godox flash with the transmitter that is made for Nikon? Would TTL and HSS of the Godox-Nikon flash work perfectly with my Olympus camera?

Please avoid these wishy-washy sentences. I come to your video because I want to know if my Olympus camera with TTL and HSS can make use of 3 Nikon flashes with TTL and HSS support when I use a Godox X1T-O transmitter with 3 Godox X1R-N's. Throughout the video you are so terribly insecure in your sentences, I still have no clue if I can achieve my goal or not.
Bye...maybe...

I am using two Godox V1n flash units. They are both sitting on light stands about three feet apart. Neither one is attached to the camera in any way,
One V1 unit is set to MASTER, the other is set to SLAVE. When I test the setup by pushing the flash (Green) button, the Master and the Slave both fire.
In use, the Master is fired by a connection into the 2.5mm jack with the other end of the cable set into a MIOPS+ trigger – the trigger fires the MASTER but the SLAVE does not fire.

I am still unclear about an Olympus E-M1 Mark III body and triggering Nikon flashes and one Phottix Mitros+ (for Nikon) flash, with Radio transmission?

Secondly, the Olympus body triggering Godox flashes with radio transmission?

Both scenarios hopefully with HSS.

a lot of Neewer, Hanhel, flashpoint, are all Rebranded goddoxes and will work.

Thanks a million, Robert! Tried to make working trigger and transmitter for half day. Fired out but couldn't control the power. Didn't know that sb-600 has to be in ttl. Works perfectly now. Cheers again!

Thanks

I am new to flash photography, just wondering if I can use both the godox V860II and ad200 at the same time? either I have a wireless trigger on top of my camera or I have the v860II that will trigger the ad200? Thanks

Sorry, I asked a question maybe a bit silly. I have an old camera flashlight (1980s camera flash), can I just plug it in on Godox X1T only, then I use a smartphone to trigger the flashlight.

Thanks. I have a Yongnuo 685 and I can't get it to work properly with the X1R. It won't adjust power and sometimes won't even fire. Do you know why? I'm using X1T commander.

i really dont see replies to others on the comments. well i guess i will give this a shot. i have a YN568EX II and wanted to know if i just need the godox receiver and transmitter to use HHS and ettl, ttl

I have both godox and elinchrom, can I trigger my skyport trigger with godox x1 receiver, so that I can use elinchrom dlite also

Hi mate, great video, very clear, and helpful thanks 🙏🏽

Does the non Godox lighting need to be in TTL?

Useful

Hi Robert, I have an XproN-trigger and an X1RN receiver and I want to use it to trigger Nikon SB-700 in manual mode. Is the a way to change flash setting without touching the flash? It also look out of synk at the moment.

at least someone who understands what context is. Thanks for the clear message.

neewer q3 with godox x1tn is it possible????

i heard you earlier you can fire HSS with the nikon SB-900 with the godox x1r-N using an Xpro N did i hear you right?

Dear People, please help me to finally understand one thing. If I connect my other brand speed light to Flashpoint R2 Single Pin Transceiver will I be able to control everything with my Flashpoint R2 Pro MarkII 2.4GHz Transmitter?????

Is it possible to trigger and control independently Hensel Integra lights with this Godox trigger? Thanks!

Can my Nikon SB 600 be used with X1R-N receiver to fire with my Godox system?

Hi Robert, my name is Robert too. I have an XproN-trigger and an X1RN receiver and I want them to get to work with a Yongnuo YN565EX speedlite. No I quite understand how to set both the transmitter as well as the receiver. However, I am not quite sure about what the settings on my speedlite should be. For instance, this type of speedlite supports TTL but when I hook it up to the Godox equipment and I change the settings on the transmitter from TTL to M, nothing actually happens on the speedlite. (It flashes but it does not change from TTL to M) Could you please help me out? Thanks a lot and greetings from Holland.

always great videos - thanks. i have the xpro with the x1 receiver to power my sb800. i noticed groups a thru d work well in adjusting power, but cannot get it to cooperate in group e. also, cannot control the zoom function for the sb800 from the xpro. any suggestions?

I have to be careful when using my Nikon SB5000 speedlight with my Godx V1 speedlights on high-speed sync. As long as I use a shutter speed of 1/250 it works well. And, I always use manual exposure control.

Hi Robert, thank you for the time you put in. I recently added the new Godox X2Tc trigger to my other FP/Godox equipments and I am trying to use the X2Tc as a receiver only for my R2pro2 commander/controller but they are not communicating! I have tried every possible way and checked out the menus but no go! Are we not able to use the X2Tc as a receiver w/R2pro2 as a master controller? Thank you in advance, we really enjoy your videos...

How do I change the light output on my sb700 from the Godox Pro transmitter without touching the flash?

Hi Robert
I would like to use an old single pin off brand flash unit with my X1R-N receiver. Can the X1R trigger the off brand flash through its hot shoe which is for nikon? If so, how do I set it up to use my old flash unit? I would like to avoid using the sync cord.

Can I get hss on my yongnuo speed light made for canon using x1rc?

Flashpoint R2 i-TTL 2.4G Wireless Receiver For Nikon Flashes (X1R-N)
can it fire an alien bee using a cord like pocket wizards?

I hav 5Dmk4 with XProC.. I hav a Nikon SB600 along with X1R N. Though I'm able to fire d Nikon flash, I'm unable to control d flash output from d XPro. I tried d technique of using TTL on d flash and manally adjusting the power from d XPro C. Any solution ?