Комментарии:
There is indeed an error in the counterweight setup here, after balancing the tonearm over the platter youre supposed to move just the counterweight dial (itself) to zero which was omitted and will really frustrate someone - THEN you set the entire counterweights final tracking force - then you set the anti-skating control to match the tracking force.
ОтветитьThey didn't set this correct. The way they try to do it confuses the beginner. Just shows they don't know how to set things right correct. First you should put the weight on the back and set the tonearm where it is balanced. Then you change that dial to "0" first, before you do anything else. Once it is at zero then set it to the correct stylus pressure. Lastly set the anti skate to the same number.
ОтветитьMy AT-LP3XBT sounds wonderful ; however, that’s only through line outs - it is not Bluetooth pairing with my Edifier R2000 speakers (which are Bluetooth compatible, and this is the second turntable I’ve tried). Anyone?
ОтветитьCould i balance the tone arm with the stylus protector on?
ОтветитьHow to adjust the speed?
Ответить🇧🇷🤘🏻
ОтветитьDış güçlerin oyununu bozup ekonomiyi 1 dolar seviyesine getirince alacağım inşaallah bu makineyi. 😁
Ответитьwhy make it so effing hard aholes
ОтветитьAre the feet adjustable?
ОтветитьThanks, thought my player was busted but it was set on line not phono... saved me 500$ lmao
ОтветитьPlease tell me the original stylus of this turnable is MM or MC?
ОтветитьMaybe someone can help me. AT-LP3 - STYLUS DESCENT POSITION: the stylus does not descend onto the lead-in groove on the record during automatic play. How to adjust ? Thank you
Ответитьi just bought this lp3 turntable can you tell me where i can get a replacement stylus i would like to get an extra for a backup
ОтветитьAfter one week of using the AT-LP3, now each time i press the start button, the arm moves, touches the turning disc for a fraction of second, and then goes back to resting position and turns off. The manual usage is normal with no problem with the sound output. What could be the problem and How can i fix it?
ОтветитьSuper helpful video!
ОтветитьIs it possible to hear sound without plugging in the red and white wires? There is very little sound with the wires not plugged and I did not plan to buy a supplemental audio device.
ОтветитьMy sound System doesn´t have a ground connection. Is that an issue?
ОтветитьI’ve just purchased a AT-LP2X which is basically the same. 2nd day, 4th record played on this turntable and I’m getting a hum through the speakers. Trouble shooting says try making sure the head shell is tight. It’s tight. The only other thing is the grounding wire. I don’t have a grounding post on my amp but I have grounded it under one of the screws that holds the casing together. So I undo and re-tighten and it worked for one side of a record, then it’s back to the same hum...any ideas?
ОтветитьOlá! Algum brasileiro comprou este sistema de toca discos e recomenda?
Ответитьcan you play a 10 inch on this?
Ответить